D-Link GO-SW-5E Manuals

GO-SW-5E & GO-SW-8E • Five or Eight 10/100 Mbps Ports • Up to 100Mbps of Dedicated Bandwidth per Port and up to 200Mbps Bandwidth in Full-Duplex mode • Compatible with All Popular Operating Systems • Plug & Play Installation • Conserves energy with D-Link Green Technology • Supports MAC address learning Product Highlights Think Green The GO-SW-5E/GO-SW-8E 5-Port and 8-Port 10/100 Desktop Switch is part of D-Link’s new series of SOHO devices that make use of D-Link’s Green Technology, providing energy savings, reduced heat, and a longer product life without sacrificing performance or functionality. An energy-efficient power adapter (EnergyStar Level V qualified), minimized use of harmful substances (RoHS compliant), and recyclable packaging make this switch truly environmentally friendly. Conserves Energy The GO-SW-5E/GO-SW-8E 5-Port and 8-Port 10/100 Desktop Switch helps you conserve energy automatically. The switch saves substantial amounts of power by cutting power usage for unused ports or ports connected to computers that have been shut down. • Economical yet innovative fanless design runs cool and quiet • 10/100 ports allow you to connect all your devices for fast file transfers and smooth media streaming • EEE compliance reduces energy consumption without sacriaficing performcance 5/8 Port 10/100 Desktop Switch

GO-SW-5E 5-PORT FAST ETHERNET EASY DESKTOP SWITCH Manual RECYCLABLE V1.01

Quick Installation Guide 5/8-Port Fast Ethernet Switch GO-SW-5E/8E 1 Connecting the power adapter Plug the power adapter into a free wall socket, then plug the other end of the power adapter cable into the power port of the GO-SW-5E/8E. The power LED will light up, confirming that the device is powered up successfully. Using the 10/100/ Mbps Fast Ethernet ports Use one of the 5 ports on the GO-SW-5E/ or 8 ports on the GO-SW-8E to hook up your network devices with a LAN cable. Using the LED indicators Power Indicator This green indicator light is on when the Switch is receiving power; otherwise, it is off. Link/Act This LED indicator light is green when the port is connected to a device. The green indicator blinks as data is transmitted or received. 2 3 PrODUCt SEtUP 1 Conexión del ADAPtADOr de alimentación Enchufe el adaptador de alimentación en una toma de pared libre y, a continuación, enchufe el otro extremo del cable del adaptador de alimentación en el puerto de alimentación del GO-SW-5E/8E. El LED de alimentación se iluminará, confirmando que el dispositivo se ha encendido correctamente. Utilización de los puertos Fast Ethernet de 10/100 mbps Utilice uno de los 5 puertos del GO- SW-5E o de los 8 puertos del GO- SW-8E para conectar los dispositivos de red con un cable de LAN. Utilización de los indicadores LED Indicador de alimentación Esta luz verde del indicador está encendida cuando el conmutador recibe alimentación; en caso contrario, está apagada. Enlace/Act La luz de este indicador LED es verde cuando el puerto está conectado a un dispositivo. El indicador verde parpadea mientras se transmiten o reciben los datos. 2 3 CONFIGUrACIÓN DEL PrODUCtO 1 Stromanschluss Schließen Sie das Steckernetzteil an eine Steckdose an und stecken Sie das andere Kabelende des Netzteils in den Stromeingangs- Port des GO-SW-5E/8E. Die LED-Betriebsanzeige (oder Stromanzeige) leuchtet auf. Das zeigt, dass das Geräts erfolgreich eingeschaltet ist. Die 10/100 Mbit/s Fast Ethernet Ports Verwenden Sie einen der 5 Ports des GO-SW-5E oder der 8 Ports des GO-SW-8E, um Ihre Netzwerkgeräte mithilfe eines Netzwerkkabels anzuschließen. Die LED-Anzeigen Die Betriebsanzeige Diese Anzeige leuchtet grün, wenn der Switch mit Strom versorgt wird. Sonst leuchtet sie nicht. Link/Act Diese LED-Anzeige leuchtet grün, wenn der Port mit einem Gerät verbunden ist. Die LED-Anzeige blinkt, sobald Daten übertragen oder empfangen werden. 2 3 EINrICHtUNG DES PrODUKtS 1 Branchement de l’adaptateur secteur. Branchez une extrémité de l’adaptateur secteur dans une prise murale libre et l’autre extrémité dans le port d’alimentation du GO- SW-5E/8E. Le voyant d’alimentation s’allume pour confirmer que le périphérique a été correctement mis sous tension. Utilisation des ports Ethernet Fast 10/100 Mbits/s Utilisez l’un des 5 ports du GO-SW- 5E ou des 8 ports du GO-SW-8E pour raccorder vos périphériques en réseau avec un câble de réseau local. Utilisation des voyants Voyant d’alimentation Ce voyant vert s’allume lorsque l’interrupteur reçoit du courant. Sinon il reste éteint. Liaison/Activité Ce voyant s'allume en vert lorsque le port est connecté à un périphérique. Le voyant vert clignote lorsque des données sont transmises ou reçues. 2 3 INStALLAtION DU PrODUIt Pour obtenir le manuel de produits complet, allez sur la page Web www.dlink.com Para obtener el manual del producto completo, consulte el sitio web www.dlink.com For full product manual, please refer to the website www.dlink.com 1 Podłączanie zasilacza Wetknąć zasilacz w wolne gniazdo elektryczne na ścianie, następnie drugi koniec kabla zasilacza podłączyć do gniazda zasilania rozdzielacza (switcha) GO-SW- 5E/8E. Dioda LED zasilania zaświeci się, potwierdzając, że urządzenie jest skutecznie zasilane. Używanie Fastowych portów Ethernet (10/100 Mbps) Aby podłączyć swoje urządzenie sieciowe za pomocą kabla sieci LAN, należy wykorzystać jeden z 5 portów w urządzeniu GO-SW-5E, lub jeden z 8 portów w urządzeniu GO-SW-8E. Używanie wskaźników LED Wskaźnik zasilania Zielony wskaźnik zasilania świeci się, gdy rozdzielacz (switch) jest zasilany, jeśli nie jest, nie świeci się. Link/Act Ten wskaźnik zasilania jest zielony, gdy port jest podłączony do urządzenia. Zielony wskaźnik miga podczas wysyłania lub odbierania danych. 2 3 INStALACjA PrODUKtU Aby uzyskać kompletny podręcznik użytkownika, proszę udać się na stronę www.dlink.com Sie finden ein umfassendes Handbuch zum Produkt auf der Website www.dlink.com 1 Collegamento dell’alimentatore Collegare un’estremità del cavo dell’alimentatore a una presa a muro libera, quindi collegare l’altra estremità alla porta di alimentazione dello switch GO-SW-5E/8E. Il LED di alimentazione si accenderà a confermare che il dispositivo è correttamente alimentato. Utilizzo delle porte Fast Ethernet 10/100 Mbps Utilizzare una delle cinque porte disponibili sul modello GO-SW-5E o delle otto porte disponibili sul modello GO-SW-8E per collegare i dispositivi di rete con un cavo LAN. Utilizzo degli indicatori LED Indicatore di alimentazione Questa spia verde è accesa quando lo switch è alimentato; in caso contrario, è spenta. Link/Act Questo indicatore LED è di colore verde quando alla porta è collegato un dispositivo e lampeggia durante la trasmissione o la ricezione di dati. 2 3 CONFIGUrAZIONE DEL PrODOttO Per il manuale completo del prodotto, visitare il sito Web www.dlink.com LED Router Internet LED Router Internet LED Router Internet LED Router Internet LED Router Internet LED Router Internet

QUICK INSTALLATION GUIDE 5/8 PORT DESKTOP UNMANAGED SWITCH GO-SW-5E/8E INSTALLATIONSANLEITUNG GUIDE D’INSTALLATION GUÍA DE INSTALACIÓN GUIDA DI INSTALLAZIONE INSTRUKCJA INSTALACJI INSTALAČNÍ PŘÍRUČKA TELEPÍTÉSI SEGÉDLET

GO-SW-5E/8E ENGLISH Quick Install Guide 5/8-Port Fast Ethernet Switch Thank you for purchasing the GO-SW-5E/GO-SW-8E Fast Ethernet Switch. Follow the easy steps in this guide to properly set up your switch. Please verify that all the package contents listed below are available. Package Contents If any of the above items are missing, please contact your reseller. Network Before You Begin • Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. • Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate ventilation around it. • Do not place heavy objects on the switch. • Place the Switch in a cool and dry environment. Technical Support Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website. United States Internet: http://support.dlink.com Canada Internet: http://support.dlink.ca Copyright ©2013 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details. Version 5.0 | May 7, 2013 What This Product Does Expand your home or office network with the D-Link Go™ 5/8-Port Fast Ethernet Switch. This Switch lets you network up to five or eight devices at speeds up to 200Mbps (at full duplex) and is compact enough to be placed virtually anywhere in your home or office. Add a computer, printer, NAS storage device, or network camera and expand the functionality of your network. You may also connect this switch to other switches and routers to expand your network. GO-SW-5E/GO-SW-8E Fast Ethernet Switch Power Adapter Quick Install Guide D-Link Green Technology implements special power-saving features while using gigabit speeds that detect cable length and link status, and will adjust power usage accordingly. Green Technology saves energy in two specific ways: 1. If there is no link on a port (when there is no connection or the device connected is turned off) the port(s) will enter a “sleep mode” which will drastically reduce the amount of power used. 2. D-Link Green Technology detects the length of connected Ethernet cable and adjusts power usage accordingly without affecting performance. This way, a port connected to a 20m or under cable only uses as much power as it needs, instead of using full power, which is only needed for 100m cables. This product is IEEE 802.3az Energy Efficiency Ethernet compliant. The IEEE 802.3az EEE standard defines mechanisms and protocols intended to reduce the energy consumption of network links during periods of low utilization, by transitioning interfaces into a low-power state without interrupting the network connection. Both connected devices must support 802.3az EEE for power saving support. If the connected device does not support 802.3az EEE, the switch will default to D-Link’s Green Technology of power saving. D-Link Green Technology Power Indicator - This green indicator light is on when the Switch is receiving power; otherwise, it is off. Link/Act - This LED indicator light is green when the port is successfully connected to an Ethernet device and will blink as data is transmitted or received. LEDs Connecting the Switch Step 1 Plug the supplied power adapter into the Switch and the other end into a power outlet, power strip, or surge protector (recommended). Verify the Power indicator is lit on the Switch. Step 2 Connect one end of an Ethernet cable in the device you want to connect to the Switch and the other end into one of the Ethernet ports on the Switch. Check the Link lights (LEDs) on both the Switch and the device to verify that the cable is good and that there is a valid connection. 1 2 3 4 8 5 6 7 GO-SW-8GE 5V - - - 3A 1 2 LAN 3 4 INTERNET USB RESET INTERNET Switch