Cyber Power CSP600WSURC2 Manuals

2.4A USB PROTECTED GROUNDED 2 1 3 5 4 CONGRATULATIONS ON YOUR PURCHASE Thank you for selecting the CyberPower CSP600WSURC2 Surge Protector. The information contained in this brochure explains the features and operation of the CSP600WSURC2/MP1028WW. Please take a few moments to read this manual. FEATURES 1. Surge Protected Indicator Illuminated when the surge protection feature is working properly. 2. Ground Indicator LED Illuminated when the Ground protection feature is working properly. 3. Six Standard Outlets 4. Pivoting Outlets Pivoting outlets for ease of use and convenience 5. USB Charging Ports* Connect and charge up to two (2) USB devices using the surge protected USB powering ports. *USB outlets cannot be used as a USB hub. This device does not transfer data. SPECIFICATIONS • Model Number: CSP600WSURC2/MP1028WW • Outlets: 6 Standard Outlets • Surge Protection: 1200 Joules • Electrical Rating: 125V/15A/1875W • USB charger rating: 5V/2.4A total • UL Clamping Voltage: UL 1449 3rd/400V (H-N, N-G), 500 (H-G) • Maximum Peak Current: 60,000A • 3 AC Lines Protected: H-N: 30,000A, H-G: 15,000A, N-G: 15,000A; (The maximum surge possible on household Wiring is 6,000 volts) • Response Time: Less than 1 nanosecond • Attenuation: Up to 32dB • EMI/RFI Filtration: 150 kHz to 100 MHz 8-Outlet Surge Protector (6 AC & 2 USB ports) CSP600WSURC2 / MP1028WW USER MANUAL CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load – now unprotected. TROUBLESHOOTING If the Grounded indicator does not light when you plug in the surge protector,move the surge protector to a different grounded three-prong AC outlet. If it still does not light, return the product to dealer for assistance. If the surge protector proves to be working properly, your outlets may not be properly grounded and should be inspected by a professional electrician. If the Grounded indicator turns off after a period of use, the surge protection has been depleted. Replace your surge protector. If the Protected indicator does not light, the surge protector’s AC line is no longer protected from surge. Replace the surge protector. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment but it will not protect against future surges and spikes. TECHNICAL SUPPORT Please contact our Tech Support department with installation, troubleshooting, or general product questions. • Phone: 1-877-297-6937 • Email: [email protected] • Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST