Cub Cadet SS 418 Manuals

cubcadet.com CS202 SS418 ST228 ST428 BV228 BV428 BB230 CS511 CS552 Designed for trimming and edging. Designed for trimming and cutting of heavy brush and grass. Designed for all-purpose clean-up of yard debris. Designed for pruning and felling to cutting firewood. smarter features for a better experience. That’s the Cub Cadet Advantage. Handheld power equipment † See your local Cub Cadet Independent Dealer for warranty details. EFFICIENCY AT ITS FINEST Because the 4-cycle engine (on select models) doesn’t require mixing of oil and gas, you have less prep time and more fuel efficiency. And with lower emissions, it’s better for the environment. MADE TO LAST With an industry-leading warranty to give you extra assurance this product was built to last, while you enjoy your perfectly manicured lawn. STARTING MADE EASY There’s no need to struggle with a cord every time you go to work. With the Cub Cadet Lithium Powered Cordless Starter, you’ll be able to start the engine and get to work right away. THE POWER TO SHAPE YOUR YARD IS IN YOUR HANDS. Cub Cadet offers a full line of innovative handheld power equipment. Whether you’re blowing leaves or trimming bushes, you’ll have the power and precision Cub Cadet is known for in the palm of your hand. All while enjoying your time in the yard like never before. BC210 BC509 locate A DEALER AT CUBCADET.COM Innovations no one else can deliver. An experience no one else can match. Prove it to yourself with a test drive.

The limited warranty set forth below is given by Cub Cadet LLC (Cub Cadet) with respect to new merchandise purchased and used in the United States, its possessions and territories. Cub Cadet warrants this product against defects in material and workmanship for a period of three (3) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship. This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water or damage because of other peril or natural disaster. Damage resulting from the installation or use of any accessory or attachment not approved by Cub Cadet for use with the product(s) covered by this manual will void your warranty as to any resulting damage. This warranty is limited to ninety (90) days from the date of original retail purchase for any Cub Cadet product that is used for rental or commercial purposes, or any other income-producing purpose. HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE THROUGH YOUR LOCAL AUTHORIZED SERVICE DEALER. To locate the dealer in your area, visit our website at www.cubcadet.com or www.cubcadet.ca, check for a listing in the Yellow Pages, call 1-877-282-8684 or 1-800-668-1238 in Canada, or write to P.O. Box 361131, Cleveland, OH 44136-0019. No product returned directly to the factory will be accepted unless prior written permission has been extended by the Customer Service Department of Cub Cadet. This limited warranty does not provide coverage in the following cases: A. Tune-ups - Spark Plugs, Carburetor Adjustments, Filters B. Wear items - Bump Knobs, Outer Spools, Cutting Line, Inner Reels, Starter Pulley, Starter Ropes, Drive Belts, Saw Chains, Guide Bars, Cultivator Tines, Blades. C. Cub Cadet does not extend any warranty for products sold or exported outside of the United States of America, its possessions and territories, except those sold through Cub Cadet’s authorized channels of export distribution. Cub Cadet reserves the right to change or improve the design of any Cub Cadet Product without assuming any obligation to modify any product previously manufactured. No implied warranty, including any implied warranty of merchantability or fitness for a particular purpose, applies after the applicable period of express written warranty above as to the parts as identified. No other express warranty or guaranty, whether written or oral, except as mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product shall bind Cub Cadet. During the period of the Warranty, the exclusive remedy is repair or replacement of the product as set forth above. (Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.) The provisions as set forth in this Warranty provide the sole and exclusive remedy arising from the sales. Cub Cadet shall not be liable for incidental or consequential loss or damages including, without limitation, expenses incurred for substitute or replacement lawn care services, for transportation or for related expenses, or for rental expenses to temporarily replace a warranted product. (Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.) In no event shall recovery of any kind be greater than the amount of the purchase price of the product sold. Alteration of the safety features of the product shall void this Warranty. You assume the risk and liability for loss, damage, or injury to you and your property and/or to others and their property arising out of the use or misuse or inability to use the product. This limited warranty shall not extend to anyone other than the original purchaser, original lessee or the person for whom it was purchased as a gift. How State Law Relates to this Warranty: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To locate your nearest service dealer, dial 1-877-282-8684 in the United States or 1-800-668-1238 in Canada. CUB CADET LLC P.O. Box 361131 Cleveland, OH 44136-0019 MANUFACTURER’S LIMITED WARRANTY FOR:

769-07448 P01 12/11 Quick Instructions to Replace Trimmer Line For replacement line, call 1-877-282-8684 or go to an authorized service dealer. For complete line installation, refer to Line Replacement section of the unit’s manual. Quick Instructions to Assemble Straight Shaft String Trimmers for complete instructions, refer to the Assembly Instructions of the unit’s manual. IMPORTANT: READ THE OPERATOR’S MANUAL THOROUGHLY AND FOLLOW THE SAFE OPERATION PRACTICES WHILE OPERATING THE UNIT. Read and understand all instruction, warning and danger labels on the unit. Remove the cap and spacer from the boom. Push the bottom add-on into the coupler. Turn the knob clockwise to tighten. Tip unit so that the back of the engine is facing up in a vertical position. Remove the oil fill plug from the crankcase and pour the entire bottle of 4-cycle oil into the oil fill hole. NOTE: Do not mix gas and oil Insert each end of the replacement line into the holes on either side of retention hook. Push the ends through until they stick out of the sides of the head. Pull the ends through making sure that the ends are of equal length and the middle of the line is centered between the insertion holes. Push the trimmer line until it lies flat against the cutting head. Make sure the two lengths of cutting line are of equal length. Place the shield onto the mount bracket. Securely screw the 2 shield screws through the holes on the mount bracket and into the shield. Make sure the screws are tightened equally so there is a balanced gap between the bracket and the shield on each side. Quick Instructions to Start Engine for complete instructions, refer to the Starting/ Stopping Instructions of the unit’s manual. Continue to squeeze throttle control and move the choke lever to Position 3. Move choke lever to Position 2. Continue squeezing the throttle control and run unit for additional 30 to 60 seconds to complete warm up. The unit may be used during this time. Pull starter rope 3 to 5 times. Making sure to keep throttle squeezed, run unit for 30-60 seconds to warm up. Choke Lever Choke Lever 3 to 5 X Fill fuel tank with fresh fuel. Press primer bulb 10x and move choke lever to Position 1. SQUEEZE and HOLD throttle control for ALL further steps. Pull the rope 5 times. Crouch in starting position. 5 X Unleaded Gasoline Choke Lever Primer Bulb DIDN’T START? Repeat the starting instructions. If the unit still fails to start, refer to the operator’s manual for additional starting and troubleshooting information. HOT RESTART If the engine is hot: Move the choke lever to Position 2, press the primer bulb 10 times, squeeze the throttle control and pull the starter rope until the unit starts. Run the unit for 2-5 minutes. The unit may be used during this time. Then move the choke lever to Position 3. Loosen the bolt on the handle just enough to move it. While holding the unit in the operating position move the D-handle to the location that provides the best grip. Tighten the bolt until the D-handle is secure. Español — Page 11 English — Page 1 Français — Page 6 Operator’s Manual NEED HELP? CALL 1–877-282-8684 IN U.S. OR 1–800–668–1238 IN CANADA SS418 4-Cycle Trimmer Electric Start Capable