Elkron DC200 Manuals

1 pdf manual(s) Elkron DC200 for free download (Document Types: Manual )

Elkron DC200 Manual  [PDF] (8 pages)

  • Identifier: id-1210906
  • Brand: Elkron
  • Device: DC200 Security System
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Warranty and Service Information, Documentation and Revision History
  • UPD Date: 06.09.2026
  • Source File: 947369.pdf
  • Pages: 8
  • Description: Practical user guide for the Elkron DC200.
Pages Preview:
  • 2/8 BATTERY The DC200 uses two 1.5V “AAA” alkaline batteries with life expectancy of 2 years (an average of 50 day activations). Low battery warning typically starts 30 days before complete exhaustion. Note: When changing batteries, after removing the old batteries, press the Tamper Switch twice to fully discharge before inserting new batteries. SUPERVISORY SIGNAL • After installation, the Door Contact will automatically, on a random basis (60 ~100 m
  • 3/8 5. Test the Door Contact by opening and closing the door or window when the Control Panel is in “Walk Test” mode. The LED will flash every time the door is opened/closed. 6. Remove the Cover assembly, put the jumper switch in the normal “Off” position. Screw the Cover assembly back on to its base. 7. Installation is now completed. Note: Ensure the jumper is in the normal “Off” position when testing is finished. USING THE EXTENSION TERMINA
  • 4/8 VOYANT LUMINEUX En mode de fonctionnement normal, le voyant lumineux ne s'allume que dans les situations suivantes : • Lorsque le capot est ouvert et que le commutateur anti-sabotage est violé, le voyant s'allume. • Lorsque le sabotage perdure ou que le détecteur d’ouverture est en état de pile faible, le voyant s'allume à chaque activation du détecteur de porte. Toutefois, lorsque le détecteur est en mode test, le voyant clignote à chaque
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1/8 PARTS IDENTIFICATION Remove cover by loosening the bottom fixing screw revealing the inside of the Door Contact. LED indicator Learn / Test button Tamper Switch Extension Terminal JP1 = Test / Normal Mode Jumper Jumper (ON): Door Contact is in Test mode. Jumper (OFF): Door Contact is in Normal mode (Factory default). JP2 = Supervision Enable / Disable Jumper Switch Jumper (ON): Supervision disabled (Factory default). Jumper (OFF): Supervision enabled JP3 = Internal Magnet Switch Bypass Jumper Switch Jumper (ON): the internal magnet switch is bypassed. Only the device connected to the Extension Terminal will activate the Door Contact. Jumper (OFF): the internal magnet switch is in use (Factory default). JP4 = Door Close Confirmation Enable / Disable Jumper Switch Jumper (ON): Door Contact will not send Door Close signal to Control panel. Jumper (OFF): Door Contact will send Door Close signal to Control panel (Factory default). LED INDICATOR • In Normal operation mode, the LED indicator remains off except in the following situations: o Cover is opened and the tamper switch is violated, LED will light. o A Tamper Condition persists or Door Contact is in Low battery condition, every time the Door Contact is activated, the LED will light. • However, if the Door Contact is in Test mode, the LED will light every time it is activated. GB DOOR CONTACT (DC200) CONTACT D’OVERTURE (DC200) MAGNETNI KONTAKT (DC200) DS80MM80-001A LBT80625 Jumper On The jumper link is inserted. Jumper Off If the jumper link is removed or “parked” on one pin.

Elkron DC200: Security Sensors, Security System Category Related Instructions

Pivio
Crossport Systems Pivio
08.08.2026 60 pages

Device user manual for the Crossport Systems Pivio Security System. The guide focuses on device overview, firmware updates, product handling.

SWDVK-825504TB
Swann SWDVK-825504TB
18.07.2026 2 pages

For more information on this product visit www.swann.com MONITORING KIT Smartphone Security Monitoring System DVR8-2550™ Networking Digital Video Recorder with 1TB Hard Drive & 4 x PRO-580™ Cameras EASILY CONNECT TO TV OR LCD MONITOR UPnP EASY CONNECTION T Instruction manual for the Swann SWDVK-825504TB Security System. The guide explains setup and daily usage, firmware installation, network setup.

6
Nokia 6
16.06.2026 121 pages

Nokia WiFi Beacon 6 Product Guide Nokia WiFi Beacon 6 HA-0336G-A WiFi Beacon Nokia WiFi Beacon 6 Product Guide 3FE-xxxxx-AAAA-TCZZA Issue: 01 Installation instructions for the Nokia 6 Security System. The guide explains setup and security instructions, usage procedures, interface navigation.

Home KEEPER Series
SOMFY Home KEEPER Series
31.03.2026 28 pages

Mon alarme Somfy et moi Notice d’utilisation simplifiée 1 Comment fonctionne mon système d’alarme ? Activer, désactiver ➔ ➔ L’application gratuite Somfy Protect permet de commander le système d’alarme, au même titre que le clavier LCD, la té Usage and setup manual for the SOMFY Home KEEPER Series Security System. The manual contains instructions for product specifications, product maintenance, service contacts.