CTC Union FMC-1000-PH Manuals

CTC Union Technologies Co., Ltd. Far Eastern Vienna Technology Center (Neihu Technology Park) 8F, No. 60, Zhouzi St., Neihu District, Taipei 114 Taiwan T +886-2-26591021 F +886-2-26590237 E [email protected] ©2015 CTC Union Technologies Co., Ltd. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice. Introduction FMC-1000-PH & FMS-1000S-PH are unmanaged Gigabit PoE (Power over Ethernet) converters that provide stable and reliable Fast and Gigabit Ethernet transmission. PoE technology describes a system to pass electrical power safely, along with data, on Ethernet cabling. The original IEEE 802.3af-2003 PoE standard provides up to 15.4W of power to the connected device. The updated IEEE 802.3at-2009 PoE standard also known as PoE+ or PoE plus, provides up to 30W of power. FMC-1000S-PH gives you the freedom to extend your 10/100/1000Mbps cabling distance by allowing connectivity up to 120KM over fiber. LED indicators signal the power status, UTP link & speed, fiber link & speed and PoE status. Features  Conversion between 10/100/1000Base-T and 1000Base-X or 100/1000Base-X SFP Fiber cable interface  Support IEEE802.3at/af PoE  Support LFPT (Link Fault Pass Through)  Support DIP Switch setting  Support jumbo frame 9K bytes packet  Support wall-mounting installation  Compact size for easy installation Specifications Ethernet Interface  Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T)  Interface: 1 x RJ-45 (shielded) connector  Speed: 10/100/1000M (Auto) Optical Interface  Standards: IEEE802.3u (100Base-FX), 802.3z (1000Base-X)  Interface: 1 x fixed fiber (FMC-1000-PH) or 1 x SFP slot (FMC- 1000S-PH)  Speed: 1000M (FMC-1000-PH) or 100/1000M (FMC-1000S-PH) Quick Installation Guide FMC-1000-PH FMC-1000S-PH 10/100/1000Base-T to 1000Base-FX or 100/1000Base-X SFP with PoE+ (PSE) Fiber Converter Specifications (Cont.) Switch Features  Store & Forward Switch mode or Pass Through Converter mode  Packet Size: 9K bytes  Supports IEEE802.3x Flow Control  Auto MDI/MDI-X  Duplex: Full/Half Power over Ethernet  1 PoE enabled port, End-span, Alternate A Mode  Supports IEEE802.3af 15.4watts PoE per port  Supports IEEE802.3at 30watts PoE+ per port  Positive (VCC+) pins 1,2; Negative (VCC-) pins 3,6  Data: 1, 2, 3, 6, 4, 5, 7, 8 Power  DC Input Power: 48~57VDC  Reverse Polarity Protection: Yes  PoE Power Budget: 30W  Consumption: Model Power FMC-1000-PH FMC-1000S-PH Input Power Consumption 32.3W 31.7W PoE Power Budget (W) 30W 30W Mechanical  Dimensions: 108 mm (D) x 74 mm (W) x 23 mm (H)  Mounting: Wall mounting (optional)  Weight: 90g (FMC-1000-PH), 80g (FMC-1000S-PH) Environmental  Operating Temperature: 0°C~50°C  Storage Temperature: -40°C~85°C  Humidity: 10%~90% (Non-condensing) MTBF (MIL-HDBK-217)  FMC-1000-PH: 774,378 Hours  FMC-1000S-PH: 749,556 Hours Certifications  EMC: FCC Class A, CE V1.0 - 2 - - 1 - [email protected] www.ctcu.com