DMP Electronics 263LTE Series Manuals
1 pdf manual(s) DMP Electronics 263LTE Series for free download (Document Types: Installation manual)
DMP Electronics 263LTE Series Installation manual [PDF] (4 pages)
- Identifier: id-2189529
- Brand: DMP Electronics
- Device: 263LTE Series Cell Phone
- Type: PDF
- Key Aspects: Detailed Installation Instructions, Glossary of Technical Terms, Product Performance Metrics
- UPD Date: 16.06.2026
- Source File: 2098105.pdf
- Pages: 4
- Description: Official operating instructions for the DMP Electronics 263LTE Series.
Click to expand and read text
DESCRIPTION Figure 1: 263LTE 1 INSTALL THE 263LTE Caution: Touch grounded metal to discharge static before handling the panel. XT30/XT50 Series Panels 1. Open the panel enclosure, set the reset jumper, and remove power from the panel. 2. Insert the included standoff into the panel standoff hole. 3. Align the 263LTE SMA antenna connector with the antenna hole in the top of the panel enclosure, place one washer around the connector, and secure it on the 12-pin cell module connector. See Figure 2. Note: For XT50 panels, install the included washers between the antenna and the panel. 4. Align the 263LTE standoff hole with the standoff already placed in the panel and snap it into place. The 263LTE Series Cellular Communicator provides a fully-supervised alarm communication path over an LTE network. The 263LTE installs on the panel inside the enclosure and is powered by the panel so no additional enclosure, power supply, or battery back-up is needed. Compatibility Control panel firmware should be updated to the following versions when installing a 263LTE: • XT30/XT50 Series panels Version 212 and higher • XR150/XR550 Series panels Version 212 and higher What is Included • 263LTE Cellular Communicator • 383 antenna • PCB standoff • Hardware pack 1 2 3 4 Figure 2: 263LTE on an XT30/XT50 Panel Back of the 263LTE Standoff and Standoff Hole SMA Connector Figure 3: 263LTE on an XR150/XR550 Panel Standoff and Standoff Hole Back of the 263LTE XR150/XR550 Series Panels 1. Open the panel enclosure, set the reset jumper, and remove power from the panel. 2. Insert the included standoff into the XR150/XR550 Series panel standoff hole. 3. Secure the 263LTE on the 12-pin cell module connector. See Figure 3. 4. Align the 263LTE standoff hole with the standoff already placed in the panel and snap it into place. Washer (XT50 only) 263LTE SERIES CELLULAR COMMUNICATOR Installation Guide
263LTE Series: Related Instructions
INSTALLATION GUIDE 1103 Series Universal Transmitter Description The 1103 Series Universal Transmitter is a two-input transmitter with wall and case tamper typi Maintenance instructions for the DMP Electronics 1103 Series Transmitter. This guide provides information on usage recommendations, error codes, service procedures.
708 BUS EXTENDER MODULES Installation Guide DESCRIPTION RED 1 2 3 4 5 6 YEL GRN BLK CONNECT TO PANEL MODEL 708 RED 1 2 3 4 5 6 YEL GRN BLK CONNECT TO DEVICES MO User instruction booklet for the DMP Electronics 708 Control Unit. This reference manual explains internal layout, supported accessories, setup, installation steps.
INSTALLATION SHEET 7000 Series Thinline LCD Keypads Models 7060/7063/7070/7073 Description The DMP Model 7060, 7063, 7070, and 7073 Thinline LCD Keypads offer t Operating manual for the DMP Electronics Thinline 7060 Keypad. This guide presents instructions on diagnostic information, application scenarios, device operation tips, maintenance schedule.
1100X SERIES WIRELESS RECEIVER Installation Guide 1 2 SELECT A LOCATION The receiver should be centrally located between the DMP panel and the 1100 Series trans Complete usage guide for the DMP Electronics 1100X Series Receiver. It details safety instructions and connectivity options, device reset instructions, setup instructions, configuration options.
User reference guide for the DMP Electronics XTLplus Control Panel. It provides information on installation and calibration steps, service procedures, operating conditions, technical specifications.
PROGRAMMING GUIDE XR500 SERIES CANADIAN COMMAND PROCESSOR™ PANEL Complete installation manual for the DMP Electronics XR500 SERIES Security System. This documentation details procedures for compatibility information, performance guidelines, internal layout.
Similar Manuals in the Cell Phone Category
Level 1-2 Service Manual C139 GSM 900/1800 GSM 850/1900 C139 Dual Band Wireless Telephone Operating and setup manual for the Motorola C139 - Cell Phone - GSM Telephone. It explains maintenance and operational safety, hardware components, detailing setup.
OnePlus Nord 2 5G User Manual Due to software updates, your experience of the software interface (including but not limited to software features, user interface Complete instruction guide for the OnePlus Nord 2 Cell Phone. It describes maintenance tasks and device reset instructions, hardware components, device operation tips, usage tips.
PHONE COMPONENTS 2 ONSCREEN ICONS 4 USING THE BATTERY AND CHARGER 5 Installing the Battery 5 Removing the Battery 5 Charging the Battery 6 BASIC FUNCTIONS 7 Tur Complete device guide for the LG LG6100 Cell Phone. The manual covers procedures for warranty information, assembly reference, performance details, troubleshooting tips.
SAR Information FCC Statement Declaration of Conformity Sony Ericsson WT13i GSM GPRS/EDGE 850/900/1800/1900 Comprehensive user handbook for the Sony Ericsson WT13i Cell Phone. The document explains technical specifications, software updates, technical assistance, assembly reference.