Delfield UC4472N Manuals

Effective February 2004 Compact Refrigerators & Freezers Service and Installation Manual Compact Refrigerators & Freezers Service and Installation Manual Compact Refrigerators & Freezers Please read this manual completely before attempting to install or operate this equipment! Notify carrier of damage! Inspect all components immediately. See page 2. 400 Series Work-top and undercounter refrigerator or freezer bases 4500 Series Work-top and undercounter freezer bases 4400 Series Work-top and undercounter refrigerator bases 4000 Series Undercounter refrigerator or freezer bases 4400N-M Series Mega top refrigerated front breathers 4400N Series Salad top refrigerator bases IMPORTANT INFORMATION READ BEFORE USE PLEASE SAVE THESE INSTRUCTIONS!

Part Number: 9294098 4/15 Compact Refrigerators & Freezers 4400 & 4500 Series Original Instructions Installation, Operation and Maintenance Manual This manual is updated as new information and models are released. Visit our website for the latest manual. *9294098*

Project ___________________________________ Item _____________________________________ Quantity _ ________________________________ CSI Section 11400 Approved _ _______________________________ Date _____________________________________ 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858 Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com Delfield ™ ® Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front. Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is one- piece 22-gauge stainless steel. Interior bottom and top are thermoformed ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug. Casters: Equipment is mounted on 2” (5.08cm) diameter front locking plate casters. 2.5” (6.35cm) ride height. Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm) and three 1/9 size 4"-6" deep pans. Bottom drawer holds one 12" x 20" and three 1/9 size 4" deep pans. Pans are supplied by others. Specifications Standard Features Options & Accessories All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up Durable, rugged stainless steel sides, top and front Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty Heavy duty self-closing hinges “D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly Environmentally friendly R404A refrigerant High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low Black recessed quick grip handle Standard on 2” casters for easy cleaning and installation 60-cycle single phase electrical system 7’ cord and plug supplied Cord spring relief - prevents cord rollover One epoxy coated wire shelf standard, installed per door section ACT solid state electronic control One year parts and 90 day labor standard warranty. • • • • • • • • • • • • • • • UC4472N Three section refrigerator undercounter with doors UCD4472N Three section refrigerator undercounter with drawers • • Models UC4472N Undercounter Front-Breathing Undercounter Refrigerators UC4472N Undercounter Front-Breathing Undercounter Refrigerators 18” wide single tier overshelf Stainless steel finish on back Plastic laminate on front Additional wire shelves Door lock Exterior thermometer Interior lights Glass door(s) *220V/50 Hertz electrical system *Inclusion of this option will alter electrical specifications of the unit. • • • • • • • • • UC4472N

UC4472N FRONT-BREATHING UNDERCOUNTER REFRIGERATORS Project __________________________ Item ____________________________ Quantity _________________________ CSI Section 11400 UC4472N UNDERCOUNTER Front-Breathing Undercounter Refrigerators 980 S. Isabella Road Mt. Pleasant, MI 48858 www.delfi eld.com Phone: 800-733-8948 Fax: 800-669-0619 Email: info@delfi eld.com Approval _________________ Date ____________________ MODELS: ❑ UC4472N Three section refrigerator ❑ UCD4472N Three section refrigerator Undercounter with a door Undercounter with drawers Model UC4472N SPECIFICATIONS Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front. Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is one- piece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place polyurethane. Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug. Casters: Equipment is mounted on 2” (5.08cm) diameter front locking plate casters. 2.5” (6.35cm) ride height. Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm) and three 1/6 size 4"-6" deep pans. Bottom drawer holds one 12" x 20" and three 1/6 size 4" deep pans. Pans are supplied by others. STANDARD FEATURES • All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up • Durable, rugged stainless steel sides, top and front • Features Delfi eld’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty • Heavy duty self-closing hinges • “D” prefi x models feature Delfi eld’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly • Environmentally friendly R404A refrigerant • High density foamed in place polyurethane keeps energy costs low • Black recessed quick grip handle • Standard on 2” casters for easy cleaning and installation • 60-cycle single phase electrical system • 7’ cord and plug supplied • Cord spring relief - prevents cord rollover • One epoxy coated wire shelf standard, installed per door section • ACT solid state electronic control • One year parts and 90 day labor standard warranty. OPTIONS AND ACCESSORIES ❑ Flat lift off cover ❑ 18” wide single tier overshelf ❑ Stainless steel finish on back ❑ Plastic laminate on front ❑ Additional wire shelves ❑ Door lock ❑ Exterior thermometer ❑ Interior lights ❑ Glass door(s) ❑ *220V/50 Hertz electrical system * Inclusion of this option will alter electrical specifications of the unit.