CyberData 011304 Manuals

Quick Reference 930945A © 2014, CyberData Corporation, ALL RIGHTS RESERVED © 2014, CyberData Corporation, ALL RIGHTS RESERVED 930945A Quick Reference Wall Mounting Options Gang Box Mounting Options Backplate Wall (Not Provided) Network Cable & Screw 121001A Accessory Kit (4 Places) on Wall Pre Drill Holes Ground Wire Cutout for Ground Wire Connection Pick One of Four Mounting Hole Mounting Screw (3x) Slot Entry Cable Closed Slots Cable Two Gang Box use four Wall Cutout or Two Gang Box Backplate accept Single Gang Box Single Gang Box use two Backplate Wall Cutout 121002B Screw Accessory Kit Mounting Screw (3x) (Not Provided) Ground Wire Any Available Mounting Hole Ground Wire Connect to (Not Provided) Network Cable Slot Entry Cable Closed Slots Cable Getting Started • Download the Operations Guide PDF file from the following web page: http://www.cyberdata.net/products/voip/digitalanalog/singlewireemergencyintercom/docs.html • Create a plan for the locations of your Intercoms. • WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant. • WARNING: This enclosure is not rated for any AC voltages! Parts Contacting CyberData Parameter Factory Default Setting IP Addressing DHCP IP Addressa a. Default if there is not a DHCP server present. 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 (4) Plastic Ribbed Anchor (4) #6-32 FlatHead Countersunk Machine Screw (1) Wall Mounting Kit (1) Intercom Assembly (1) Gang Box Mounting Kit (4) Sheet Metal Screw The IP Endpoint Company Installation Quick Reference Singlewire-enabled VoIP Emergency Intercom 011304 VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Quick Reference 930945C © 2017, CyberData Corporation, ALL RIGHTS RESERVED © 2017, CyberData Corporation, ALL RIGHTS RESERVED 930945C Quick Reference Wall Mounting Options Gang Box Mounting Options Mounting Screw & Wall Cutout on Wall Pre Drill Holes to J1 Cable Network Backplate Plastic Ribbed Anchor Remove Screw & Nut Before Installation Mounting Screw (3x) Loop Wire Clockwise Wire Ground Wire Ground Closed Slots Slots Opening Slot Entry Cable Wall Cutout or Two Gang Box Backplate accept Single Gang Box Backplate Wall Cutout Wire Ground Two Gang Box use four Single Gang Box use two Screw Accessory Kit In Two Gang Box Mounting Move Ground Cable to Center Hole Remove Screw & Nut Before Install to Gang Box Mounting Screw (3x) Loop Wire Clockwise Wire Ground Cable Network Closed Slots Cable Slot Entry Cable Getting Started • Download the Operations Guide PDF file, from the Downloads tab at the following webpage: http://www.cyberdata.net/voip/011304/ • Create a plan for the locations of your Intercoms. • WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant. • WARNING: This enclosure is not rated for any AC voltages! Parts Contacting CyberData Parameter Factory Default Setting IP Addressing DHCP IP Addressa a. Default if there is not a DHCP server present. 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 (4) Plastic Ribbed Anchor (4) #6-32 FlatHead Countersunk Machine Screw (1) Wall Mounting Kit (1) Intercom Assembly (1) Gang Box Mounting Kit (4) Sheet Metal Screw Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Support Website: http://support.cyberdata.net/ RMA Department: (831) 373-2601 ext. 136 RMA Email: [email protected] RMA Status: http://support.cyberdata.net/ Warranty Information: http://support.cyberdata.net/ Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 http://www.cyberdata.net/ The IP Endpoint Company Installation Quick Reference Singlewire InformaCast Emergency Intercom 011304

Quick Start Guide 931623C 1.0 Out-of-Box and Prior to Final Installation 1.1. Verify that you have received all of the parts listed on the Installation Quick Reference placemat. 1.2. Download the current manual, otherwise known as an Operations Guide, which is available in the Downloads tab at the following webpage: http://www.cyberdata.net/products/011304/ Note You can also navigate to the Downloads tab by going to www.CyberData.net and following the steps that are indicated by the following figures: 2.0 Select Power Source PoE Switch PoE Injector Set PoE power type to Class 0 = 15.4W CAT6 cable recommended— for longer distances Be sure you are using a non-PoE switch or port Make sure port is not in trunk mode Set port to full duplex/ 100Mbps 011304 INFORMACAST ENABLED EMERGENCY INTERCOM 1 3 2 OUR PRODUCTS VOIP PRODUCTS A B Downloads INFORMACAST ENABLED C InformaCast Enabled Emergency Intercom Quick Start Guide The IP Endpoint Company all-guide s.com