Connective Peripherals USB2-F-7 01 Series Manuals

USB2-F-7x01 – Quick Start Guide © Connective Peripherals Pte Ltd Clearance Number : CP#033 Document Reference Number: CP_000043 USB2-F-7x01_Quick_Start_Guide Version 1.3 Congratulations on your purchase of the Connective Peripherals USB2-F-7001 or USB2-F-7101 USB to CANbus adapter. Getting started is quick and easy: General Installation  Detailed device driver installation instructions, port information and mechanical details are in the USB2-F-7x01 datasheet. This can be downloaded from: http://www.connectiveperipherals.com.  To begin, connect the USB cable to your PC USB Host or a USB Hub connector and the USB2-F-7x01. Power is supplied by the USB bus, so no external power supply is required.  Device drivers are needed for the PC to communicate with the USB2- F-7x01, and can be downloaded from: http://www.connectiveperipherals.com. To install the drivers , follow the following steps: 1. Download and unzip the drivers to a folder. 2. Connect the USB cable to your PC USB Host or a USB Hub connector and the USB2-F-7x01. Power is supplied by the USB bus, so no external power supply is required. 3. The Windows “Found New Hardware Wizard” will appear. Select the choices to install the drivers from a specific location, then browse to the folder just created when the drivers were downloaded from the EasySync website. 4. If a notice appears indicating that the drivers are not signed, select “Install Anyway”. 5. The Driver wizard will appear a second time. Repeat the steps 2 to 4 above to complete the installation.