Convoy 5000 Performance Series Manuals

Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph (888) 565-2583 Owner’s / Installation Manual 5000 Performance Series Dome Interior Camera Mounting the Camera Warning: ensure all power remains off until installation is completed! Maintenance Specifications 1) Select a position to mount the camera that is free of obstructions and moving parts and has a proper viewing angle of the de- sired area in the vehicle. 2) Remove the camera dome from the camera by loosening the screws. 3) Use the camera’s bracket as a mounting template to drill mounting holes. Align the mounting bracket with pre-drilled holes then secure bracket with appropriate screws. 4) Route camera cable along with existing factory harness where available, avoiding moving parts. 5) Reinstall the camera dome on the bracket using the supplied screws, once view is adjusted into position. • Ensure Power is off before installation to prevent CCD and monitor damage • Ensure the system power is off before connecting or disconnecting of equipment • Use a microfiber soft, damp cloth to clean the camera lens. Image Sensor: ⅓” Sony CCD (WDR) Resolution: 967 x 494 S/N Ratio: ≥50dB Lens: 2.8mm Min Illumination: 0Lux (LED on) IR LED: 15pcs Night Vision Distance: 35ft Environment: IP66 Horizontal Angle: 95° Verticle Angle: 72° Overview Interior Dome Camera, designed for Driver monitoring of interior of bus, RV, and other in-vehicle/trailer ap- plications. Camera is protected by the dome, has 35ft IR capability in total darkness, along with a wide viewing angle. Specifications Continued: Case Material: ABS Plastic DC Power: 12V Current: <1A (DC12V), <10W Operating Temperature: -30° ~ 70° C TV System: NTSC Dimensions: 120mm dia x 60mm H Troubleshooting Symptoms Solutions Cloudy Image Clean Dirty Camera Lens, camera dome inside and out No Power / Image Check Power Connections Unstable Image Check Mounting Hardware and Camera Connection for tightness