Delfield F5MC48D Manuals

F5 30” DEEP MIRRORED SELF-CONTAINED DROP IN REFRIGERATED DISPLAY CASES Project __________________________ Item ____________________________ Quantity _________________________ CSI Section 11400 F5 Serview Drop In 30” Deep Mirrored Self-Contained Refrigerated Display Cases F5 Serview Drop In 30” Deep Mirrored Self-Contained Refrigerated Display Cases F5 Serview Drop In 980 S. Isabella Road Mt. Pleasant, MI 48858 www.delfi eld.com Phone: 800-733-8948 Fax: 800-669-0619 Email: info@delfi eld.com Approval _________________ Date ____________________ F5MC48D SPECIFICATIONS Display section exterior sides are made of 18- gauge stainless steel. Exterior display section top to be 22-gauge galvanized metal. Interior sides are made of .095” thick ABS plastic with molded shelf supports. The interior bottom is constructed with stainless steel for long lasting durability. Display section is fully insulated with high density polyurethane foam between the interior and exte- rior. Four adjustable epoxy coated wire shelves are provided for the display section. An on/off switch for the display section light(s) is located at the right end of the front facing, above the display section doors. Display case refrigeration system consists of a full-length top mounted coil with multiple fans circulating the air throughout the cabinet utilizing a thermostatic control. An ABS plastic drip pan is placed below the coil with a clear drain hose for running the condensation to the lower base mechanical section. Front of the display section is equipped with two sliding and removable self-closing .50” thick argon fi lled, low-e glass doors with a warm edge spacer. The vertical outsides of each door tuck into an extruded channel running vertically up each side. Front nosing to be 20-gauge stainless steel. Self-contained models have a pre-wired condensing unit housed in a 16-gauge cage hanging form the units exterior bottom. Cage also is supplied with an 8’ cord and plug and electrical junction box. Electrical connec- tions are 115V-60H-1PH. Refrigeration system components are HFC-404A. Display cabinet blower coil assembly shall have a coated evaporator coil and fans. Interior refriger- ated base cabinet and display section to maintain 36 to 40 degree temperatures at 100-degree ambient room temperature. Back has 2” thick panel, constructed on 22-gauge stainless steel interior, 2” of high-density polyure- thane foam and 22-gauge galvanized steel exterior. Interior of back panel has (2) angled glass mirrors. MODELS: ❑ F5MC48D 30” Deep Self-Contained Drop In Display Section ❑ F5MC72D 30” Deep Self-Contained Drop In Display Section STANDARD FEATURES • Display exterior sides are made of 18-gauge stainless steel • ABS plastic interior sides with molded shelf supports • (4) adjustable epoxy coated wire shelves • On/off switch for the display section light(s) • Top mount coil with multiple fans circulating the air throughout the cabinet • Display section runs off a thermostatic control • Sliding and removable self-closing .50” thick argon filled, low-E, warm edge insert, thermopane glass doors with left and right vertical gasket • High density polyurethane foam throughout unit • Single service display section with mirrored back • Environmentally friendly HFC-404A refrigerant • Door locks standard OPTIONS AND ACCESSORIES ❑ 48” shelf (48” long units only) ❑ 72” shelf (72” long units only) ❑ 220 volt/50 cycle - inclusion of this option will alter specifi cations

Part Number: 9291460 6/15 F5 and F15 Series Refrigerated Display Cases Original Instructions Installation, Operation and Maintenance Manual This manual is updated as new information and models are released. Visit our website for the latest manual.