Elcometer E130-S Manuals

Operating Instructions The New Elcometer 130 Salt Contamination Meter The Elcometer 130 Model T meets the Radio and Telecommunications Terminal Equipment Directive. The Elcometer 130 Model S meets the Electromagnetic Compatibility Directive. This product is Class B, Group 1 ISM equipment according to CISPR 11. Class B product: Suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes. Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radiofrequency energy which is necessary for the internal functioning of the equipment itself. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The Elcometer 130 Model T complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. Elcometer 130 Model T: The FCC identifier and the Japanese radio law certification numbers can be located in the gauge's Regulatory screen found in the following menu structure Menu/About/Legal/Regulatory. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by Elcometer Limited could void the user's authority to operate the equipment under FCC rules. Elcometer 130 Model S: This Class B digital apparatus complies with Canadian ICES-003. Elcometer 130 Model T: Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United Kingdom are trademarks owned by Bluetooth SIG Inc and licensed to Elcometer Limited. Bluetooth SIG QDID = B014393. All other trademarks acknowledged. Gauge Dimensions: 250 x 145 x 50mm (9.8 x 5.7 x 1.9"). Gauge Weight: 780g (1.72lb) © Elcometer Limited 2013. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited. www.elcometer.com TMA-0578 Issue 01 Pb Hg R en R Section Page 1 GAUGE OVERVIEW AND BOX CONTENTS........................................................... 4 2 GETTING STARTED................................................................................................. 5 3 MEASURING SOLUBLE SALTS............................................................................... 8 4 MEASURING CONDUCTIVITY (T)........................................................................... 10 5 VERIFYING THE GAUGE CALIBRATION................................................................ 11 6 THE DISPLAY........................................................................................................... 11 7 THE GAUGE FEATURES......................................................................................... 13 8 BATCHING (T).......................................................................................................... 21 9 DOWNLOADING DATA USING ELCOMASTER 2.0................................................ 28 10 ELCOMASTER MOBILE.......................................................................................... 48 11 CLOUD COMPUTING WITH ELCOMASTER (T)..................................................... 50 12 GETTING THE MOST OUT OF ELCOMASTER 2.0................................................ 51 13 CHANGING THE WELCOME SCREEN................................................................... 53 14 GAUGE FIRMWARE UPDATES............................................................................... 54 15 GAUGE ICONS......................................................................................................... 55 16 GAUGE MENU STRUCTURES................................................................................ 56 17 TECHNICAL SPECIFICATION................................................................................. 58 18 SPARES & ACCESSORIES...................................................................................... 58 19 ADDITIONAL REFERENCE INFORMATION........................................................... 59 20 INDEX....................................................................................................................... 60 www.elcometer.com R en CONTENTS R en www.elcometer.com WELCOME Thank you for your purchase of this Elcometer 130 Salt Contamination Meter. Welcome to Elcometer. Elcometer are world leaders in the design, manufacture and supply of coatings inspection equipment. Our products cover all aspects of coating inspection, from development through application to post application inspection. The Elcometer 130 Salt Contamination Meter is a world beating product. With the purchase of this gauge you now have access to the worldwide service and support network of Elcometer. For more information visit www.elcometer.com ABOUT YOUR GAUGE The Elcometer 130 Salt Contamination Meter quickly and accurately measures the level of soluble salts on surfaces. The gauge is available in two models; Model S and T. This manual describes the operation of both Elcometer 130 models and indicates, where necessary, which specific model(s) the feature is available on in brackets after the feature eg. S for Model S, T for Model T. All versions of the gauge feature an easy-to-use menu driven graphical interface which guides the user through tasks such as gauge configuration and calibration adjustment. CONVENTIONS IN THESE INSTRUCTIONS The Elcometer 130 is operated using a simple menu structure which helps you get the most from your gauge. As an example, the Languages option is located within Setup which is under the Menu softkey and is shown in these instructions as: Menu/Setup/Language 3