Cub Cadet 528 SWE Manuals

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Operator’s Manual Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Form No. 769-08161 (May 29, 2012) Two Stage Snow Thrower — 524 WE, 524 SWE, 526 SWE, 528 SWE & 530 SWE Thank you for purchasing a Cub Cadet Snow Thrower. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation. If applicable, the power testing information used to establish the power rating of the engine equipped on this machine can be found at www.opei.org or the engine manufacturer’s web site. If you have any problems or questions concerning the machine, phone your local Cub Cadet dealer or contact us directly. Cub Cadet’s Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position. The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your machine, for more information. Thank You Record Product Information Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by standing at the operator’s position and looking down at the rear of the frame. This information will be necessary, should you seek technical support via our web site, Customer Support Department, or with a local authorized service dealer. Model Number Serial Number Product Registration and Customer Support Please register your product on our website, www.cubcadet.com. If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below: ◊ Visit us on the web at www.cubcadet.com See How-to Maintenance and Parts Installation Videos at www.cubcadet.com/tutorials ◊ Call a Customer Support Representative at (800) 965-4CUB ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write to Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019 To The Owner 1 2 Safe Operation Practices......................................... 3 Assembly & Set-Up................................................... 7 Controls....................................................................12 Operation.................................................................15 Maintenance & Adjustment..................................16 Service......................................................................19 Troubleshooting..................................................... 23 Replacement Parts................................................. 24 Attachments........................................................... 25 Warranty...................................................Back Cover Table of Contents Important Safe Operation Practices 2 3 Training 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly. 3. Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. 4. Never allow adults to operate this machine without proper instruction. 5. Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like. 6. Keep bystanders, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area. 7. Exercise caution to avoid slipping or falling, especially when operating in reverse. Preparation Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller. 1. Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes. 2. Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces. 3. Use a grounded three-wire extension cord and receptacle for all machines with electric start engines. 4. Adjust auger housing height to clear gravel or crushed rock surfaces. 5. Disengage all control levers before starting the engine. 6. Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual. 7. Let engine and machine adjust to outdoor temperature before starting to clear snow. WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing foreign objects. Failure to observe the following safety instructions could result in serious injury or death. CALIFORNIA PROPOSITION 65 WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA OperatOr’s Manual Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Form No. 769-06030 (June 30, 2010) Two Stage Snow Thrower — 524 WE, 524 SWE, 526 SWE, 528 SWE & 528 SW Customer Support If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below: Visit us on the web at www.cubcadet.com ◊ Call a Customer Support Representative at (800) 965-4CUB ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write to Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019 ◊ Thank you for purchasing a Cub Cadet Snow Thrower. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation. If you have any problems or questions concerning the machine, phone your local Cub Cadet dealer or contact us directly. Cub Cadet’s Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position. Thank You Record Product Information Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by standing at the operator’s position and looking down at the rear of the frame. This information will be necessary, should you seek technical support via our web site, Customer Support Department, or with a local authorized service dealer. MOdel nuMber serial nuMber To The Owner 1 2 Safe Operation Practices ........................................ 3 Assembly & Set-Up .................................................. 7 Controls ...................................................................12 Operation ................................................................15 Maintenance & Adjustment..................................16 Service .....................................................................19 Troubleshooting .................................................... 23 Replacement Parts ................................................ 24 Attachments .......................................................... 25 Warranty ..................................................Back Cover Table of Contents Important Safe Operation Practices 2 3 Training Read, understand, and follow all instructions on the 1. machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. Be familiar with all controls and their proper operation. 2. Know how to stop the machine and disengage them quickly. Never allow children under 14 years of age to operate this 3. machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. Never allow adults to operate this machine without proper 4. instruction. Thrown objects can cause serious personal injury. Plan 5. your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like. Keep bystanders, pets and children at least 75 feet from the 6. machine while it is in operation. Stop machine if anyone enters the area. Exercise caution to avoid slipping or falling, especially 7. when operating in reverse. Preparation Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller. Always wear safety glasses or eye shields during operation 1. and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes. Do not operate without wearing adequate winter outer 2. garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces. Use a grounded three-wire extension cord and receptacle 3. for all machines with electric start engines. Adjust auger housing height to clear gravel or crushed rock 4. surfaces. Disengage all control levers before starting the engine. 5. Never attempt to make any adjustments while engine is 6. running, except where specifically recommended in the operator’s manual. Let engine and machine adjust to outdoor temperature 7. before starting to clear snow. WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing foreign objects. Failure to observe the following safety instructions could result in serious injury or death. CALIFORNIA PROPOSITION 65 WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm. 4 sectiOn 2 — iMpOrtant safe OperatiOn practices Safe Handling of Gasoline To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately. Use only an approved gasoline container. a. Extinguish all cigarettes, cigars, pipes and other b. sources of ignition. Never fuel machine indoors. c. Never remove gas cap or add fuel while the engine is d. hot or running. Allow engine to cool at least two minutes before e. refueling. Never over fill fuel tank. Fill tank to no more than ½ f. inch below bottom of filler neck to provide space for fuel expansion. Replace gasoline cap and tighten securely. g. If gasoline is spilled, wipe it off the engine and h. equipment. Move machine to another area. Wait 5 minutes before starting the engine. Never store the machine or fuel container inside i. where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.). Allow machine to cool at least 5 minutes before j. storing. Never fill containers inside a vehicle or on a truck k. or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. If possible, remove gas-powered equipment from l. the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle. Keep the nozzle in contact with the rim of the fuel m. tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device. Operation Do not put hands or feet near rotating parts, in the auger/ 1. impeller housing or chute assembly. Contact with the rotating parts can amputate hands and feet. The auger/impeller control lever is a safety device. Never 2. bypass its operation. Doing so makes the machine unsafe and may cause personal injury. The control levers must operate easily in both directions 3. and automatically return to the disengaged position when released. Never operate with a missing or damaged chute assembly. 4. Keep all safety devices in place and working. Never run an engine indoors or in a poorly ventilated area. 5. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Do not operate machine while under the influence of 6. alcohol or drugs. Muffler and engine become hot and can cause a burn. Do 7. not touch. Keep children away. Exercise extreme caution when operating on or crossing 8. gravel surfaces. Stay alert for hidden hazards or traffic. Exercise caution when changing direction and while 9. operating on slopes. Plan your snow-throwing pattern to avoid discharge 10. towards windows, walls, cars etc. Thus, avoiding possible property damage or personal injury caused by a ricochet. Never direct discharge at children, bystanders and pets or 11. allow anyone in front of the machine. Do not overload machine capacity by attempting to clear 12. snow at too fast of a rate. Never operate this machine without good visibility or light. 13. Always be sure of your footing and keep a firm hold on the handles. Walk, never run. Disengage power to the auger/impeller when transporting 14. or not in use. Never operate machine at high transport speeds on 15. slippery surfaces. Look down and behind and use care when backing up. If the machine should start to vibrate abnormally, stop 16. the engine, disconnect the spark plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating. Disengage all control levers and stop engine before you 17. leave the operating position (behind the handles). Wait until the auger/impeller comes to a complete stop before unclogging the chute assembly, making any adjustments, or inspections. Never put your hand in the discharge or collector openings. 18. Always use the clean-out tool provided to unclog the discharge opening. Do not unclog chute assembly while engine is running. Shut off engine and remain behind handles until all moving parts have stopped before unclogging. Use only attachments and accessories approved by the 19. manufacturer (e.g. wheel weights, tire chains, cabs etc.). When starting engine, pull cord slowly until resistance 20. is felt, then pull rapidly. Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go. Broken bones, fractures, bruises or sprains could result. If situations occur which are not covered in this manual, use 21. care and good judgment. Contact Customer Support for assistance and the name of your nearest servicing dealer.

Power sTeerinG Zero-Turn Posi-steer™ power steering is at your fi ngertips to get the job done faster with effortless turning (on select models). The 530 sWe features heated hand grips for additional comfort and this function is optional on all other 500 series models. smart thinking to take on all conditions. cool BlUe™ sKid shoes our revolutionary cool BlUe™ skid shoes glide along surfaces for better maneuverability. The advanced, long-lasting material won’t rust or mar your driveway. easy operation makes for smoother clearing of your driveway. sinGle-hand chUTe conTrol 4-way chute control allows you to quickly and effortlessly change the direction and pitch of the snow you throw with one hand, so you don’t waste time. You will spend less time in the cold as you control where you want the snow to be thrown. cubcadet.com †See specifi cations for warranty information. innoVaTiVe FeaTureS For an incrediBLe eXPerience. ThaT’s The cUB cadeT adVanTaGe. 500 series Two-sTaGe snow Throwers 524 we 524 Swe 526 Swe 528 Swe 530 Swe FeaTUres UP To 30" clearinG WiDTH 21" inTake HeiGHT in-DasH HeaDliGHT 4-WaY sinGle-HanD cHUTe conTrol 12" sTeel aUGer anD iMPeller cUB caDeT ® oHV 4-cYcle enGine cool BlUe™ skiD sHoes 3-Year liMiTeD resiDenTial WarranTY† 1-Year liMiTeD coMMercial WarranTY† every one of the 500 Series Snow Throwers is built to clear the impact of winter’s biggest storms. innovations like zero-Turn Posi-Steer™ power steering, heavy-duty steel augers and powerful cub cadet® oHV 4-cycle engines mean these snow throwers start quickly and move effortlessly through the harshest conditions. The high-impact polymer chute makes clearing heavy snow and ice easy, so you’re out of the cold faster. More Power To oUTsMarT winTer’s worsT. ideaL For moderaTe To HeaVY, deeP Snow and wide areaS. ideaL For moderaTe To HeaVY, deeP, weT Snow, SLuSH, ice and wide areaS. LocaTe a deaLer aT cUBcadeT.coM innoVaTionS no one eLSe can deLiVer. an eXPerience no one eLSe can maTcH. ProVe iT To YourSeLF wiTH a TeST driVe. series Snow Blade Snow Thrower series 1000 P P series 2000 P P RZT™ P RZT™ S P Z-force® P Z-force® S P tank™ sz P tank™ lz P tank™ P tank™ s P MODEL 524 WE 524 SWE 526 swe 528 SWE 530 SWE Push button electric start Standard (110 volt) Oil fill tube Extended Clearing width 24" 24" 26" 28" 30" Intake height 21" Auger diameter 12" Auger design Heavy-duty serrated steel Impeller diameter 12" Drive system All-wheel/positive traction Steerable wheel/ positive traction Steerable wheel/ positive traction Steerable wheel/ positive traction Steerable wheel/ positive traction Grease fittings Standard Zero-Turn Posi-Steer™ – Power steering/trigger Power steering/trigger Power steering/trigger Power steering/trigger Speeds 6 forward/2 reverse Heated hand grips Optional Optional Optional Optional Standard Single-hand operation Standard Chute rotation 4-way/Multi-directional/200˚ Pitch control 4-way/Multi-directional/50˚ Chute High-impact/clog-resistant Chute clearing device Standard Headlight In-dash Tires 15" x 5" 15" x 5" 15" x 5" 16" x 6.5" 16" x 6.5" Tread X-TRAC™ Deluxe skid shoes COOL BLUE™ rust-resistant, non-marking, reversible Shave plate Steel Fuel capacity 2 qt. 2 qt. 5 qt. 5 qt. 5 qt. Engine 208cc Cub Cadet ® OHV 4-cycle 208cc Cub Cadet ® OHV 4-cycle 277cc Cub Cadet ® OHV 4-cycle 277cc Cub Cadet ® OHV 4-cycle 357cc Cub Cadet ® OHV 4-cycle Approximate weight 265 lbs. 265 lbs. 275 lbs. 285 lbs. 285 lbs. Warranty† 3-year limited residential 1-year limited commercial †See your local Cub Cadet Independent Dealer for warranty details. This brochure is for advertisement purposes only. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating the machine, read, understand and follow all instructions in the manual and on the machine. Specifications and programs are subject to change without notice. Images may not reflect dealer inventory and/or unit specifications. 773-05083 Printed in U.S.A. 7/12 © 2012 Cub Cadet 500 SERIES TWO-STAGE SNOW THROWERS Premium Tractor and zero-turn riding mower Snow Attachments See your local Cub Cadet Independent Dealer for details. (Weight kit and tire chains sold separately) Snow Blade and Snow Thrower attachments available for Cub Cadet Lawn and Garden Tractors and Zero-Turn Riding Mowers.

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Operator’s Manual Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Two-Stage Snow Thrower — 526 WE Form No. 769-05015 (June 24, 2009) Customer Support If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below: Visit us on the web at www.cubcadet.com ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write us at Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019 ◊ Thank you for purchasing a Snow Thrower manufactured by Cub Cadet LLC. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. Cub Cadet LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation. If you have any problems or questions concerning the machine, phone your local Cub Cadet dealer or contact us directly. Cub Cadet’s Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position. Thank You Record Product Information Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by standing at the operator’s positionand looking at the lower, rear section of the frame. This information will be necessary, should you seek technical support via our web site or with your local Cub Cadet dealer. Model Number Serial Number To The Owner 1 2 Safe Operation Practices......................................... 3 Assembly & Set-Up................................................... 7 Controls....................................................................12 Operation.................................................................15 Maintenance & Adjustment..................................17 Engine Maintenance.............................................. 20 Service..................................................................... 22 Troubleshooting..................................................... 26 Replacement Parts................................................. 27 Warranty...................................................Back Cover Table of Contents Important Safe Operation Practices 2 3 Training Read, understand, and follow all instructions on the 1. machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. Be familiar with all controls and their proper operation. 2. Know how to stop the machine and disengage them quickly. Never allow children under 14 years of age to operate this 3. machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. Never allow adults to operate this machine without proper 4. instruction. Thrown objects can cause serious personal injury. Plan 5. your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like. Keep bystanders, pets and children at least 75 feet from the 6. machine while it is in operation. Stop machine if anyone enters the area. Exercise caution to avoid slipping or falling, especially 7. when operating in reverse. Preparation Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller. Always wear safety glasses or eye shields during operation 1. and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes. Do not operate without wearing adequate winter outer 2. garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces. Use a grounded three-wire extension cord and receptacle 3. for all machines with electric start engines. Adjust collector housing height to clear gravel or crushed 4. rock surfaces. Disengage all control levers before starting the engine. 5. Never attempt to make any adjustments while engine is 6. running, except where specifically recommended in the operator’s manual. Let engine and machine adjust to outdoor temperature 7. before starting to clear snow. WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing foreign objects. Failure to observe the following safety instructions could result in serious injury or death. California Proposition 65 WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

Safety • Assembly • Operation • Adjustments • Maintenance • Troubleshooting • Parts Lists • Warranty Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush- covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 PRINTED IN U.S.A. READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION IMPORTANT OPERATOR’S MANUAL FORM NO. 769-01790 08/11/2005 Two-Stage Snow Thrower — Model 528 SWE 2 Finding and Recording Model Number Table of Contents BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate on the equipment and copy the information to the sample model plate provided to the right. You can locate the model plate by standing at the operating position and looking down at the rear of the snow thrower. This information will be necessary to use the manufacturer’s web site and/or obtain assistance from an authorized Cub Cadet dealer. This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says. Customer Support If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this unit, you can contact the dealer you purchased the unit from or choose from the options below: 1. Visit cubcadet.com for many useful suggestions. Click on Customer Service or the Service Locator to find the nearest Cub Cadet service dealer in your area. 2. To reach the Customer Dealer Referral Line, please call 1-877-282-8684. Customer Support .............................................. 2 Safety Labels ...................................................... 3 Safe Operation Practices ................................... 4 Setting Up Your Snow Thrower .......................... 6 Operating Your Snow Thrower ......................... 10 Making Adjustments ........................................ 14 Maintaining Your Snow Thrower ...................... 16 Off-Season Storage .......................................... 20 Troubleshooting ................................................ 21 Illustrated Parts List ......................................... 22 Warranty .......................................................31-32 www.cubcadet.com CUB CADET LLC P. O. BOX 361131 CLEVELAND, OH 44136 DEALER LOCATOR PHONE NUMBER: 877-282-8684 3. The engine manufacturer is responsible for all engine- related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more information. 3 1 Safety Labels WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before at- tempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! Your Responsibility Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. A chute clean-out tool is fastened to the top of the auger housing with a mounting clip. The tool is designed to clear a chute assembly of ice and snow. This item is fastened with a cable tie at the factory. Cut the cable tie before operating the snow thrower. WARNING: Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind handles until all moving parts have stopped before using the clean-out tool to clear the chute assembly. #HUTE#LEAN OUT4OOL +%%0!7!9&2/-2/4!4).')-0%,,%2!.$!5'%2#/.4!#47)4()-0%,,%2/2!5'%2#!.!-054!4%(!.$3!.$&%%4 53%#,%!. /544//,4/5.#,/'$)3#(!2'%#(54% $)3%.'!'%#,54#(,%6%2334/0%.').% !.$2%-!)."%().$(!.$,%35.4),!,,-/6).'0!243(!6%34/00%$"%&/2% 5.#,/'').'/23%26)#).'-!#().% 4/!6/)$4(2/7./"*%#43).*52)%3.%6%2$)2%#4$)3#(!2'%!4"934!.$%23 53%%842!#!54)/.7(%./0%2!4).'/.'2!6%,352&!#%3 2%!$/0%2!4/2g3-!.5!,      $!.'%2 #,%!. /544//, $!.'%2 !6/)$).*529&2/- 2/4!4).'!5'%2 +%%0(!.$3&%%4!.$#,/4().'!7!9 $!.'%2 .%6%2054(!.$).#(54%#/.4!#47)4(2/4!4).'0!243#!.!-054!4%&).'%23!.$(!.$3 3(54/&&%.').%!.$7!)45.4),!,, -/6).'0!243(!6%34/00%$"%&/2%5.#,/'').' 53%#,%!. /544//,/27//$%.34)#+4/5.#,/'$)3#(!2'%#(54% 4 2 Safe Operation Practices Training 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly. 3. Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent. 4. Never allow adults to operate this machine without proper instruction. 5. Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like. 6. Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area. 7. Exercise caution to avoid slipping or falling, especially when operating in reverse. Preparation 1. Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller. 2. Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes. 3. Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces. 4. Use a grounded three-wire extension cord and receptacle for all units with electric start engines. 5. Adjust collector housing height to clear gravel or crushed rock surfaces. 6. Disengage all control levers before starting the engine. 7. Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual. 8. Let engine and machine adjust to outdoor temperature before starting to clear snow. 9. To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately. a. Use only an approved gasoline container. b. Extinguish all cigarettes, cigars, pipes and other sources of ignition. c. Never fuel machine indoors. d. Never remove gas cap or add fuel while the engine is hot or running. e. Allow engine to cool at least two minutes before refuel- ing. f. Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion. g. Replace gasoline cap and tighten securely. h. If gasoline is spilled, wipe it off the engine and equip- ment. Move machine to another area. Wait 5 minutes before starting the engine. i. Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.). j. Allow machine to cool at least 5 minutes before storing. WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm. WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before at- tempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! Your Responsibility Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Illustrated Parts Manual 500 Series Snow Thrower —524 SWE & 528 SWE Form No. 769-03415 (August 8, 2007) 1 17 16 15 4 3 2 7 6 53 5 13 11 9 10 12 14 51 19 18 14 21 56 55 25 26 27 28 34 33 29 30 48 47 39 45 45 47 48 46 50 31 49 40 43 20 44 42 37 41 42 36 35 24 22 2 55 56 52 54 23 52 56 55 32 8 2 38 57  Auger & Auger Housing Ref. Part Number Description 1. 731-2643 Clean-Out Tool 2. 712-04065 Flange Lock Nut 3. 756-0981B Flat Idler Pulley 4. 710-0347 Hex Bolt, 3/8-16 x 1.75 5. 790-00080A Auger Idler Bracket 6. 736-0174 Wave Washer 7. 738-0281 Shoulder Screw 8. 738-0143 Shoulder Screw 9. 790-00075 Bearing Housing 10. 726-04012 Push Nut 11. 712-04063 Flange Lock Nut, 5/16-18 12. 741-0309 Ball Bearing 13. 732-04460 Extension Spring 14. 710-04484 Hex Screw 15. 731-04705 Chute Adapter 16. 710-0703 Carriage Screw, 1/4-20 x 0.75 17. 731-2635 Clean-out Tool Mtg. Bracket 18. 684-04305 Housing Assembly, Auger, 22” — 684-04259 Housing Assembly, Auger, 24” — 684-04256 Housing Assembly, Auger, 26” — 684-04257 Housing Assembly, Auger, 28” — 684-04255 Housing Assembly, Auger, 30” 19. 712-04064 Flange Lock Nut, 1/4-20 20. 618-04190A Gearbox Assembly, Auger, 22” — 618-04191A Gearbox Assembly, Auger, 24” — 618-04192A Gearbox Assembly, Auger, 26” — 618-04193A Gearbox Assembly, Auger, 28” — 618-04194A Gearbox Assembly, Auger, 30” 21. 790-5580 Skid Shoe, Standard — 790-00091 Skid Shoe, Deluxe — 790-05984 Skid Shoe, Plastic — 790-00141 Skid Shoe, Stainless 22. 710-0451 Carriage Bolt 23. 790-00117 Shave Plate, 22” — 790-00120 Shave Plate, 24” ­— 790-00121 Shave Plate, 26” — 790-00118 Shave Plate, 28” — 790-00119 Shave Plate, 30” — 790-00148 Stainless Steel Shave Plate, 26” — 790-00145 Stainless Steel, Shave Plate, 28 — 790-00146 Stainless Steel Shave Plate, 30” Ref. Part Number Description 24. 684-04057A Impeller Assembly 25. 717-04126 Worm Shaft 26. 721-0327 Oil Seal 27. 741-0662 Flange Bearing 28. 718-04071 Thrust Collar 29. 741-0663 Flange Bearing 30. 710-0642 TT Screw, 1/4-20 x 0.75 31. 790-00138A Bearing Housing 32. 721-0325 Plug 33. 736-3084 Flat Washer 34. 715-04021 Dowel Pin 35. 684-04108 Spiral Assembly- RH 36. 618-0123 Reducer Hsg.-RH (Incl Ref. 44-45) 37. 717-0528A Worm Gear, 20T 38. 725-0157 Cable Tie 39. 738-04124A Shear Pin 40. 714-0161 Hi-Pro Key 41. 736-0351 Flat Washer 42. 741-0661A Flange Bearing 43. 618-0418 Reducer Hsg.- LH 44. 711-04286 Axle, Auger, 22” — 711-04285 Axle, Auger, 24” — 711-04284 Axle, Auger, 26” — 711-04283 Axle, Auger, 28” — 711-04282 Axle, Auger, 30” 45. 684-04107 Spiral Assembly- LH 46. 714-04040 Bow Tie Cotter Pin 47. 731-04870 Spacer 48. 741-0493A Flange Bushing 49. 736-0188 Flat Washer 50. 741-0245 Hex Flange Bearing 51. 736-0242 Bell Washer 52. 629-0071 Extension Cord. 3-Prong 53. 746-04230 Auger Clutch Cable 54. 710-04525 Carriage Bolt, 5/16-18 x .750 55. 712-04103 Hex Nut, 5/16-18 56. 736-04216 Bell Washer, .340 x .872 x .060 57. 737-3000 Drive Lube Fitting  Auger & Auger Housing

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Operator’s Manual Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Two-Stage Snow Thrower — 528 SWE Form No. 769-04053 (July 25, 2008) Customer Support If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below: Visit us on the web at www.cubcadet.com ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write us at Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019 ◊ Thank you for purchasing a Snow Thrower manufactured by Cub Cadet LLC. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. Cub Cadet LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation. If you have any problems or questions concerning the machine, phone your local Cub Cadet dealer or contact us directly. Cub Cadet’s Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position. Thank You Record Product Information Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by standing at the operator’s positionand looking at the lower, rear section of the frame. This information will be necessary, should you seek technical support via our web site or with your local Cub Cadet dealer. Model Number Serial Number To The Owner 1 2 Important Safe Operation Practices...................... 3 Assembly & Set-Up................................................... 7 Controls & Features.................................................11 Operation.................................................................14 Maintenance & Adjustment..................................16 Service......................................................................19 Troubleshooting..................................................... 22 Replacement Parts................................................. 23 Table of Contents Important Safe Operation Practices 2 3 Training Read, understand, and follow all instructions on the 1. machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. Be familiar with all controls and their proper operation. 2. Know how to stop the machine and disengage them quickly. Never allow children under 14 years of age to operate this 3. machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. Never allow adults to operate this machine without proper 4. instruction. Thrown objects can cause serious personal injury. Plan 5. your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like. Keep bystanders, pets and children at least 75 feet from the 6. machine while it is in operation. Stop machine if anyone enters the area. Exercise caution to avoid slipping or falling, especially 7. when operating in reverse. Preparation Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/impeller. Always wear safety glasses or eye shields during operation 1. and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes. Do not operate without wearing adequate winter outer 2. garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces. Use a grounded three-wire extension cord and receptacle 3. for all machines with electric start engines. Adjust collector housing height to clear gravel or crushed 4. rock surfaces. Disengage all control levers before starting the engine. 5. Never attempt to make any adjustments while engine is 6. running, except where specifically recommended in the operator’s manual. Let engine and machine adjust to outdoor temperature 7. before starting to clear snow. WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing foreign objects. Failure to observe the following safety instructions could result in serious injury or death. California Proposition 65 WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

Safety • Assembly • Operation • Adjustments • Maintenance • Troubleshooting • Parts Lists • Warranty Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush- covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 PRINTED IN U.S.A. READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION IMPORTANT OPERATOR’S MANUAL Two-Stage Snow Thrower — Model SWE 528 FORM NO. 769-01791A 06/02/2006  Finding and Recording Model Number Table of Contents BEFORE ASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate on the equipment and copy the information to the sample model plate provided to the right. You can locate the model plate by standing at the operating position and looking down at the rear of the snow thrower. This information will be necessary to use the manufacturer’s web site or when obtaining assistance from an authorized Cub Cadet dealer. This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says. Customer Support If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this unit, you can contact the dealer you purchased the unit from or choose from the options below: • Visit www.cubcadet.com. Click the Customer Service link. • To reach the Customer Dealer Referral Line, please call 1-877-282-8684. • The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifica- tions, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more information. Customer Support............................................... 2 Safety Labels....................................................... 3 Safe Operation Practices.................................... 4 Setting Up Your Snow Thrower........................... 6 Operating Your Snow Thrower............................ 8 Making Adjustments......................................... 12 Maintaining Your Snow Thrower....................... 14 Off-Season Storage........................................... 20 Troubleshooting................................................. 21 Illustrated Parts List.......................................... 22 Warranty........................................................31-32 www.cubcadet.com CUB CADET LLC P. O. BOX 361131 CLEVELAND, OH 44136 DEALER LOCATOR PHONE NUMBER: 877-282-8684  1 Safety Labels WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before at- tempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! Your Responsibility Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. A chute clean-out tool is fastened to the top of the auger housing with a mounting clip. The tool is designed to clear a chute assembly of ice and snow. This item is fastened with a cable tie at the factory. Cut the cable tie before operating the snow thrower. WARNING: Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind handles until all moving parts have stopped before using the clean-out tool to clear the chute assembly. #HUTE#LEAN OUT4OOL +%%0!7!9&2/-2/4!4).')-0%,,%2!.$!5'%2#/.4!#47)4()-0%,,%2/2!5'%2#!.!-054!4%(!.$3!.$&%%4 53%#,%!. /544//,4/5.#,/'$)3#(!2'%#(54% $)3%.'!'%#,54#(,%6%2334/0%.').% !.$2%-!)."%().$(!.$,%35.4),!,,-/6).'0!243(!6%34/00%$"%&/2% 5.#,/'').'/23%26)#).'-!#().% 4/!6/)$4(2/7./"*%#43).*52)%3.%6%2$)2%#4$)3#(!2'%!4"934!.$%23 53%%842!#!54)/.7(%./0%2!4).'/.'2!6%,352&!#%3 2%!$/0%2!4/2g3-!.5!,      $!.'%2 #,%!. /544//, $!.'%2 !6/)$).*529&2/- 2/4!4).'!5'%2 +%%0(!.$3&%%4!.$#,/4().'!7!9 $!.'%2 .%6%2054(!.$).#(54%#/.4!#47)4(2/4!4).'0!243#!.!-054!4%&).'%23!.$(!.$3 3(54/&&%.').%!.$7!)45.4),!,, -/6).'0!243(!6%34/00%$"%&/2%5.#,/'').' 53%#,%!. /544//,/27//$%.34)#+4/5.#,/'$)3#(!2'%#(54%