Delta MultiChoice T24859 Series Manuals

MultiChoice ® Valve Trim with Diverter Installation Instructions Owners Manual T24859, T24867, T24897, T24899, T24959, T24967, T24997 & T24999 Series Write purchased model number here. You May Need Table of Contents: Warranties...................................................................................Page 2 Installation Instructions................................................................Pages 3 - 7 Clean and care............................................................................Page 8 Maintenance................................................................................Page 8 Cartridge Summary Reference Sheet.........................................Page 9 Classic Series Replacement Parts..............................................Page 12 For additional replacement parts, visit www.deltafaucet.com CAUTION: This system/device must be set by the installer to ensure safe, maximum temperature. Any change in the setting may raise the discharge temperature above the limit considered safe and may lead to hot water burns. NOTICE TO INSTALLER: CAUTION! – As the installer of this valve, it is your responsibility to properly INSTALL and ADJUST this valve per the instructions given. This valve does not automatically adjust for inlet temperature changes, therefore, someone must make the necessary Rotational Limit Stop adjustments at the time of installation and further adjustments may be necessary due to seasonal water temperature change. YOU MUST inform the owner/user of this requirement by following the instructions. If you or the owner/user are unsure how to properly make these adjustments please refer to page 5 and if still uncertain, call us at 1-800-345-DELTA. After installation and adjustment, you must affix your name, company name and the date you adjusted the Rotational Limit Stop to the caution label provided and apply or attach the label to the back side of the closest cabinet door and the warning label to the water heater. Leave this Instruction Sheet for the owner’s/user’s reference. WARNING: This pressure balanced or thermostatic bath valve is designed to minimize the effects of outlet water temperature changes due to inlet pressure changes, commonly caused by dishwashers, washing machines, toilets and the like. It may not provide protection from hot water burns when there is a failure of other temperature controlling devices elsewhere in the plumbing system, if the rotational limit stop is not properly set or if the hot water temperature is changed after the settings are made or if the water inlet changes due to seasonal changes. WARNING: Do not install a shut-off device on either outlet of this valve. When this type of device shuts off the water flow, it can defeat the ability of the valve to balance the hot and cold water pressures. www.deltafaucet.com 03/06/2017 Rev. A 1 92344 3/32" all-guide s.com