Data Modul PCM-3362 Manuals

Data Modul AG - www.data-modul.com Specification PCM-3362 iii PCM-3362 User Manual Packing List Before you begin installing your card, please make sure that the following materials have been shipped: If any of these items are missing or damaged, contact your distributor or sales repre- sentative immediately. Optional Accessory Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can find the lat- est information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: „ Product name and serial number „ Description of your peripheral attachments „ Description of your software (operating system, version, application software, etc.) „ A complete description of the problem „ The exact wording of any error messages Declaration of Conformity This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and „ 1 x PCM-3362 SBC „ 1 x SATA data cable (p/n: 1700071000) „ 1 x SATA power cable (p/n: 1703150102) „ 1 x Keyboard/Mouse cable (p/n: 1703060053) „ 1 x Y cable for KB/MS extension (p/n: 1700060202) „ 1 x Ethernet RJ-45 Conn. conversion cable (p/n: 1700017863) „ 1 x VGA cable (p/n: 1700000898) „ 1 x USB cable (bracket type with two USB ports) (p/n: 1703100260) „ 1 x RS-422/485 COM cable (p/n: 1703040157) „ 1 x RS-232 COM cable (p/n: 1701200220) „ 1 x ATX Power cable (p/n: 1700002332) „ 1 x AT Power cable (p/n: 1700003491) „ 1 x Startup manual „ 1 x CD-ROM (Manual, Driver, Utility) Model No.List Description PCM-3362N-S6A1E Intel Atom N450 PC/104-Plus SBC, VGA, LVDS, LAN, USB,SATA and on-board flash 1 x heatspreader (p/n:1960047106T001) PCM-3362 User Manual iv 2. This device must accept any interference received, including interference that may cause undesired operation FCC Class A This equipment has been tested and found to comply with the limits for a Class A dig- ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference when the equipment is oper- ated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tion manual, may cause harmful interference to radio communications. Opera- thin of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- flatterer. Discard used batteries according to the manufacturer's instruc- tions. v PCM-3362 User Manual Contents Chapter 1 General Information ............................1 1.1 Introduction ............................................................................................... 2 1.2 Features.................................................................................................... 2 1.3 Specifications............................................................................................ 2 1.3.1 Standard PC/104-plus Biscuit SBC Functions.............................. 2 1.3.2 VGA/LVDS Interface..................................................................... 3 1.3.3 Ethernet Interface ......................................................................... 3 1.3.4 OS support.................................................................................... 3 1.3.5 Mechanical and Environmental..................................................... 3 1.4 Board layout: dimensions.......................................................................... 4 Figure 1.1 Board layout: Dimensions (Component Side) ............ 4 Figure 1.2 Board layout: Dimensions (Solder Side)..................... 5 Chapter 2 Hardware Installation ..........................7 2.1 Jumpers .................................................................................................... 8 Table 2.1: Jumpers...................................................................... 8 2.2 Connectors................................................................................................ 8 Table 2.2: Connectors ................................................................. 8 2.3 Locating Connectors & block diagram ...................................................... 9 Figure 2.1 Connectors (component side) .................................... 9 Figure 2.2 Connectors (solder side) ............................................ 9 Figure 2.3 Block diagram........................................................... 10 2.4 Setting Jumpers ...................................................................................... 10 2.4.1 Clear CMOS (JP1)...................................................................... 11 Table 2.3: Clear CMOS (JP1).................................................... 11 2.4.2 LVDS Panel Power Select (JP2)................................................. 11 Table 2.4: LVDS Panel Power Select (JP2) .............................. 11 2.4.3 COM3 RS422/RS485 Select (JP3)............................................. 12 Table 2.5: COM3 RS422/RS485 Select (JP3)........................... 12 2.4.4 PCI I/O Voltage Select (JP4) ...................................................... 12 Table 2.6: PCI I/O Voltage Select (JP4).................................... 12 2.5 Installing SODIMMs ................................................................................ 12 2.6 Flash ....................................................................................................... 12 2.7 High Definition Audio Interface (CN1)..................................................... 13 2.8 VGA/LCD interface connections ............................................................. 13 2.8.1 CRT display connector (CN8)..................................................... 13 2.8.2 LVDS connector (CN6) ............................................................... 13 2.8.3 Panel Inverter Power (CN7)........................................................ 13 2.9 USB connectors (CN9 & CN10).............................................................. 13 2.10 Front Panel Connector (CN12) ............................................................... 13 2.11 Buzzer Connector (CN13)....................................................................... 14 2.12 SATA Connector (CN15)......................................................................... 14 2.13 COM port connector (CN16 & CN17)...................................................... 14 2.13.1 Serial Port RS-422/485 (CN17) .................................................. 14 2.14 Giga LAN Connector (CN18) .................................................................. 14 2.14.1 LAN LED Connector (CN19)....................................................... 14 2.15 Keyboard and PS/2 mouse connector (CN20)........................................ 14 2.16 GPIO Connector (CN21)......................................................................... 15 2.17 ATX Power in connector (CN23)............................................................. 15 2.18 Power Connectors (CN24)...................................................................... 15 2.19 I2C Bus connector (CN25)...................................................................... 15 2.20 -12 V & -5 V power connector (CN26) ................................................... 15 2.21 Watchdog timer configuration ................................................................. 15