Danfoss ADAP-KOOL AKD 102 Manuals

2 pdf manual(s) Danfoss ADAP-KOOL AKD 102 for free download (Document Types: Operating instructions manual)

Danfoss ADAP-KOOL AKD 102 Operating instructions manual [PDF] (143 pages)

  • Identifier: id-1233772
  • Brand: Danfoss
  • Device: ADAP-KOOL AKD 102 Controller
  • Type: PDF
  • Key Aspects: Common Issue Diagnostic Flows, Risk Mitigation and Accident Prevention, Step-by-Step Assembly Procedures
  • UPD Date: 16.03.2026
  • Source File: 924499.pdf
  • Pages: 143
  • Description: Operation guide for the Danfoss ADAP-KOOL AKD 102.
Pages Preview:
  • Connection Examples 46 Start/Stop 46 Pulse Start/Stop 46 Electrical Installation - additional 48 Electrical Installation, Control Cables 48 Switches S201, S202, and S801 50 Final Set-up and Test 51 Additional Connections 53 Mechanical Brake Control 53 Motor Thermal Protection 53 5 How to Operate the Frequency Converter 55 How to operate graphical LCP (GLCP) 55 Tips and tricks 62 6 How to Programme the Frequency Converter 65 How to Programme 65 Parameter li
  • 8 Troubleshooting 133 Alarms and warnings 133 Warning/Alarm list 136 Index 139 ADAP-KOOL® Drive AKD 102 High Power Contents MG.11.O1.02 - ADAP-KOOL® is a registered Danfoss trademark 3
  • 1 How to Read these Operating Instructions ADAP-KOOL® Drive AKD 102 High Power 4 MG.11.O1.02 - ADAP-KOOL® is a registered Danfoss trademark 1
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Contents 1 How to Read these Operating Instructions 5 Copyright, limitation of liability and revision rights 5 2 Safety 7 High voltage warning 7 Safety Instructions 7 General Warning 7 Before commencing repair work 8 Special conditions 8 Avoid unintended start 9 Safe Stop of the frequency converter 9 IT mains 11 3 Mechanical Installation 13 How to Get Started 13 Pre-installation 13 Planning the Installation Site 13 Receiving the Frequency Converter 14 Transportation and Unpacking 14 Lifting 15 Mechanical Dimensions 16 Rated Power 18 Mechanical Installation 19 Terminal Locations - Frame size D 21 Cooling and Airflow 23 Field Installation of Options 28 Installation of Duct Cooling Kit in Rittal Enclosures 28 Outside Installation/ NEMA 3R Kit for Rittal Enclosures 29 Installation on Pedestal 30 Installation of Input Plate Options 30 Installation of Mains Shield for Frequency Converters 31 4 Electrical Installation 33 Electrical Installation 33 Power Connections 33 Mains Connection 40 Fuses 41 Motor Insulation 42 Motor Bearing Currents 42 Control Cable Routing 43 Electrical Installation, Control Terminals 44 ADAP-KOOL® Drive AKD 102 High Power Contents MG.11.O1.02 - ADAP-KOOL® is a registered Danfoss trademark 1

Danfoss ADAP-KOOL AKD 102 Operating instructions manual [PDF] (130 pages)

  • Identifier: id-1537879
  • Brand: Danfoss
  • Device: ADAP-KOOL AKD 102 DC Drives
  • Type: PDF
  • Key Aspects: Warranty and Service Information, Basic Configuration Guidelines, Additional Modules and Accessories Guide
  • UPD Date: 01.09.2026
  • Source File: 1463397.pdf
  • Pages: 130
  • Description: Essential instructions for the Danfoss ADAP-KOOL AKD 102.
Pages Preview:
  • 7.2.8 8-** Communication and Options 91 7.2.9 11-** ADAP-KOOL LON 92 7.2.10 13-** Smart Logic Controller 93 7.2.11 14-** Special Functions 94 7.2.12 15-** FC Information 95 7.2.13 16-** Data Readouts 97 7.2.14 18-** Info & Readouts 99 7.2.15 20-** FC Closed Loop 100 7.2.16 21-** Ext. Closed Loop 101 7.2.17 22-** Application Functions 103 7.2.18 23-** Time Based Funtions 105 7.2.19 25-** Pack Controller 106 7.2.20 26-** Analog I / O Option MCB 109 107 7.2.2
  • 1 Introduction 1.1 Introduction The AKD 102 ADAP-KOOL Drive from Danfoss Food Retail has been designed with our refrigeration customers clearly in mind. The drive is designed to make commissioning and installation a simple and easy task. The built in “wizard” set up menu guides the installer through the set up of the drive in a clear and structured manner, and has been constructed with reference to the industries refrigeration engineers, to ensure that
  • 1.1.2 Copyright, Limitation of Liability and Revision Rights This publication contains information proprietary to Danfoss. By accepting and using this manual the user agrees that the information contained herein will be used solely for operating equipment from Danfoss or equipment from other vendors provided that such equipment is intended for communication with Danfoss equipment over a serial communication link. This publication is protected under the Cop
  • 1.1.4 Abbreviations and Standards Abbreviations: Terms: SI-units: I-P units: a Acceleration m/s2 ft/s2 AWG American wire gauge Auto Tune Automatic Motor Tuning °C Celsius I Current A Amp ILIM Current limit Joule Energy J = N∙m ft-lb, Btu °F Fahrenheit FC Frequency Converter f Frequency Hz Hz kHz Kilohertz kHz kHz LCP Local Control Panel mA Milliampere ms Millisecond min Minute MCT Motion Control Tool M-TYPE Motor Type Dependent Nm Newton Metres in-lbs
  • 1.1.6 Type Code String � � Description Pos Possible choice Product group & VLT Series 1-6 AKD102 Power rating 8-10 1.1 - 250 kW (P1K1 - P250) Number of phases 11 Three phases (T) Mains voltage 11-12 T 2: 200-240 VAC T 4: 380-480 VAC Enclosure 13-15 E20: IP20 E21: IP 21/NEMA Type 1 E55: IP 55/NEMA Type 12 E66: IP66 P21: IP21/NEMA Type 1 w/backplate P55: IP55/NEMA Type 12 w/backplate RFI filter 16-17 H1: RFI filter class A1/B H2: RFI filter class A2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Contents 1 Introduction 3 1.1.2 Copyright, Limitation of Liability and Revision Rights 4 1.1.6 Type Code String 6 2 Safety 7 2.1.2 High Voltage Warning 7 2.1.5 Before Commencing Repair Work 8 2.1.6 Special Conditions 9 2.1.7 Safe Stop of the Frequency Converter 9 2.1.8 IT Mains 11 3 Application Guide 12 3.1.1 ADAP-KOOL® Drive Application Guide 12 3.1.2 Application Descriptions 17 4 Mechanical Installation 19 4.1 Before starting 19 4.1.2 Mechanical Dimensions 20 4.2 How to Install 23 5 Electrical Installation 25 5.1 How to Connect 25 5.1.2 Electrical Installation and Control Cables 26 5.1.5 Mains Wiring Overview 30 5.1.11 Motor Wiring Overview 36 5.1.19 How to Test Motor and Direction of Rotation 41 6 How to Operate the Frequency Converter 45 6.1.2 How to Operate the Graphical LCP (GLCP) 45 6.1.6 Tips and Tricks 52 7 How to Programme the Frequency Converter 54 7.1 How to Programme 54 7.2 Parameter list 80 7.2.1 0-** Operation and Display 81 7.2.2 1-** Load / Motor 83 7.2.3 2-** Brakes 84 7.2.4 3-** Reference / Ramps 85 7.2.5 4-** Limits / Warnings 86 7.2.6 5-** Digital In / Out 87 7.2.7 6-** Analog In / Out 89 Contents ADAP-KOOL® Drive Operating Instructions MG.11.L4.02 - ADAP-KOOL® Drive 1

Danfoss ADAP-KOOL AKD 102: Controller, DC Drives Category Related Instructions

31-396
Binks 31-396
16.04.2026 8 pages

Binks 55 GALLON GEAR DRIVEN DRUM COVER AGITATOR UNITS Stainless Steel Fitted 1 16 21 22 12 15 14 13 1 20-1237 SOC. HD. SET SCREW, 1/4-20 x 1/4" Lg ................................................ 1 2 20-1741 SQ. HD. SET SCREW, Stainless................ 2 3* 20 Maintenance and service manual for the Binks 31-396 DC Drives. The manual elaborates on features and technical overview, usage procedures, product maintenance, firmware installation.

AxisDrive Series
Hettich AxisDrive Series
01.08.2026 9 pages

AxisDrive Bedienungsanleitung/ Operating instructions/ Mode d‘emploi/ manuale d‘uso Official operating instructions for the Hettich AxisDrive Series DC Drives. This guide elaborates on device features and installation, shutdown procedures, user preferences.

MCB 115
Trane MCB 115
30.06.2026 7 pages

MCB 115 Programmable I/O Option Module Instructions May 2009 TR200 BAS-SVX34A-EN BAS-SVX34A-EN Manual for safe operation of the Trane MCB 115 I/O Systems. This manual offers stepwise instructions for technical specifications, specifications, technical guidelines, power requirements.

Automation1 XL5e
Aerotech Automation1 XL5e
10.06.2026 110 pages

Revision 1.01 Automation1 XL5e High-Performance Linear Digital Drive HARDWARE MANUAL Device guide for the Aerotech Automation1 XL5e DC Drives. This reference manual outlines configuration options, technical guidelines, operational procedures, installation procedures.