Curt Group 45144 Manuals

CURTMFG.COM • NEED ASSISTANCE? • 877.287.8634 • 45144-INS-RB • PAGE 1 INSTALLATION MANUAL 45144 Product Photo Parts List Item Qty Description 1 1 Loaded ball mount assembly 2 1 Anti-rattle clamp plate 3 1 Anti-rattle hitch pin 4 1 Clip Product Registration CURT Group stands behind our products with industry-leading warranties. Provide feedback and help us to improve our products by registering your purchase at: warranty.curtgroup.com/surveys Level of Difficulty Easy Weight Capacity Gross trailer weight (GTW) 7,500 lbs. Tongue weight (TW) 750 lbs. Tools Required Torque wrench Socket Torque Specifications 1" bolt 250 ft-lbs. 1/2" anti-rattle pin 35 ft-lbs. Use above torque setting unless otherwise noted WARNING Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the trailer ball are intended to represent the capability of the product and in no way reflect the ratings or capacity of the towing system it is being used with. The consumer or operator are strongly advised to know the ratings of the various components of the towing system and never exceed the limits of the lowest rated component being used. Use of any pin other than what is provided by the manufacturer could be a serious safety hazard and will void the warranty. Ensure that the safety chains operate freely around the trailer ball system and do not become entangled in the trailer ball system. When the ball can be moved five degrees or more from a vertical position with minimal force, by hand, the product has reached the end of its useful life and must be replaced. Continued use of a worn trailer ball assembly may result in the trailer becoming separated from the vehicle. Consult CURT customer service if you have any questions. Periodically check the hex nut and ensure it is tightened to the correct torque specifications. Before every use, be sure the snap ring on the pivot pin of the trailer ball assembly is in place and properly seated. Immediately discontinue product use if the snap ring is missing on the end of the trailer ball pivot pin or if the trailer ball pin has backed partially out of the trailer ball assembly. NOTICE Before you begin installation, read all instructions thoroughly. Proper tools will improve the quality of installation and reduce the time required. Ensure the trailer ball size matches the trailer coupler. If it does not, the trailer could become uncoupled. To help prevent damage to the product or vehicle, refer to the specified torque specifications when securing hardware during the installation process. RockerBall™ should be greased prior to initial use and periodically as described in step 3.