Costway HW67581 Manuals

www.costway.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Visit us: www.costway.com Follow Costway Please give us a chance to make it right and do better！ Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP! USER’S MANUAL Electric Standing Desk HW67581 Contact Us! Do NOT return this item. Contact our friendly customer service department for help first. E-mail US: [email protected] UK: [email protected] Before You Start Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard. www.costway.com www.costway.com IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following: ●Unpack all hardware bags and components to ensure you have all the parts. ●Use the tools included to assemble the desk, don’t use the incorrect tools to assemble. ●Do not climb, stand or sit on the desk. ●Do not place objects on the desk when moving. ●Check to ensure all bolts, screws and brackets are tightened on a regular basis. ●Do not place the table in a humid environment. ●Do not place heavy objects on the table when storing. There is potential risk of personal injury not to follow the instructions when in use. 02 03 www.costway.com www.costway.com Parts List A C E G I B D F H J Lift column*1 Base*2 Side bracket*2 Desk top*1 Power supply holder*1 Handset + Power supply Power cord M6 screws*24 L Tapping screws*4 K M4 screws*1 M M10 screws*8 Lift column*1 Frame*2 Motor Rod*1 5# wrench*1 6# wrench*1 cross screwdriver*1 G 1 G 2 H 1 H 2 J K L M I 1 I 2 I 3 D 3 D 2 D 1 H 3 H 3 G 2 I 1 L Step 2: Assemble the 2 sets of beam components as shown in the figure before use; Note:1. Pay attention to the card slot direction. 2. The Jimmy screws at the bottom of D1 and D3 cannot be tightened. Pay attention to the card slot direction D 3 D 2 D 1 D 1 D 2 D 3 Assembly steps Step 1: 1.1 The hand controller is fastened to the table with self-tapping screws using the supplied screwdriver . 1.2 After installing the power supply holder, set aside. H 3 G 2 04 05 www.costway.com www.costway.com Step 3: Fixing lift column and lift column to the table leg with M10 screws using the supplied spanner . A B M H 2 Step 4: 4.1 Assembling frame tightened with M6 screws using the supplied spanner . 4.2 Then install the two side bracket with M6 screws using the supplied spanner . H 1 H 1 H 2 M C A B prohibited removal H 1 J E J Step 5: 5.1 Lay the table board flat and put the table shelf on it. 5.2 Stretch the table frame to both sides. Align the screw holes and lock them with M6 screws using the supplied spanner . 5.3 Fasten the socket set screws on the middle beam. H 1 J Socket set screws Same side J H 1 06 07