CrimeStopper CA-5005 Manuals

CA-5005 Reverse Parking Sensor Features: • 2 Digit LED Numerical Distance Display (in feet) • Multi-Colored Bar Graph Display Indicates Distance to Object and Left or Right. • Audible Tones With Three Distinct Warnings • Compact Sensor Design DISCLAIMER: Under no circumstances shall the manufacturer or distributor of the BackStopper™ be held liable for consequential or incidental damages sustained in connection with the use or installation of the BackStopper™ Rear Detection System. The BackStopper™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle. Always check surroundings for safety when backing! +12V Back up Light RED BLACK Ground Beeper Display (Front Mount) Control System CA-5005 SYSTEM DIAGRAM Sensors L R L1 R1 50 Ft. (Extended Cable) (Rear mount) LOCATING THE SENSORS: 20" Minimun * Equal Distance * Between Sensors SENSOR INSTALLATION: 1. Carefully measure and mark sensor locations. Measure, double- check and check again. You are making permanent modification to the vehicle, make sure spacing and angles are correct! 2. Use the supplied 22MM hole sale drill to make sensor holes. 3. Route cable through hole. 4. Gently press in sensor. Hole clearance is critical, make sure sensor fits snugly, but not over-tight. Crushed sensors will provide inaccurate readings and false alarms. 1. 2. 3. CA-5004 Surface Mount Sensor 4. SENSOR ANGLE: SIDE VIEW Horizontal NO! Ground may interfere with sensor. 0-10 degree upward Optimum performance Downward O.K. (May not detect small or low to ground objects.) Tech Support (800) 998-6880 1770 S. Tapo St. Simi Valley, CA 93063 (800) 998-6880 www.crimestopper.com [email protected]