Det-Tronics X3300 Manuals

2 pdf manual(s) Det-Tronics X3300 for free download (Document Types: Instructions manual)

Det-Tronics X3300 Instructions manual [PDF] (27 pages)

  • Identifier: id-1776577
  • Brand: Det-Tronics
  • Device: X3300 Security Sensors
  • Type: PDF
  • Key Aspects: Warranty and Service Information, Hardware Setup Instructions, Operational Mode Explanations
  • UPD Date: 04.05.2026
  • Source File: 1763698.pdf
  • Pages: 27
  • Description: Device setup guide for the Det-Tronics X3300.
Pages Preview:
  • DESCRIPTION................................................................1 GENERAL APPLICATION INFORMATION ....................2 Response Characteristics.........................................2 Important Application Considerations.......................2 INSTALLATION...............................................................2 Detector Positioning .................................................2 WIRING REQUIREMENTS.................................
  • IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. WARNING Do not open the detector assembly in a hazardous area when power is applied. The detector contains no user serviceable components and should never be opened, with the exception of the rear wiring compartment. Doing so could disturb critical optical alignment and calibration parameters, possibly causing serious damage.
  • A tricolor LED on the detector faceplate indicates normal, fire alarm, and fault conditions. Table 1 indicates the condition of the LED for each detector status. The LED is non-latching. The X3300 is available in aluminum or stainless steel and features multiple mounting options, including: • Direct to flexible conduit with the use of a Q9001L swivel mount • Direct to conduit elbow mount. GENERAL APPLICATION INFORMATION RESPONSE CHARACTERISTICS Respo
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8517 Protect•ir Multispectrum IR Flame Detector with Pulse Output X3300 Detector Electronics Corporation 6901 West 110th Street • Minneapolis, Minnesota 55438 USA Tel: 952.941.5665 or 800.765.3473 • Fax: 952.829.8750 12/00 95-8517

Det-Tronics X3300 Instructions manual [PDF] (21 pages)

  • Identifier: id-658502
  • Brand: Det-Tronics
  • Device: X3300 Smoke Alarm
  • Type: PDF
  • Key Aspects: Best Practices for Everyday Use, Performance Optimization Tips, Warranty and Service Information
  • UPD Date: 15.07.2026
  • Source File: 654533.pdf
  • Pages: 21
  • Description: Official user handbook for the Det-Tronics X3300.
Pages Preview:
  • IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. WARNING Do not open the detector assembly in a hazardous area when power is applied. The detector contains no user serviceable components and should never be opened. Doing so could disturb critical optical alignment and calibration parameters, possibly causing serious damage. This type of damage could be undetected and could
  • Factory configurable options include: • Automatic or Manual Optical Integrity (oi) • Fire and Fault Relay Operation – Normally Open (N.O.) or Normally Closed (N.C.) Contacts – Normally Energized or Normally De-Energized (Fire relay) – Latching or Non-latching. • 4 to 20 mA output. Table 2—Factory Configuration Options (Not Changeable in the Field) Option Available Configurations Sensitivity • Detects 1 square foot gasoline fire at 210 feet
  • Refer to the “Ordering Information“ section for a complete list of available options and accessories. Table 1 indicates the condition of the LED for each detector status. The LED is non-latching. Fire and Fault relay condition for each detector status varies according to the factory configuration. FACTORY CONFIGURATION OPTIONS The X3300 is configured at the factory to operate as specified when ordered. Refer to the descriptions in Table 2 for a func
  • INSTALLATION DETECTOR POSITIONING Detectors should be positioned to provide the best unobstructed view of the area to be protected. The following factors should also be taken into consideration: • Identify all high risk fire ignition sources. • Be sure that enough detectors are used to adequately cover the hazardous area. • Locate and position the detector so that the fire hazard(s) are within both the field of view and detection range of the device
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8502 Protect•ir Multispectrum IR Flame Detector X3300 Detector Electronics Corporation 6901 West 110th Street • Minneapolis, Minnesota 55438 USA Tel: 952.941.5665 or 800.765.3473 • Fax: 952.829.8750 9/00 95-8502

Det-Tronics X3300: Security Sensors, Smoke Alarm Category Related Instructions

I12040
Kidde I12040
22.08.2026 2 pages

120V AC/DC Wire-in Smoke Alarm Battery Backup Part Number 21006378 Model i12040 Description The Kidde i12040 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Owner’s manual for the Kidde I12040 Smoke Alarm. The document explains user settings, maintenance guidelines, assembly reference, troubleshooting guides.

700 Series
ESL 700 Series
16.05.2026 6 pages

© 2014 UTC Fire & Security Americas Corporation, Inc. 1 / 6 P/N 13083-EN • REV J • ISS 10APR14 ESL 700 Series Conventional Smoke and Heat Detector Installation Sheet Description The ESL 700 Series smoke or smoke with rate-of-rise heat detectors have field Complete instruction guide for the ESL 700 Series Smoke Alarm. It offers guidance for setup and compatibility information, device safety checks, installation guides.

PI 9000
Kidde PI 9000
15.06.2026 2 pages

9 Volt Battery Operated Photo Electric/ Ionization Smoke Alarm with “HUSH” Control to temporarily silence nuisance alarms, and alarm memory. Thank you for purchasing this smoke alarm. It is an important part of your family’s home safety plan. You can t User reference manual for the Kidde PI 9000 Smoke Alarm. It describes step-by-step product maintenance, component overview, application scenarios, user settings.

Smoke and Carbon Monoxide Alarm SC01N
BRK electronic Smoke and Carbon Monoxide Alarm SC01N
29.04.2026 1 pages

Device guide for the BRK electronic Smoke and Carbon Monoxide Alarm SC01N Smoke Alarm. This reference manual outlines firmware updates, product safety, connectivity setup, wiring diagrams.