EAW VFS220i Manuals

DOUBLE 12-INCH SUBWOOFER See NOTES TABULAR DATA for details Configuration Subsystem: Transducer Loading SUB 2x 12 in cone Vented Operating Mode: Amplifier Channels External Signal Processing Single-amp LF/LF DSP w/1-way filter PERFORMANCE Operating Range: 33 Hz to 154 Hz Nominal Beamwidth: Horz 360° Vert 360° Axial Sensitivity (SPL): LF1/LF2 (whole space) 96 dB 33 Hz to 154 Hz (half space) 102 dB 33 Hz to 154 Hz Input Impedance (ohms): Nominal Minimum LF1/LF2 4 4.2 @ 143 Hz High Pass Filter: High Pass=>35 Hz, 24 dB/octave Butterworth Accelerated Life Test: System LF1/LF2 63.2 V 1000 W @ 4 ohm Calculated Axial Output Limit: Average Peak LF1/LF2 (whole space) 126 dB 132 dB (half space) 132 dB 138 dB ORDERING DATA Description Part Number EAW VFS220i Dual 12-inch Subwoofer Black 2041018-90 EAW VFS220i Dual 12-inch Subwoofer White 2041033-90 Optional Accessories EAW Eyebolt/Forged Shoulder (M10) 0031810 EAW SBK-MK23_VFS-VFR129 Flybar Black [FB2VSK] 2038319 EAW ACC CASTER KIT 100 [ACC-CK100] 0032377-90 VFS220i Specifications Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com August 2013 Part Number: RD0752 Rev 100 EAW products are continually improved. All specifications are therefore subject to change without notice. FEATURES • High output sub bass system • Dual 12-in cone transducers • Optimally vented for increased response • Extended pole mount cup creates stable base • Easy lift handles (Black version only) DESCRIPTION The VFS “i” revision brings the VF concept more fully into the EAW product line. VFS “i” Series black versions use handles from the KF and JF Series. An installation only white version comes without handles or a pole mount cup. The VFS220i sub bass system includes dual, direct radiating 12-in LF cone transducers mounted in an optimally vented enclosure. Enclosure venting uses the enclosure’s resonance to enhance LF response while limiting driver wear. The VFS220i black version includes traditional portable features such as a pole-mount cup, parallel NL4 4-terminal connectors, barrier strip inputs and handles that accept accessory covers for permanent installation. The white, installation-only versions omit handles and the pole-mount cup but in- clude NL4 connector, barrier strip inputs and multiple mounting points. The new design leaves the enclosure sides completely smooth and attractive. Optional rigging hardware is available for preconfigured arrays of VFR and VFS systems. Six year warranty.