Doro Primo 406 Manuals

IMPORTANT! Use only compatible memory cards with this device. Compatible card type: microSD, microSDHC. Incompatible cards may damage the card itself, the device and corrupt any data stored on the card. Depending on the market some phones may have a pre-installed memory card. 4. Insert the battery (required) Push it into the battery compartment. Ensure that the three contacts on the battery touches the three spring contacts in the battery compartment. 5. Replace the cover and press it all the way around to make sure it is closed. 1. Receiver/ loudspeaker Make calls holding the phone to your ear 2. Display 3. Speed dials Speed dial the numbers saved under M1, M2 and M3 4. Left soft key Press to open main menu 5. Right soft key press to open phone- book 6. Call key Make and answer calls; Press once to open the call log 7. Camera key 8. Arrow keys Press to open shortcut functions; press to open mes- sages; scroll up and down in menus and lists 9. End key Press to end a call; press to return to standby; press and hold to turn the phone on or off 10. Numerical keys Press to enter num- bers; long press key 1, to call your voice mailbox (phone number must be stored); when writing, press to input numbers or char- acters 11. * key Press to enter “*”/ “+” / “P”/“W“; when writing, press to enter special characters 12. # key Long press to toggle between Silent and normal mode 13. Headset socket For 3.5 mm standard headset 14. Torch key Switch torch on and off 15. LED Red = battery charging 16. LED Blue = battery full Blinking slowly: missed call 17. Camera LED and torch 18. Camera lens 19. SOS button 20. Loudspeaker 21. Micro-USB port For charger 22. + and - keys Adjust ring volume and loudspeaker volume 23. Charging cradle 24. Cradle contacts 2. Insert the SIM card (required) Inser the SIM card by carefully slide it under the metal bracket. Make sure the contacts on the SIM card face down and the cut off corner is aligned with the immersed shape of the bracket. Do not scratch or bend the card contacts. Try not to touch the contacts with your fingers. Tip: Some features require extra memory, to expand your phone’s storage capacity, install a micro SD card. 3. Micro-SD card (optional) Lightly press the card holder and push it carefully toward the corner of the compartment. The card holder can now be flipped up vertically. Place the memory card in the black plastic bracket. Make sure that the memory card contacts face down and that the card is placed in accordance with the marked area (see figure). Do not scratch or bend the card contacts. Push the metal holder back down, press it flat and slide it until it snaps into place. English EN When the battery performance is low and the phone is still on, the empty battery symbol flashes to indicate the battery state and an alarm signal will sound. To recharge the battery, connect the mains adapter to the micro USB connector on the bottom side of the phone. Alternatively you can place the telephone in the charge cradle connected to the mains adapter via the USB cable. During charge, the red charge LED is on. The battery charge icon moves during charge (visible in the upper right corner of the display). It takes approximately 3 hours to fully charge the battery. When fully charged the charge icon stops moving. Power on the phone Press and hold the red key on the phone at least 2 seconds to turn it on or off. If the SIM card is valid and protected with a PIN code (Personal Identification Number), Enter PIN is displayed. Enter the SIM PIN code and press OK ( upper left corner of keypad). Delete with Delete ( upper right corner of keypad). Set the language By default the phone’s menu language is determined by the SIM card. You can always switch between the languages supported by the phone. 1. Press Menu â Settings â OK. 2. Select Phone settings â OK. 3. Select Language â OK. 4. Select language from the list â OK. Set time and date 1. Press Menu â Settings â OK. 2. Select Time and date â OK. 3. Select Set time/date â OK. 4. Enter the time (HH:MM) â . 5. Enter the date (DD.MM.YYYY) â . 6. Select OK. Make a call 1. Enter the phone number with the area code. You can delete digits with Clear. 2. Press to dial. Press Abort to cancel the call. 3. Press to end the call. Tip: For international calls, always enter a + symbol before the country code to be able to use the phonebook optimally in any country. Press the * key twice to enter the inter- national area code +. Speed dial (M1, M2, M3) Note! The contacts for the speed dial keys must already be stored in the Phonebook. M1, M2 and M3 setup 1. Press Menu â Contacts â OK. 2. Select a contact for M1, M2 or M3 keys. 3. Press Options â Speed dial â OK. 4. Select the line M1, M2 or M3 â Save. 5. Confirm the Save? with Yes. SOS calls (local, national, international emergency) As long as the phone is switched on, it is always possible to place an SOS call by entering the main local emergency number for your present location followed by . Some networks accept calls to emergency numbers without a valid SIM card. Contact your service provider for more information. Note! Credit is NOT required - but the SIM card must be registered and activated. Emergency numbers are only intended for urgent assistance, and should only be called in an emergency. Please do not misuse the emergency number as this may prevent someone with a real emergency from getting through. Volume control You can adjust the volume during a call using the side keys +/-. The volume level is shown on the display. Answer a call 1. Press or Answer to accept the call or press Reject to reject the call (busy signal). Alternatively, you can press to reject the call directly. 2. Press to end the call. Create phonebook entry 1. Press Menu â Phonebook â OK. 2. Select Add new contact â OK. 3. Select whether you want to save the contact on the SIM card or in the phone. 4. Enter a name for the contact. 5. Press . 6. Enter the phone number including the area code. 7. Then press Options â Save â OK. Tip: For international calls, always enter a + symbol before the country code to be able to use the phonebook optimally in any country. Press the * key twice to enter the inter- national area code +. Enter text Select character • Press a numerical key repeatedly until the desired character is shown. • Wait a few seconds (until the blue or yellow background of the character has disappeared) before entering the next character. Special characters • Press * to view a list of special characters. • Select the desired character with * or # (to move left and right) and press OK to enter. Move the cursor within text • Use the keys / to move the cursor within the text. Upper case, lower case and numerals • Press # to choose the input mode. The symbol at the top left in the display indicates the input mode. SOS call setting This is a private emergency call function. Do not enter any local, national or interna- tional emergency numbers such as 110 or 112, etc.! Activate the emergency call function. 1. Press Menu â Settings â SOS Setting â OK. 2. Select Emergency alert â OK. 3. Select On or Off â OK. IMPORTANT! If you deactivate the emergency call function the emergency call key on the back of the telephone will not work. SOS Alarm Tone Alarm sound on or off. 1. Press Menu â Settings â SOS Setting â OK. 2. Select SOS Alarm Tone â OK. 3. Select On or Off â OK. Primo™ 406 Instructions Install SIM card, memory card and battery The SIM card and memory card holders are located inside the battery compartment. CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phone’s type approval and guarantee. 1. Remove the cover by placing your thumb on the back of the phone casing and pushing the cover downwards. If the battery is installed, slide your fingernail in the notch next to the battery to lift it up.