Coolaroo AutoSun Custom Made Manuals

CUSTOM MADE EXTERIOR SUN SHADE M O T O R I Z A T I O N I N S T R U C T I O N M A N U A L 4YR Limited Warranty 2 You may also need Wand STEP 1 (G) Shade (D) Bottom Rail Cap with ring (F) Bottom Rail (A) Full Valance (Motorized) (E) Quick Mount Brackets (B) Battery (C) Solar Panel This device complies with part 15 of the FCC Rules. Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. ATTENTION: For the French instruction manual, please visit www.coolaroousa.com. 3 IMPORTANT: PLEASE READ PLEASE PLACE YOUR AUTOSUN™ SOLAR POWERED EXTERIOR SUN SHADE IN THE SUN IMMEDIATELY. PLEASE PLACE YOUR BATTERY CONNECTED TO THE SOLAR PANEL, WITH THE SOLAR PANEL FACING THE SUN. NOTE: a. Approximate installation time is 10-20 minutes. b. Two people may be required. c. Your custom blind comes with the motor, battery and solar panel on the right side. CARE AND MAINTENANCE: Your sun shade has been made of the finest materials. To clean your shade, simply rinse with water, scrub with soap or any non-abrasive cleaner, rinse and allow to dry. Do not store shade wet. In moist areas, roll blind down frequently to air dry. WARNING: It is strongly recommended that in strong wind conditions, your exterior sun shade is completely retracted to prevent damage to windows and your sun shade. You may also need: 4 F U L L V A L A N C E I N S T A L L A T I O N COMPONENTS Take all parts out of the box and ensure they are all present. You may also need Wire guide Wand Bottom exposed aluminium rail STEP 1 (G) Shade (D) Bottom Rail Cap with ring (F) Bottom Rail (A) Full Valance (Motorized) (E) Quick Mount Brackets (B) Battery (C) Solar Panel A. Full Valance (Motorized) x1 B. Battery x1 C. Solar Panel x1 D. 11-BRC Bottom Rail Cap with rings x2 E. 11-BRC Quick Mount Brackets x3 F. Bottom Rail x1 G. Shade x1