Control SR260 Manuals

Supported models • SR260 System Remote Control-English (C4-SR260) • SR260-I System Remote Control-Iconic (C4-SR260-I) Introduction The Control4® SR260 System Remote Control goes beyond a typical “universal” remote that simply learns IR codes from TVs, VCRs, CD players, and DVD players. This remote control offers complete system control in an elegant and compact design. The remote is equipped with a full-color screen, battery gauge, hidden ambient light sensor, faster processor, iconic button layout (C4SR260-I model), improved List Navigator, nine programmable shortcut buttons, and more. It’s included with the purchase of select Control4 controllers, and can also be purchased separately. The SR260 requires Control4 OS 2.7 or later. Use this guide along with the SR260 User Guide. Use the remote to: • Navigate system menus and access network-stored media on a TV or monitor with the on-screen Navigator • Navigate system menus and access media information on the remote’s display • Control all system devices Features • Bi-directional communication with system components • ZigBee® wireless mesh networking technology • Full access to system components • Full-color screen display • Back-lit keys and display for ease of use in dark rooms • Ambient light sensor for efficient control of backlighting • 50 buttons total: • Two quick-access buttons (WATCH and LISTEN) to display either the most used AV devices or a list of all available AV devices • Nine programmable buttons • Eight transport control buttons • Standard alphanumeric buttons • Control4 button • Paging functionality • Standard control features for digital satellite systems (DSS), cable boxes, tuners, digital video recorders (DVR), DVD changers/players, CD changers/players, MP3 players, VCRs, or TVs • Built-in motion detection can wake up the remote automatically • Powered by four AA batteries (included) SR260 buttons B C D E F H K N Q O R T U S P M L I J G A SR260 English B C D E F H K N Q O R T U S P M L I J G A SR260-I Iconic ROOM OFF—Turns off devices in room Display—Screen that displays color text options WATCH—Displays video devices Control4 button—Displays Control4 Home page on TV LISTEN—Displays audio devices LIST—Displays system’s menu (Navigator) on the display screen Programmable buttons—Functions vary GUIDE—Displays TV program listings ▲PAGE/PAGE▼—Scrolls pages up or down PREV—Returns to previous channel or screen VOL—Controls device volume SELECT and directional buttons— Scrolls up, down, left, or right; the center SELECT button selects the menu option A J D G B K E H C L F I CH—Scrolls up or down through TV channels MUTE—Toggles device sound off or on INFO—Shows program information MENU—Accesses device features and settings CNCL—Sends “Cancel” or “Exit” command DVR—Controls the DVR Playback control buttons: • Rewind/Fast forward—Rewinds or fast forwards • Skip back/Skip forward—Skips back or forward • Play—Plays • Record—Starts recording • Stop—Stops • Pause—Pauses Programmable buttons—Functions vary Alphanumeric buttons—Directly enters channel numbers or text descriptions O N M R P S T U Q Install and maintain batteries Install the batteries Install the four AA batteries (included) into the back of the SR260 according to the diagram in the battery compartment (with the + and - terminals aligned correctly). Battery use and care • Keep the battery contacts and compartment clean. • Remove the batteries from the remote if it is not going to be used for several months. • Extreme temperatures reduce battery performance. Avoid putting the SR260 in very warm places. Battery replacement safety rules Warning! To prevent a battery short, leakage or rupture: • Use typical AA Alkaline batteries only. • Do not mix battery types, such as Alkaline and rechargeable NiMH batteries. • Do not attempt to recharge a battery unless the battery is specifically marked “rechargeable.” • Never dispose of batteries in a fire. AVERTISSEMENT! Pour empêcher court-circuiter, fuite ou rupture de batterie: • Utilisez les accumulateurs alcalins typiques d’AA seulement. • Ne mélangez pas les types de batterie, tels que les batteries alkalines et rechargeables de NiMH. • N’essayez pas de recharger une batterie à moins que la batterie soit spécifiquement marqué « rechargeable ». • Ne vous débarassez jamais des batteries dans un feu. Recharging station A Remote Recharging Station is also available (sold separately) with a rechargeable battery to keep your remote always charged. For more information, see the Dealer Portal. Configure the remote Add and configure the remote control with Composer Pro. See the Composer Pro User Guide for instructions about adding devices. To configure the remote: 1 In Composer Pro, add and identify the System Remote Control SR260 driver to your project. 2 In the System Design view, select System Remote Control SR260 to view and change the remote’s properties. • Display Brightness—Sets the brightness of the remote’s screen, from 0 (off) to 100 (full brightness). • Keypad Brightness—Sets the brightness of the keypad backlight, from 0 (off) to 100 (full brightness). • Sleep Mode—Sets how long the remote stays awake after no activity. The default setting is 15 seconds, but can be extended up to 90 seconds or reduced to 10 to conserve battery life. • Battery Level—Displays the current battery charge level. • Channel—Displays the ZigBee channel set for the remote, which should match the ZigBee channel for the controller. • Gateway—Displays the MAC address of the ZigBee Server (usually your controller, unless you specify differently). • MAC—Displays the remote’s MAC address. • Firmware Version—Displays the remote’s current firmware version. • Watch/Listen Button Behavior—Sets whether the buttons show a list of available devices or only the most recently used devices. 3 On the remote, press LIST, then select Settings > Config. The following menu opens, where you can change remote control settings: • Display Brightness—Sets the brightness of the remote’s screen. • Keypad Brightness—Sets the brightness of the remote’s keypad backlight. • Motion Detect—Sets the remote to wake from Sleep Mode when it’s picked up. • Light Sensor—When enabled, adjusts the brightness of the screen and keypad backlight based on the light it senses in the room. • Text Color—Changes the List Navigator’s text color. • Recharge Station—When enabled, configures the remote to use the Recharging Station’s rechargeable lithium polymer battery. When disabled, configures the remote for regular alkaline batteries. • Battery Level—Shows the current battery charge level. • Factory Defaults—Resets the remote to its factory defaults. Each change is saved as soon as it’s made. SR260 System Remote Control Installation and Setup Guide