Electro-Harmonix MOP-D10 Manuals

MOP-D10 Isolated Multi-Output Power Supply Congratulations on your purchase of the Electro-Harmonix MOP-D10 power supply. The MOP-D10 features ten isolated 9VDC outputs for powering effects pedals and other musical instrument accessories. Maximum output current on each output ranges from 100mA to 400mA: 4x100mA, 2x250mA, 2x300mA, 2x400mA. IMPORTANT SAFETY INSTRUCTIONS  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Clean only with a dry cloth.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Connect the device to a MAINS socket outlet with a protective earthing connection.  Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.  Protect the power cord from being walked on or pinched.  Unplug this device during lightning storms or when unused for long periods of time.  WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  Do not expose this apparatus to dripping or splashing and ensure that no object filled with liquids is placed on the equipment.  Please keep the following conditions: o Maintain at least 6in. (15cm) of unobstructed air space on either side of the unit to allow for proper ventilation and cooling. Air must be capable of freely moving around the device. o The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc. o No naked flame sources, such as lighted candles should be placed on the apparatus. o Apparatus is not for use in tropical climates.  Refer all servicing and maintenance to qualified service personnel including replacement of fuses. Changes and modifications not expressly approved by EHX can void the warranty.  DO NOT attempt to open the chassis. There are no user serviceable parts.  When installing this product be sure to use the supplied mounting hardware. If parts other than those supplied are used, the unit may be damaged internally, or may not be held in place securely and become dislodged. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the product. This equipment is not suitable for use in locations where children are likely to be present.