CyberData VoIP Desktop Intercom Manuals

VoIP Desktop Intercom Features  PoE 802.3af enabled (Powered-over-Ethernet)  SIP support  Dual-speed Ethernet 10/100 Mbps  Push-to-talk option  Adaptive full-duplex voice operation  Network web management  Network adjustable speaker volume  Network adjustable mic sensitivity  Network downloadable firmware  Doubles as a paging speaker  Tamper-proof design  Activity LED  Wall-mount option  Cable cover The CyberData SIP-enabled VoIP Intercom is a desktop version of our VoIP Intercom. The intercom is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261. Ethernet I/F 10/100 Mbps Dimensions 2 years limited Warranty 010xxx Part Number VoIP Desktop Intercom Specifications Power Input PoE 802.3af compliant or +5 volts at 1000mA Regulatory Compliance FCC Class A, UL 60950 Protocol SIP RFC 3261 Compatible G711, A-law and µ-law Payload Types Typical Applications  Dedicated use phone  Door entry phone  Emergency phone  Mass notification 930239A/080908 CyberData Corporation  2555 Garden Road  Monterey, California 93940 (831) 373-2601  (831) 373-4193  www.cyberdata.net CyberData Corporation CyberData Corporation 1.9” x 4.25” x 5.33” (H x W x D)

The IP Endpoint Company Installation Quick Reference VoIP Intercom SiP Compliant 010935 Quick Reference 930180P © 2011, CyberData Corporation, ALL RIGHTS RESERVED © 2011, CyberData Corporation, ALL RIGHTS RESERVED 930180P Quick Reference Mounting To mount the intercom, use methods compliant with local electrical codes. Contacting CyberData Security Torx Screw (4x) Face Plate and PCB Assembly 2 Gang Box (1) Tamper-resistant Torx Bit (T-15H) (Requires 1/4-inch Driver Torx Bit Socket) (Not Provided) Mounting Screw Flat Head Phillips Machine Screw (2x) Plate (2x) Flush Mounting 1 2" Conduit Not to Exceed 0.1" OR CONDUIT HOLE PLUG Apply good quality waterproof sealant to all threads. HOLE PLUG CONDUIT (1/2”) OR The Intercom has three cable entries. If you are using the center entry, refer to this drawing that shows the entry restrictions. Caution Equipment Hazard: Do not use an electric or power screwdriver to fasten the face plate and PCB assembly to the gang box. To prevent over-torque damage to the gasket, do not apply more than 10 inch-pounds force. Over-torquing will cause the gasket to tear, risk moisture intrusion, and effectively void the manufacturer's warranty. GENERAL ALERT Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Web: http://www.cyberdata.net/support/contactsupportvoip.html RMA Dept: (831) 373-2601 ext. 136 Email: [email protected] RMA Status: http://www.cyberdata.net/support/rmastatus.html Warranty and RMA information is available at the following website: http://www.cyberdata.net/support/warranty/index.html Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 www.CyberData.net Typical Intercom System Installation Getting Started • Download the VoIP Intercom Operations Guide PDF file, from the VoIP Intercom product page at: http://www.cyberdata.net/products/voip/digitalanalog/intercom/docs.html • Create a plan for the locations of your Intercoms. • Prior to installation, consult local building and electrical code requirements. • WARNING: This enclosure is not rated for any AC voltages! Intercom Parts Parameter Factory Default Setting IP Addressing DHCP IP Addressa 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 a. Default if there is not a DHCP server present. 802.3af Compliant Ethernet Hub VoIP Intercom IP Phone IP PBX Server 1 2 3 4 5 6 VoIP Intercom VoIP Intercom (1) Intercom Assembly (2) 8-32 x 1/4" Flat head phillips machine screw (1) 10-24 x 5/16" Pan head phillips machine screw (1) Wall Mounting Kit (2) Outlet box plugs (2) Flush mounting plate (1) Tamper-resistant Torx Bit (T-15H) (4) #6-32 x 5/8-inch Torx Security Flat Head 82° Countersunk Machine Screw