dbx DriveRack 4800 Manuals

DriveRack® 4800 & 4820 Specifications CONTROL DATA MESSAGING SERVICES AUDIO CONTROL ASYNCHRONOUS CONTROL AUDIO SERVICES PACKET SERVICES PHYSICAL MEDIUM STREAMING AUDIO 18-0362 www.dbxpro.com INPUTS AND OUTPUTS Analog Inputs: (4) Connectors: Female XLR Type: Electronically balanced, RF filtered Impedance: >50k ohms Maximum Software selectable for: +28, +26, +24, Input Level +22, +20, +18, +16, +14 dBu CMRR: >40 dB typical, >55 dB at 1 kHz Digital Inputs: (4) AES/EBU Channels Connectors: Female XLR Type: Transformer Isolated, RF filtered Impedance: 110 ohms RTA Input: (1) Analog Connectors: Female XLR Gain range: 20 dB to 50 dB in 10 dB increments Analog Outputs: (8) Connectors: Male XLR Type: Electronically balanced, RF filtered Impedance: 30 ohms Max Output Level: Software selectable for: +24, +22, +20, +12, +8, +4 dBu Digital Outputs: (8) AES/EBU Channels Connectors: Male XLR Type: Transformer Isolated, RF filtered Impedance: 110 ohms A/D PERFORMANCE Type: dbx Type IV™ Conversion System Dynamic Range: 113 dB unweighted, 116 dB A-weighted Type IV™: 126 dB with transient material, dynamic range A-weighted, 22 kHz BW 123 dB with transient material, unweighted, 22 kHz BW 118 dB typical with program material, A-weighted, 22 kHz BW Sample Rate: 96 kHz or 48 kHz A/D Wordlength: 24 bits D/A PERFORMANCE Dynamic Range: 112 dB unweighted, 115 dB A-weighted Sample Rate: 96 kHz or 48 kHz D/A Wordlength: 24 bits SYSTEM PERFORMANCE Dynamic Range: 110 dB unweighted, 113 dB A-weighted Internal Processing: 32 bit floating point THD + Noise: 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain Frequency 20 Hz- 20 kHz, ±0.25 dB, <10 Response: Hz- 50 kHz +0/-3dB @ 96kHz Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain PROCESSING Pre EQ Type: (1) 31-band Graphic EQ on each input; (1) graphic EQ switchable between 31-band and 9-band Parametric on each input Range: ±15 dB Input Insert (2) selectable Insert Processing Processing: Blocks per input Type: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Notch filters and Advanced Feedback Suppression Input Delay: Up to 680 mSec available Routing/Mixing: 4-input mixer available at each input and output allowing any input to be sent or mixed to any output Output Insert (2) selectable Insert Processing blocks per Processing: output Type: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth X-Over Filter 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, Configurations 2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x8 Types: Bessel 6, 12, 18, 24, 36 and 48 dB/Octave Butterworth 6, 12, 18, 24, 36 & 48 dB/Octave Linkwitz-Riley 12, 24, 36, and 48 dB/Octave Polarity: Positive and Negative Phase Control: 0˚ to -180˚ in 5˚ increments Output EQ Type: (1) 6-band Parametric on each output Output Delay: 1365 mSec shared between the outputs MISCELLANEOUS: I/O Transformers: Optional Jensen JT-11 & JT-123-dbx CobraNet® I/O: Optional Control: Ethernet, RS-232, Optional dbx ZC Wall Panels Power: 100V to 240V 50/60Hz, 35 Watts Dimensions: 3.5” x 19” x 12.15” Weight: 11 lbs. (14 lbs. w/audio transformers) Shipping Weight: 12.5 lbs. (15.5 lbs. w/audio transformers) dbx Professional Products • 8760 South Sandy Parkway • Sandy UT 84070 • Phone 801.568.7660 Fax 801.568.7662 • Int’l Fax 801.568.7583 • email: [email protected] • www.dbxpro.com DriveRack 4800 front panel DriveRack 4820 front panel DriveRack 4800 and 4820 rear panel ©2005 dbx Professional, All Rights Reserved. All specifications are subject to change. dbx and HiQNet are trademarks of Harman International. All other trademarks are the properties of their respective holders. Hardware Architecture Employing industry standard networking technologies, HiQnet™ hardware is ready to be integrated into any system. By using Ethernet as its main interface, HiQnet™ assures that products will operate within existing and new infrastructures and provides all the remote access, connectivity, and control required. Software Architecture Far more than just a messaging protocol, HiQnet™ is a software architecture for real-time control and monitoring com- bined with streamed audio. The HiQnet™ architecture is truly the first to allow the system not to be tied to an underlying physical medium. Whether a simple RS232 control command or fully streamed CobraNet audio and HiQnet™ control over Ethernet, our architecture is flexible enough to handle any situation. System Applications The range of HiQnet™-compatible devices offers previously unattain- able benefits in diverse real-world systems: Live sound Commercial installation Engineered installation Broadcast Portable PA HiQnet™ compatible devices  AKG® WMS 4000 wireless microphone system BSS® Soundweb™ London networked audio distribution system Crown® I-Tech™ tour sound amplifier range Crown® amplifier PIP modules – PIP Lite, USP3, USP3/CN dbx® DriveRack® 4800 / 4820 networked loudspeaker management processors JBL® VerTec® DP Series with DrivePack™ technology intelligent networked amplified loudspeakers Studer ® Vista 8 high-end theatre / install digital console 4800/4820 DriveRack ® Family Complete Equalization and Loudspeaker Management System System Architecture

8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 Fax (801) 568-7662 Int’l Fax (801) 568-7583 [email protected] http://www.dbxpro.com A Harman International Company 18-0335-B 5/09 ® ® ® ® Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the QVGA display and multiple control surfaces, the 4800 provides all the processing, flexibility and control necessary for both installation and live use. The menu-based Wizard function enhances its capability by making the DriveRack 4800 easier to use providing a menu based setup procedure including system configuration, Auto-EQ, and an Advanced Feedback Suppression™(AFS™) Wizard. The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide “Everything you need between the mixer and the power amps”. In keep- ing with this philosophy the 4800 includes four inputs and eight outputs with both analog and dig- ital connectivity. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world's leading system pro- cessing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack provides a full color display to speed manual operation; this combined with intuitive front panel controls, an easy to use GUI and optional wall panel controllers means that whether your application is tour sound or installation, the DriveRack 4800 has what it takes. For more informa- tion please visit www.driverack.com or www.dbxpro.com. • 48 and 96 kHz operation • Color QVGA Display • 4 analog and AES/EBU inputs • 8 analog and AES/EBU outputs • Optional Jensen® I/O Transformers • Full Bandpass Filter, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters • 31-Band Graphic and 9-band Parametric EQ on every input • 6-band Parametric EQ on every output • Loudspeaker Cluster and Driver Alignment Delays • Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others • Ethernet networking control • dbx ZC wall panel control

User Manual 4800/4820 Complete Equalization & Loudspeaker Management System

User Manual 4800/4820 ® Complete Equalization & Loudspeaker Management System

8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 Fax (801) 568-7662 Int’l Fax (801) 568-7583 [email protected] http://www.dbxpro.com A Harman International Company 18-0335 -A 4/05 ® Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the QVGA display and multiple control surfaces, the 4800 provides all the processing, flexibility and control necessary for both installation and live use. The menu-based Wizard function enhances its capability by making the DriveRack 4800 easier to use providing a menu based setup procedure including system configuration, Auto-EQ, and an Advanced Feedback Suppression™(AFS™) Wizard. The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide “Everything you need between the mixer and the power amps”. In keep- ing with this philosophy the 4800 includes four inputs and eight outputs with both analog and dig- ital connectivity; a CobraNet option rounds it out offering greater flexibility for large installations. The 96 kHz processing engine is capable of offering insert processing functions to customize the pro- cessing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world's leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack pro- vides a full color display to speed manual operation; this combined with intuitive front panel con- trols, an easy to use GUI and optional wall panel controllers means that whether your application is tour sound or installation, the DriveRack 4800 has what it takes. For more information please visit www.driverack.com or www.dbxpro.com. • 48 and 96 kHz operation • Color QVGA Display • 4 analog and AES/EBU inputs • 8 analog and AES/EBU outputs • Optional CobraNet I/O • Optional Jensen® I/O Transformers • Full Bandpass Filter, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters • 31-Band Graphic and 9-band Parametric EQ on every input • 6-band Parametric EQ on every output • Loudspeaker Cluster and Driver Alignment Delays • Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others • Ethernet networking control • dbx ZC wall panel control