D-Link DSL-2750B Manuals

D-Link Technical Support – How to configure MAC Filtering. Page 1 of 4 MAC Filtering This document will detail how to configure MAC Filtering on the following models DSL-2730B Revision T1 Firmware AU_2.00 DSL-2740B Revision F1 Firmware AU_2.00 DSL-2750B Revision B1 Firmware AU_2.00

D-Link Technical Support – How to configure Web Filtering. Page 1 of 4 Web Filtering This document will detail how to configure Web Filtering on the following models DSL-2730B Revision T1 Firmware AU_2.00 DSL-2740B Revision F1 Firmware AU_2.00 DSL-2750B Revision B1 Firmware AU_2.00 NOTE: The Web Filter feature cannot be configured to block websites to specific computers. All computers on the network will be affected by the filter.

D-Link Technical Support – How to use the Setup Disc. Page 1 of 10 Installation Guide using CD ROM for DSL modem routers DSL-2740B (Rev F1) and DSL-2750B (Rev B1) This document details how to configure the DSL-2740B and DSL-2750B using the supplied Setup Disc.

Ph: 1300 650 679 www.livingnetworks.net.au Modem Router Connection DLINK DSL-2750B (wifi). Hardware  overview Installation: YOUR  Router  is  preconfigured,  and  simply  needs  to  be  plugged  in! 1. Unbox  and  plug  in  via  the  Ethernet  cable  to  your  pc. This  is  the  Yellow  cable  in  the  box  with  the  router. NOTE:  If  we  have  already configured  your  modem,  you  can use  wifi  to  connect  to  the  modem. You  will  find  the  wifi  network  name and  SSID  (Password)  on  the  bottom of  the  device.  If  you  do  not  know the  wifi  name  and  password, contact  our  service  desk  for assistance.

ADSL Modem Installation Guide Make sure that the following are included on the package:  Wireless Modem  Ethernet/Internet Cable (colour yellow)  DSL Cable ( colour grey)  Power Adaptor (colour black)  Filter/Splitter – ( small black box with tail like phone cord at the end) (Please refer to page 6 for the illustration of the ADSL Modem and ADSL Filter Connection): 1. Connect the splitter/filter on your main phone wall outlet. 2. Connect your Phone cord on the Phone port located on the splitter. 3. Connect the grey wire into the DSL port at the back of your modem and the other end of the grey cable to the ADSL port located on the splitter/filter. 4. Connect the yellow cable (Internet Cable) on the LAN port 1 at the back of your modem and the other end of the cable to the LAN port of your PC/Laptop. 5. Connect the power adaptor on the modem and plug it on a power source. 6. Press the On and Off button at the back of your modem to turn your modem on. 7. Turn on your computer and open up a browser (ex. Internet Explorer, Mozilla Firefox, Google Chrome) 8. On the address bar, type in 192.168.1.1 and hit enter. 9. It will prompt for a Username and Password. Use the following: Username: admin Password: admin then, click login. 10. On the DLink page, click the “Setup Wizard” button.

Wireless N 300 ADSL2+ Modem Router + USB DSL-2750B QUICK INSTALLATION GUIDE

Wireless N300 ADsl2+ MoDeM router Dsl-2750B QUICK INSTALLATION GUIDE INSTALLATIONSANLEITUNG GUIDE D’INSTALLATION GUÍA DE INSTALACIÓN GUIDA DI INSTALLAZIONE INSTALLATIEHANDLEIDING INSTRUKCJA INSTALACJI INSTALAČNÍ PŘÍRUČKA TELEPÍTÉSI SEGÉDLET INSTALLASJONSVEILEDNING INSTALLATIONSVEJLEDNING ASENNUSOPAS INSTALLATIONSGUIDE GUIA DE INSTALAÇÃO ΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΓΚΑΤΑΣΤΑΣΗΣ VODIČ ZA BRZU INSTALACIJU KRATKA NAVODILA ZA UPORABO GHID DE INSTALARE RAPIDĂ all-guides. com

WIRELESS N300 ADSL2+ MODEM ROUTER + USB DSL-2750B QUICK SETUP GUIDE * PPPoE * PPPoA * BRIDGE MODE * ETHERNET WAN MANUAL INSTALLATION, WEB INTERFACE ONLY

Support – call 1300 850 462 D-Link DSL-2750b set up guide for NBN 1. Locate the NBN Network Termination Device inside your home/business. 2. At the bottom of the Network Termination Device plug an Ethernet cable into UNI-D Port 1. Please note: If you already have an NBN delivered using UNI-D port 1, our NBN service will be delivered in the next UNI-D port.

Table of Content D-Link DSL-2750B User Manual 1