Crystal Eyes LED3-3040C-A Manuals

READ ME FIRST! Installation Instructions LED3-3040C-A, CS-A L.E.D. MEGA 3RD BRAKE LIGHT LED3-3040XC-A, XS-A 2007-UP SILVERADO / SIERRA 1. 2. 3. Unscrew the stock brake light. Keep screws for Step 10. Unplug stock connector from the light. Remove stock light. 4. 5. 6. From IPCW's MEGA 3rd Brake Light, unscrew 2 screws from each side of the LED light bar. Keep screws for Step 14. Unscrew 2 more screws from the bottom of LED light bar. Keep screws for Step 15. Separate LED light bar from chrome base. Plug in stock connector and test to make sure all functions work properly before installing it. Then unplug it. 7. 8. 9. Wipe clean vehicle's 3rd brake light area with slightly damp cloth. Do not peel off paper backing from bottom of chrome base. We do not recommend taping the light to vehicle as the adhesive might damage body paint when you try to remove it. Put the chrome base on vehicle by aiming its screw holes to vehicle's stock light screw holes making sure they line up. 10. 11. 12. Screw on the chrome base using original screws kept in Step 1. Insert the clips on top of LED light bar to chrome base. Plug in the stock connector from vehicle to MEGA Light connector.