Det-Tronics X3302 Manuals

5 pdf manual(s) Det-Tronics X3302 for free download (Document Types: Instructions manual, Addendum)

Det-Tronics X3302 Instructions manual [PDF] (24 pages)

  • Identifier: id-1867873
  • Brand: Det-Tronics
  • Device: X3302 Security Sensors
  • Type: PDF
  • Key Aspects: System Connectivity and Wiring Basics, Standard Operating Procedures, Performance Optimization Tips
  • UPD Date: 23.08.2026
  • Source File: 1854889.pdf
  • Pages: 24
  • Description: Setup instructions for the Det-Tronics X3302.
Pages Preview:
  • Table Of Contents DESCRIPTION ............................................................................................1 Outputs .................................................................................................2 LED.......................................................................................................2 Optical Integrity (Oi)..............................................................................2 Communication......
  • IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X3302 includes the Automatic Optical Integrity (oi) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabilities. No testing wi
  • OUTPUTS Relays The standard detector is furnished with fire, fault and auxiliary relays. All three relays are rated 5 amperes at 30 VDC. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. The Auxiliary relay
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8576 Protect•IR® Multispectrum IR Flame Detector X3302 Detector Electronics Corporation 6901 West 110th Street • Minneapolis, Minnesota 55438 USA Tel: 952.941.5665 or 800.765.3473 • Fax: 952.829.8750 4/05 95-8576 1.4

Det-Tronics X3302 Instructions manual [PDF] (36 pages)

  • Identifier: id-1592550
  • Brand: Det-Tronics
  • Device: X3302 Security Sensors
  • Type: PDF
  • Key Aspects: Troubleshooting Information, Additional Modules and Accessories Guide, Common Issue Diagnostic Flows
  • UPD Date: 25.03.2026
  • Source File: 1588164.pdf
  • Pages: 36
  • Description: Complete device guide for the Det-Tronics X3302.
Pages Preview:
  • Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . . . . . 2 Communication . . . . . .
  • 1 95-8578 6.1 Important Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. attEntIon The X3302 includes the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabilitie
  • 95-8578 6.1 2 OUTpUTS Relays The detector is furnished with fire and fault relays. The relays are rated 5 amperes at 30 Vdc. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. Latching relays can be reset by
  • 3 95-8578 6.1 During the entire test, the detector gives no indication of alarm. To reset the controller status and alarms, place the keylock switch in Reset. Return the keylock switch to Normal when testing is complete. The Man oi test is nearly identical to the Mag oi test, except for the manner in which the test is initiated: • Place the keylock switch on the controller (R7404/ R7494) in the TEST position. • Press the SELECT button to select the app
  • 95-8578 6.1 4 GENERAL APPLICATION INFORMATION RESpONSE ChaRaCTERISTICS Response is dependent on the detector’s sensitivity setting, distance, type of fuel, temperature of the fuel, and time required for the fire to come to equilibrium. As with all fire tests, results must be interpreted according to an individual application. See Appendix A for third-party approved fire test results. Additional fire test results are available from Det-Tronics. IMpORTaNT
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8578 Multispectrum IR Flame Detector with Pulse Output X3302 6.1 Rev: 12/13 95-8578

Det-Tronics X3302 Instructions manual [PDF] (39 pages)

  • Identifier: id-1776574
  • Brand: Det-Tronics
  • Device: X3302 Security Sensors
  • Type: PDF
  • Key Aspects: Component Overview and Descriptions, Cleaning and Sanitization Methods, Basic Configuration Guidelines
  • UPD Date: 14.07.2026
  • Source File: 1763701.pdf
  • Pages: 39
  • Description: Complete device guide for the Det-Tronics X3302.
Pages Preview:
  • Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . 2 Communication . . . . . . . . . . . . . . . . . . . . . 3 Data Log
  • 95-8768 1 2.1 IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X3302 includes the Automatic oi® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabilities.
  • 95-8768 2 2.1 OUTPUTS Relays The standard detector is furnished with fire, fault and auxiliary relays. All three relays are rated 5 amperes at 30 Vdc. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. The Aux
  • 95-8768 3 2.1 The X3302 signals a fault condition when less than half of the detection range remains. This is indicated by the Fault output and is evident by the yellow color of the LED on the face of the detector. The oi fault condition is self-clearing if the optical contamination is temporary. If the contamination is not automatically cleared and the oi fault remains, the detector may require cleaning or service. See the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
2.1 95-8768 Instructions Multispectrum IR Flame Detector X3302

Det-Tronics X3302 Addendum [PDF] (16 pages)

  • Identifier: id-1867915
  • Brand: Det-Tronics
  • Device: X3302 Security Sensors
  • Type: PDF
  • Key Aspects: Routine Functionality Testing, Periodic Inspection Checklists, User Training Recommendations
  • UPD Date: 14.05.2026
  • Source File: 1854847.pdf
  • Pages: 16
  • Description: Installation guide for the Det-Tronics X3302.
Pages Preview:
  • Table of Contents DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . 2 GENERAL APPLICATION INFORMATION . . 3 Response Characteristics. . . . . . . . . . . . . 3 Important Application Considerations . . . 3 IMPORTANT SAFETY NOTES . . . . . . . . . . . 3 WIRING PROCEDURE . . . . . . . . . . . . . . . . . 3 Wire Size and Type . .
  • 1 95-8790 1.1 WARNING Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X-Series flame detectors include the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operat
  • 95-8790 2 1.1 OUTPUTS Relays The detectors are furnished with fire and fault relays. The relays are rated 5 amperes at 30 Vdc. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. An alarm condition will normal
  • 3 95-8790 1.1 GENERAL APPLICATION INFORMATION RESPONSE CHARACTERISTICS Response is dependent on the detector's sensitivity setting, distance, type of fuel, temperature of the fuel, and time required for the fire to come to equilibrium. As with all fire tests, results must be interpreted according to an individual application. See Appendix A, the FM Approval and Performance Report, in each models manual for third-party approved fire test results. Additional
  • 95-8790 4 1.1 “B” and “D” leads of all other detectors in order to prevent false alarms resulting from crosstalk between zones. It is recommended that the “A” and “C” leads also be shielded to provide maximum immunity to EMI/RFI. (See Figures 3 through 7.) In applications where the wiring cable is installed in conduit, the conduit must not be used for wiring to other electrical equipment. If disconnection of power is required, separate disc
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1.1 95-8790 Addendum Det-Tronics X-Series Flame Detectors with Pulse Output

Det-Tronics X3302 Instructions manual [PDF] (20 pages)

  • Identifier: id-1867916
  • Brand: Det-Tronics
  • Device: X3302 Security Sensors
  • Type: PDF
  • Key Aspects: User Training Recommendations, Error Code Explanations, Step-by-Step Assembly Procedures
  • UPD Date: 03.08.2026
  • Source File: 1854846.pdf
  • Pages: 20
  • Description: Operational manual for the Det-Tronics X3302.
Pages Preview:
  • Table Of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 HARDWARE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INSTALLAT
  • DESCRIPTION Det-Tronics X-Series Flame Detectors record pertinent configuration and event information in the device’s non- volatile memory. Important detector status data such as power-up/down, faults and alarms are date and time stamped as they occur and stored in the electronic module located inside the detector enclosure. The Inspector Monitor software allows the user to later upload this data to a personal computer (PC) where it can be displayed, sav
  • 2 95-8751 3.1 NOTE The PC must always be located in a non- hazardous controlled location. Modbus communications are only available on X-series detectors that have Relay, Relay/4-20mA, and Pulse outputs. Modbus communications are not available on X-series detectors that have HART or EQP outputs. NOTE Communication between the sensor module and the PC uses the Modbus RTU protocol, with the sensor module configured as a Modbus slave. Alternate Method NOTE
  • 3 95-8751 3.1 SOFTWARE The Enhanced Flame Inspector software can be run directly from the CD drive or it can be installed onto the hard drive. To install the software onto the hard drive, use the standard Windows procedure to copy the file to a folder. To create an optional shortcut, right click on the file in the folder and click on Create Shortcut. Drag the shortcut icon to the desktop window. Double click on the shortcut icon to run the program. STARTUP
Document Preview & Text Transcription (Main Page)
Click to expand and read text
3.1 95-8751 Instructions Enhanced Flame Inspector Software for use with Det-Tronics X-Series Flame Detectors

Det-Tronics X3302: Security Sensors Category Related Instructions

1290 infinity
Agilent Technologies 1290 infinity
16.05.2026 282 pages

Agilent Technologies Agilent 1290 Infinity Binary Pump User Manual User support manual for the Agilent Technologies 1290 infinity Water Pump. The document provides guidance on safety and installation procedures, daily usage, technical specifications.

5-PBA90003
Elpas 5-PBA90003
07.04.2026 3 pages

Elpas Personal Safety Bracelet P/Ns: 5-WTD40100-0, 5-WTD40101-0, 5-WTD41100-0 and 5-WTD41101-0 User Guide www.elpas.com Page 1 of 3 V2/Sept 2012 Introduction The Personal Safety Bracelet is a wrist worn Active RFID Tag that provides around- the-clock monitorin Instructions for safe usage of the Elpas 5-PBA90003 Security Sensors. This reference manual explains security instructions, device reset instructions, service instructions.

iNels DMD3-1
Elko iNels DMD3-1
23.06.2026 2 pages

DMD3-1 1/2 110° + - BUS BUS BUS + BUS - DALI DALI RUN SET 140° 4 m 4 m Combined detector EN Characteristics • DMD3-1 is a combined detector for ceiling mounting. • DMD3-1 can be used in two basic ways: - Motion detector - Sensor luminescence • The unit Complete device guide for the Elko iNels DMD3-1 Security Sensors. This documentation outlines device reset instructions, performance guidelines, network configuration, hardware components.

PRO Plus
Paradox PRO Plus
16.03.2026 2 pages

476PET-TI06 PRINTED IN CANADA 02/2011 MADE IN CANADA English The Paradox PRO Plus with Pet Immunity (476PET) is a state-of- the-art analog detection system that incorporates the following unique features: • Patented Auto Pulse Signal Processing with two prog Instruction and usage manual for the Paradox PRO Plus Security Sensors. It covers topics such as internal layout, dimensions and layout, installation guides, functional overview.