Connective Peripherals USB2-H-5004 Manuals

USB2-H-5004 – Quick Start Guide © Connective Peripherals Pte Ltd Clearance Number : CP#029 Document Reference Number: CP_000039 USB2-H-5004_Quick_Start_Guide Version 1.2 Congratulations on your purchase of the Connective Peripherals USB2-H- 5004 High Speed USB to quad port RS485 adapter. Getting started is quick and easy:  Detailed device driver installation instructions, port information and mechanical details are available in the USB2-H-5004 datasheet. This can be downloaded from: http://www.connectiveperipherals.com.  To begin, connect the USB cable to your PC USB Host or a USB Hub connector and the USB2-H-5004. Power is supplied by the USB interface, so no external power supply is required.  Device drivers are needed for the PC to communicate with the USB2- H-5004. If your computer is connected to the Internet, you can use the Microsoft Windows Update service to automatically download the latest WHQL-certified device drivers. Alternatively these can be downloaded from: http://www.connectiveperipherals.com. To install the drivers, follow the following steps: 1. Download and unzip the drivers to a folder. 2. Connect the USB cable to your PC USB Host or a USB Hub connector and the USB2-H-5004. Power is supplied by the USB bus, so no external power supply is required. 3. The Windows “Found New Hardware Wizard” will appear. Select the choice to install the drivers from a specific location, then browse to the folder just created when the drivers were downloaded from the Connective Peripherals website.