CPI Talos T6 Manuals

Talos T6/T8 TM Coupon Guide Flashes Meaning 10 Configuration coupon accepted and unit successfully programmed. 1 - 5 Coupon rejected. Number of flashes corresponds to the coupon section that was improperly filled out. Try again. 7 Coupon not read. Confirm the coupon correct and try again. This space is left intentionally blank. Initiating Coupon Mode 1. Remove the bill magazine 2. Use a pencil or a screwdriver to press this button to enter configuration mode, then reattach the bill magazine to initiate Coupon mode: When coupon mode is activated, the bezel lights will rapidly flash 1. Insert a completed configuration coupon 2. Watch the bezel LEDs and count the flashes when the configuration coupon is returned 3. Use this chart to confirm successful programming: Carefully cut coupon from this page or make one copy of this coupon. Copies are usable if made on a standard, carbon-based copier. Make one copy of the original at a time, as copiers tend to reduce the size of the coupon when multiple copies are made. Fill out the coupon using a #2 (HB) pencil. Fill in one block for each line. Do not mark the back of the coupon. Note that Talos units are preconfigured with the following options enabled: – Bill Ways Accepted: Four Way – T6 Bills Enabled: $1 - $20 – T8 Bills Enabled: $1 - $100 – Pulse Width: Gaming Short – Pulses Per Dollar: One – Interface Mode: Harness Enable – Acceptance Mode: Mode Zero 253158027 G1