Contec SPT-100A-22TP01 Manuals

Product Guide 21.5-inch model 4GB memory integrated type SPT-100A-22TP01 8GB memory integrated type SPT-100A-22TP02 Thank you for purchasing this product. The product you have purchased consists of the following items. Check, with the following list, that your package is complete. If you find any item either missing or damaged, please contact the sales representative you purchased the product from. For appropriate usage, be certain to read the Reference Manual before using this product. The following manuals come with this product. Visit our website and download them by entering the model type in "Downloads". Read them before using the product. Name Contents How to get Product Guide (This sheet) This lists the product configuration and describes the precautions Included in the package (Printed matter) Reference Manual This describes the hardware aspects such as functions and settings. Download (PDF) Download https://www.contec.com/download/ 1. About the Unit This product is an “All-in-One” PC with an integrated high-performance touch screen. 21.5-inch size of the display monitor is pre-installed, and more than 10 ports of rich, extendable interfaces are provided. 2. Product Configuration This product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer. *1 preset upon shipment 3. Safety Precautions Understand the following definitions and precautions to use the product safely. Safety Information This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources. Understand the meanings of these labels to operate the equipment safely. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. Handling Precautions DANGER  Always check that the power supply is turned off before connecting or disconnecting power cables.  Do not modify the product.  This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other applications that require a very high level of reliability. Do not use the product in such applications.  If using this product in applications where safety is critical such as in railways, automotive, or disaster prevention or security systems, please contact your retailer.  Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion. For battery replacement, contact your retailer as it must be performed as a process of repair.  When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws and municipal ordinances. For details on replacing the battery, refer to the Reference Manual. CAUTION  Do not use or store the product in a location exposed to extremely high or low temperature or susceptible to a rapid temperature change. Example: - Exposure to direct sun - In the vicinity of a heat source  Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this product with its interior pene- trated by water or any other fluid or conductive dust. If this product must be used in such an environment, install it on a dust-proof control panel, for example.  Avoid using or storing this product in locations subject to shock or vibration.  Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such products will cause this product to malfunction.  Do not use or store this product in the presence of chemicals.  To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or discoloration of the paint.  This product’s case may become hot. To avoid being burned, do not touch that section while this product is in operation or imme- diately after turning off the power. Avoid installation in a location where people may come into contact with that section.  CONTEC does not provide any guarantee for the integrity of data on storage.  Always remove the power cable from the power outlet before mounting or removing an expansion board and before connecting or disconnecting a connector.  To prevent corruption of files, always shutdown the OS before turning off this product.  CONTEC reserves the right to refuse to service a product modified by the user.  In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power cord immediately and contact your retailer.  To connect with peripherals, use a grounded, shielded cable.  Do not use any sharp-pointed object such as a mechanical pencil to touch the touch panel. Doing so may scratch the touch panel, resulting in malfunctions.  When the surface or frame of the touch screen has become dirty, wipe it with neutral detergent. Do not wipe the touch screen with thinner, alcohol, ammonia, or a strong chlorinated solvent.  Use your fingers to perform operations on the touch screen. Operations with the stylus pen on the screen might not perform well due to the pen you are using with.  LCD may have a few bright spots that are always on or a few black spots that are always off. Color irregularity may also occur depending on the viewing angle. This however is due to the structural characteristics of the LCD; therefore, it is not a product fault.  Be certain to use the bundled AC adapters and power cables. Also, do not use these AC adapters or power cables with any other devices.  Burn-in on TFT Display “Burn-in” may occur if the same display is retained for a long time. Avoid this by periodically switching the display so that the same display is not maintained for a long time. * Burn-In: Phenomenon characterized by a TFT display as a result of long-time display of the same screen where a shadow-like trace persists because electric charge remains in the LCD element even after the patterns are changed.  The backlight lifetime of the touch screen display. The rated life of the backlight is 30,000 hours or longer. *Ambient temperature25°C±5°C, I F =110mA, Drops to 50% of the initial luminance. 4. About the handling of the battery and the storage battery in EU signatory Note: This symbol mark is for EU countries only. This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-users and Annex II. This symbol means that batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%) These ingredients may cause serious hazardous for human and the global environment. Please refer to the Reference Manual for the detailed specification, removal, and disposal of the battery. 5. Nomenclature of Product Components [Product Front] [Display section Rear] [Display section Bottom] [PC section Connector] Setup Procedure Document DVI-Analog RGB Conversion Adapter Serial Number Label Setup Procedure Document END USER LICENSE AGREEMENT Recovery Media CFast User’s Guide CFast User’s Guide Cable Tie x 2 AC Adapter For PC DVI Cable For Display *1 Stand Wiring Cover AC Adapter For Display AC Power Cable For Display USB Cable For Touch Screen *1 AC Power Cable For PC Product Guide Product Guide IPC Precaution List IPC Precaution List Warranty Certificate Warranty Certificate END USER LICENSE AGREEMENT (EULA) USB removal prevention fitting (angle) x 6 Washer assembled screw (M3 x 6) x 6 Washer assembled screw (M3 x 8, black) x 4 Washer assembled and cross recessed hexagonal bolt (M4 x 10, black) x4 Product Touch screen display Display section PC section Menu screen button ↑ button ↓ button Sslect button Display power button USB2.0 USB3.0 POWER-LED DC-IN MIC IN POWER SW LINE OUT CFast1 CFast2 DVI-I LAN A LAN B SERIAL A STATUS LED ACCESS LED

Reference Manual CONTENTS STAND-PC 21.5-inch model, 4GB memory integrated type SPT-100A-22TP01 STAND-PC 21.5-inch model, 8GB memory integrated type SPT-100A-22TP02 Introduction .................................................................. 5 Safety Precautions .................................................... 11 Product Nomenclature and Function................ 18 Hardware Setup......................................................... 31 BIOS Setup .................................................................. 42 Appendix ...................................................................... 71 Customer Support and Inquiry ........................... 93