Instruction manual [PDF] (20 pages)
- Brand: CO/Tech
- Model: Q1B-CH-2000-UK
- Format: PDF
- Key Aspects: Storage and Care Recommendations, Initial Startup Checklist, Efficiency and Calibration Tips
- Updated: 05.04.2026
- Source File: 1771328.pdf
- Pages: 20
- Description: Instructions for safe usage of the CO/Tech Q1B-CH-2000-UK.
Document Preview & Text Transcription
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Varmluftspistol
Varmluftspistol
Kuumailmapuhallin
Art.no.
Model
18-3118
Q1B-CH-2000-UK
40-6865
Q1B-CH-2000
ENGLISH
SVENSKA
NORSK
SUOMI
Heat Gun
Ver. 200812
ENGLISH
Heat Gun
Art.no.: 18-3118
Model: Q1B-CH-2000-UK
40-6865
Q1B-CH-2000
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact our Customer Services (see address on reverse).
Safety Instructions
•
If the mains lead is damaged it must only be replaced by a qualified technician.
•
Never expose the tool to rain or moisture.
•
Never point the heat gun towards people or animals.
•
Never block the nozzle by covering it or holding it too close to the object being
heated.
•
Dangerous and poisonous gases can be produced when warming i.e. paint or
varnish. Provide for good ventilation.
Warning – fire risk
The tool can become a fire risk if used improperly. Please take the following into
consideration:
•
Be careful when using the tool in the vicinity of inflammable materials.
•
Never focus the heat gun on the same area for extended periods.
•
Never use the tool in the proximity of explosive surroundings.
•
Heat can be spread to inflammable materials which not within sight.
•
Place the tool in a standing position after use and let it cool sufficiently before
putting it away for storage.
•
Never leave the heat gun unattended when it is on.
•
Never use the heat gun for drying clothes or as a hair dryer.
•
Overheating increases the risk for fire and explosions.