Contec CM-32L Manuals

Ver.1.00 CM-32L, CM-64L １ Signal monitor Accessory for Digital I/O CM-32L, CM-64L Left : CM-32M, Right : CM-64M Specifications, color and design of the products are subject to change without notice. Model Number of I/O channels Facilities for additional functions CM-32L 32 None CM-64L 64 STB input ACK output This product is a Signal Monitor for a CONTEC Digital I/O board/card. This product can monitor the status of the connected signal line or generates pseudo signals onto the signal line to debug programs and check their behavior. - Signal monitoring LED provide for every point. - Capable of generating switch-operated signals for all points. - Capable of checking digital I/O board/card operation without any external device connected. - Capable of checking operation of an independent external device. - Capable of supplying external power from this product if connected to an insulated digital I/O board/card. - Mountable on a 35-mm DIN rail using the DIN rail mounting adapter “DIN-ADP1” (separately priced). Item CM-32L CM-64L Number of I/O channels 32 64 Number signal monitoring LEDs 32 64 Number of pseudo-signal switches 32 64 External power supply*1 12 - 24VDC (depending on the board/card connected) 12 - 24VDC (depending on the board connected) Connector used CN1, CN2: 37 pin D-SUB connector [Female] DCLC-J37SAF-20L9 [mfd. by JAE, Female] equivalent Screw lock #4-40UNC CN3: MC 1,5/ 3-G-3,5 [mfd. by PHOENIX CONTACT] equivalent CN1, CN2: PCR-E96LMD [mfd. by HONDA] CN3: MC 1,5/ 3-G-3,5 [mfd. by PHOENIX CONTACT] equivalent Operating Conditions 0 - 50ºC, 20 - 90%RH (No condensation) Physical Dimensions (mm) 105(W) x 230(D) x 35(H) Weight 200g 260g Facilities for additional functions None STB input, ACK output *1: When the product is connected with a digital I/O board/card with an integrated power supply, no external power supply is required if the product uses that internal power supply. No external power supply is required when the product is connected with a non-isolated digital I/O board/card. DIN rail Mounting Adapter for Accessories : DIN-ADP1 AC adaptor (Input: 100VAC, Output: 12VDC 1A) :POA201-10-2 Accessories Specifications Features