Cypress PSoC CY8CPROTO-063-BLE Manuals

© 2018 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. 002-24937 Rev.** 1. Install the CySmart™ app on your iOS or Android device from App Store or Google Play™ store respectively. 2. Connect the USB connector (J8) to your PC using the provided USB cable. 3. The BLE module on the stamp board will advertise for 180 seconds. The green LED (LED4) blinks during this period to indicate the BLE advertising state. Pinout Description PSoC 6 KitProg2 4. Connect to the ‘Find Me Target’ device in the CySmart App and navigate to the ‘Find Me’ service. Green LED (LED4) will turn off when a BLE device is connected. The red LED (LED3) state is linked to the type of alert sent. No Alert : LED3 OFF / Mild Alert: LED3 Blinking / High Alert: LED3 ON J7 P0_1 P0_2 P3_6 P3_5 P3_4 P3_0 GND P12_6/UART_TX P12_7/UART_RX P12_1/I2C_SDA P12_0/I2C_SCL P12_5 GND P5LP_VDD J6 J8 J4 GND VIN SDA/P6_5 SCL/P6_4 TX/P5_1 RX/P5_0 P5_2 P5_3 P5_4 P5_5 P5_6 P10_0 P10_1 P10_2 P10_3 P10_4 P10_5 P10_6 VREF GND VBACKUP J5 J2 J1 GND P6.VDD P9_0 P9_1 P9_2 P9_3 P9_4 P9_5 P9_6 P6_2 P6_3/LED3 P7_1/LED4 P7_2 P7_7/CMOD P0_4/SW2 P0_5 P12_6 P12_7 RST/SW1 GND P6.VDD CY8CPROTO-063-BLE PSOC® 6 BLE PROTOTYPING KIT QUICK START GUIDE For more information, please visit: www.cypress.com/cy8cproto-063-ble

CY8CPROTO-063-BLE PSoC® 6 BLE Prototyping Board Guide Doc. # 002-24993 Rev. ** Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 www.cypress.com