DRAKE PEG-NE24-IP-C Manuals

937-746-4556 www.rldrake.com Rev: 121817 / 651246700A PEG-NE24-IP-C Public Educational & Governmental Access Encoder INSTRUCTION MANUAL © 2017 R.L. Drake Holdings, LLC. Model Item # Description PEG-NE24-IP-C 1002613A HD PEG Channel H.264 Encoder with HD-SDI or Composite Video Input with L/R Audio and IP Output 2 937.746.4556 | www.rldrake.com We recommend that you write the following information in the spaces provided below. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Reverse engineering or disassembly is prohibited. Purchase Location Name: Purchase Location Telephone Number: PEG-NE24 Serial Number: Manual Revision This first instruction manual was created on 12/18/17 and is based on firmware release v3.0.0. For more information regarding product firmware releases, please visit our website at www.rldrake.com. You may also contact Technical Assistance at 937-746-6990 or by email: [email protected] 3 937.746.4556 | www.rldrake.com Table of Contents GENERAL & SAFETY INFORMATION SAFETY INSTRUCTIONS & CAUTION STATEMENTS ......................................................................................................... 4 GENERAL DESCRIPTION & FEATURES ............................................................................................................................... 6 SPECIFICATIONS .................................................................................................................................................................... 7 FRONT AND REAR PANEL OPERATION .............................................................................................................................. 8 INSTALLATION & SETUP INSTALLATION & POWER-UP ................................................................................................................................................ 9 LOGIN SCREEN ..................................................................................................................................................................... 10 UNIT CONFIGURATION STATUS TAB ...........................................................................................................................................................................11 ENCODER TAB ...................................................................................................................................................................... 12 BASIC SCREEN ....................................................................................................................................................................................12 COMPOSITING SCREEN ......................................................................................................................................................................16 ADVANCED SETTINGS SCREEN ........................................................................................................................................................18 SYSTEM CONFIGURATION TAB .......................................................................................................................................... 20 NETWORKING .......................................................................................................................................................................................20 REMOTE MANAGEMENT .....................................................................................................................................................................23 LOG SCREEN ........................................................................................................................................................................ 24 FIRMWARE UPDATES UPDATE TAB ......................................................................................................................................................................... 24 ADMINISTRATION PANEL ADMIN SCREEN .................................................................................................................................................................... 25 SERVICE & WARRANTY SERVICE .................................................................................................................................................................................. 30 WARRANTY ............................................................................................................................................................................. 31 4 937.746.4556 | www.rldrake.com Important Safety Instructions 1. Read Instructions—All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions—The safety and operating instructions should be retained for future reference. 3. Heed Warnings—All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions—All operating and use instructions should be followed. 5. Cleaning—Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleansers. Use a damp cloth for cleaning. 6. Attachments—Do not use attachments that are not recommended by the product manu- facturer as they may cause hazards. 7. Water and Moisture—Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories—Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation—Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. This product should not be placed in a built-in installation such as bookcase or rack unless proper ventilation is provided or the manufac- turer’s instructions have been adhered to. 11. Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or local power company. For products intended to oper- ate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization—This product may be equipped with a polarized alternat- ingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings—If this product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin, the plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13. Power-Cord Protection—Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14. Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and sup- porting structure, grounding of the lead-in wire to an antenna discharge unit, size of ground- ing conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A. 15. Lightning—For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 16. Power Lines—An outside antenna system should not be located in the vicinity of over- head power lines, other electric light or power circuits, where it can fall into such power lines or circuits. 17. Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry—Never push objects of any kind into this product through open- ings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 19. Servicing—Do not attempt to service this product yourself as opening or removing cov- ers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged, b. If liquid has been spilled, or objects have fallen into the product, c. If the product has been exposed to rain or water, d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjust- ment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e. If the product has been dropped or damaged in any way, and f. When the product exhibits a distinct change in performance—this indicates a need for service. 21. Replacement Parts—When replacement parts are required, be sure the service techni- cian has used replacement parts specified by the manufacturer or have the same characteris- tics as the original part. Unauthorized substitutes may result in fire, electric shock or other hazards. 22. Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Heat—The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. NOTE TO CATV SYSTEM INSTALLERS: THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820 - 40 OF THE NEC WHICH PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL. FIGURE A Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS GROUND CLAMP NEC - NATIONAL ELECTRIC CODE WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE POWER SUPPLY COVERS NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL ! CAUTION ! CAUTION STATEMENT An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

The PEG-NE24-IP-C is a stand-alone H.264 digital video PEG channel encoder with a single SD/HD-SDI, or composite video input, and an IP-encapsulation output via a single SFP Ethernet port. A separate RJ45 10/100 Ethernet port is provided for control and monitoring capability. The PEG-NE24-IP-C features selectable SDI PCM-embedded audio, or analog left and right audio. A Second Audio Program (SAP) channel is available via a SDI PCM-embedded audio track. Audio compression can be either Dolby® Digital, MPEG1-Layer 2 stereo, or AAC stereo. DESCRIPTION Document#651246900A / Item#1002613A www.rldrake.com PEG-NE24-IP-C QUICK GUIDE STEP 1: Setup and Login First, connect the appropriate input and output video cables and plug in the PEG-NE24 power cable. Local or remote communication with the unit is only possible through a GUI-based menu via any standard web browser Chrome or Firefox is recommended, for IE use IE8 minimum. Before being able to communicate with the unit, the user must configure the computer’s Local Area Network connection to be in the same sub- net as the PEG default IP ( 172.16.70.1 ). Connect an Ethernet cable from your computer to the Control 10/100 port of the PEG. • Assign “172.16.70.2” as the static IP address for the control computer. • Enter “172.16.70.1” (default address) into the Browser to access the PEG Encoder. • Login with Username: “admin” and password “pass”. Sets global settings that apply to both streams and the possible outputs. These settings, for the Primary stream, set parameters for streaming an HD or SD stream, depending on the video input HD or SD source. See “C: SD Only Stream Settings” for SD-specific settings. Video Source: Video input selection of SDI or Composite. Audio Source: Audio input selection of SDI or Analog (L/R). Audio Synchronization: A/V lip-sync adjustment used to adjust your audio to video synchronization. Stream Enable: Stream combinations available are: Video Encoder Format: MPEG-4/H.264 HD Video Bitrate (Mbps): Primary Stream; 3.5 to 13.0 (increments of 0.1) in H.264. NOTE: Once an input is applied, only the detected resolution will be displayed. Both SD & HD video bitrates are displayed only when no input is detected. Video Mode Flag: Setting adjusts video encoder mode for decoder compatibility. The following options are available: Frame-Only: Encoding mode used when the video input is progressive (ex. 720p). This mode can also be used to encode interlaced video (ex. 480i or 1080i). Field-Only: Encoding mode used when the video input is interlaced (ex. 480i or 1080i). Some decoders may have compatibility issues when decoding field encoding. NOTE: If the video input is 720P the encoding mode will automatically default to Frame-only mode, even if Field- Only mode is selected in the menu. Aspect Ratio: As described under “(C) SD-Only Settings”. 1 1 2 2a 3 4 4 5 STEP 2: Configure Encoding Global Configuration A Native Resolution B 1 3 2 4 Disable: Encoder is not streaming. Native: Encoder will stream an HD or SD stream depending on the video input being HD or SD source. SD Only: Encoder streams a SD stream regardless of video input being HD or SD source. Native + SD: Encoder streams an HD and SD stream or a SD stream and SD stream depending on video input being HD or SD source. VIDEO SETTINGS This section is for the SD-only stream and sets parameters for streaming SD off the video input source. Most of the settings are the same as those found under Native Resolution, with the following exceptions: Audio Encoder Format: Select MP2 for MPEG-1 Audio Layer 2; AC-3 for Dolby Digital AC-3; AAC (Advanced Audio Coding). Audio DialNorm (dB): -1 to -31 (increments of 1). Provides meta-data for audio playback gain for Dolby AC-3 compression. Audio Bitrate: 128, 192 or 384 Kbps. HD TS Bitrate (Mbps): Primary Stream; 0.415 to 25 incremented by 0.125 (TS bitrate must be greater than 0.400 Mbps + audio bitrate + video bitrate). Destination IP / Destination Port: User-defined unicast or muliticast IP address and port number determined by downstream network connectivity device. IP Stream TTL: 1 to 255, determined by application. 6 7 2b 8 9a 5 11 12 STEP 2: Configure Encoding (continued) SD Only Stream Settings C AUDIO SETTINGS TRANSPORT STREAM SETTINGS IP SETTINGS SD Video Bitrate (Mbps): 1 to 4 (increments of 0.1) in H.264. SD Only must be enabled to use under Native Resolution. Aspect Ratio: Affects only SD 480i inputs. Video display can be set for 4:3 (normal SD) or 16:9 (widescreen). SD Only must be enabled to use under Native Resolution. When native resolution is 720p or 1080i, the SD only output can be set as the following: SD TS Bitrate (Mbps): 2 to 25 incremented by .125. SD Only must be enabled to use under Native Resolution. 9b 5 2b 1 3 7 8 2 6 4 9a 12 11 16:9 4:3 Squeeze - 640 x 480 4:3 4:3 Letterbox - 640 x 480 4:3 Letterbox - 720 x 480 4:3 Center - 640 x 480 4:3 Center - 720 x 480 9b

800-523-6049 www.rldrake.com Rev: 072920 / 651237100E PEG-NE24-IP & PEG-NE24-IP-C Models Public Educational & Governmental Access Encoder INSTRUCTION MANUAL © 2018 R.L. Drake Holdings, LLC. Model Item # Description PEG-NE24-IP 1002606A HD PEG Channel Encoder with HD-SDI Input and IP Output PEG-NE24-IP-C 1002613 HD PEG Channel Encoder with HD-SDI or Composite Video Input with L/R Audio and IP Output 2 800-523-6049 | www.rldrake.com We recommend that you write the following information in the spaces provided below. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Reverse engineering or disassembly is prohibited. Purchase Location Name: Purchase Location Telephone Number: PEG-NE24 Serial Number: Manual Revision This instruction manual was updated on 08/17/17 with changes made in firmware release Version 2.6.3. For more information regarding product firmware releases, please visit our website at www.rldrake.com. You may also contact Technical Assistance at 800-523-6049 or by email: [email protected] 3 800-523-6049 | www.rldrake.com Table of Contents GENERAL & SAFETY INFORMATION SAFETY INSTRUCTIONS & CAUTION STATEMENTS ......................................................................................................... 4 SPECIFICATIONS .................................................................................................................................................................... 6 GENERAL DESCRIPTION & FEATURES ............................................................................................................................... 7 FRONT AND REAR PANEL OPERATION .............................................................................................................................. 8 INSTALLATION & SETUP INSTALLATION & POWER-UP ................................................................................................................................................ 9 LOGIN SCREEN ..................................................................................................................................................................... 10 UNIT CONFIGURATION STATUS TAB ...........................................................................................................................................................................11 ENCODER TAB ...................................................................................................................................................................... 12 BASIC SCREEN ....................................................................................................................................................................................12 COMPOSITING SCREEN ......................................................................................................................................................................16 ADVANCED SETTINGS SCREEN ........................................................................................................................................................18 SYSTEM CONFIGURATION TAB .......................................................................................................................................... 20 NETWORKING .......................................................................................................................................................................................20 REMOTE MANAGEMENT .....................................................................................................................................................................22 LOG SCREEN ........................................................................................................................................................................ 24 FIRMWARE UPDATES UPDATE TAB ......................................................................................................................................................................... 24 ADMINISTRATION PANEL ADMIN SCREEN .................................................................................................................................................................... 25 SERVICE & WARRANTY SERVICE .................................................................................................................................................................................. 30 WARRANTY ............................................................................................................................................................................. 31