DSB 235-TP Manuals

Touch panel indicator ： Pouch indicators Temperature indicators Temp. Up Temp. Down Operation Procedure 1.Flip the support tray and wait for Green 2.Insert the documents to be laminated at light to start lamination. center pouch location.. 3. Place the laminated document at the arrow 4. Lamination will start location. automatically. Laminating speed 300mm/min No. of rollers 2 Pouch thickness 75MIC 100MIC 125MIC Voltage 220V Max. width 238mm Pre-heating time 4-5min Max. thickness 0.4mm File size Up to A4 size Dimension N.W. 1.5Kg CHARACTERS and FUNCTIONS: This machine can be used to laminate pouches under COLD &HOT conditions, in which the interlayer can be pictures, cards, document paper, etc (with thickness less than 0.4mm). The pouches can take size up to A4 paper. Attention: 1. Keep this machine horizontally with sufficient space for operation. 2. Please use voltage of 220V/ 50Hz during operation. OPERATION INSTRUCTION COLD LAMINATING Lift back support tray，turn on the power switch, adjust the touch panel to the position of the “Cold ” and it will start laminating automatically. HOT LAMINATING WITH TEMPERATURE CONTROL 1. According to pouch thickness, adjust the temperature transfer switch on the touch panel in accordingly. The indicator is red during the preheating stage. 2. After 4~5 minutes of warming up，the indicator will turn green. 3. Put one interlayer which you want to be laminated into a folio pouch and insert them together into the entrance of the laminator horizontally for immediate lamination. 4. Adjust the temperature from the temperature indicator for your ideal result. Laminator Operation Manual Model No：235-TP Laminator Operation Manual Model No：235-TP 369*120*95mm