EMPORIA GD61-UK Manuals

GD61(AB)-UK Quick-Start-guide GD61AB-UK_KA-ENG-V1.indd 1 06.12.19 15:45 all-guides. com 2 emporia GD61(AB)-UK OVERVIEW Display icons description There are three lines on the screen. The upper rows is for status indicators. The symbols on the right and bottom left are for labeling the softkey buttons. > The status indicators Signal strength  , alarm clock  ,ringtone off  , new message  , long number  , hands free  , talk , keylock  , phonebook  , repeated call  , call-lists - activity  , battery charging status > Indicators on the base (GD61AB only) Permanent glowing: – – TAM switched off; 0 TAM switched on; XX number of heard messages ; LX volume for message playback; FF memory full Flashing indicators: XX number of new messages; RA remote access; A1 Announcement and recording mode; A2 Announcement only mode; XX & FF alternately: Number of new messages and memory full 06 02 04 01 05 03 07 09 10 11 08 01 PHONEBOOK-key bring up the phonebook; back in menu 02 INTERN-key INT internal call; set up a conference call 03 OK-key bring up the menu; confirmation in menu settings 04 TALK-key start a call or pick-up; switch between handset and handsfree mode 05 HANG-UP-key end call; press and hold to switch on/off the handset 06 UP- & DOWN-key UP bring up the caller-list (income); DOWN bring up the call-list (outgoing); scroll in lists and menu; change volume 07 DELET-key R/CLR clear individual digits by entering; conference call 08 PAUSE-key RD/P redial; pause for PBX 09 Number-keys for entering phone numbers and letters for vanity numbers 10 STAR-key press and hold to switch on/off the keylock 11 HASH-key press and hold to switch on/off the ringtone GD61AB-UK_KA-ENG-V1.indd 2 06.12.19 15:45 emporia GD61(AB)-UK 3 GETTING STARTED > Place the phone Keep a distance of at least 1 m from the cordless telephone or electrical appliances to avoid background noise. > Insert batteries Open the battery compartment and insert the batteries. Please pay attention to the polarity. Then close the lid. After inserting, the time should be displayed on the screen. A correct display of the state of charge is only possible if the battery is initially fully charged and then discharged. Place the handset in the charging cradle for 8 hours. > Phone line cable Insert the transparent plug into the earphone cord socket ( ) on the underside of the handset-storage. The other end in the phone socket: In Germany in socket F. In Austria in the  -socket. > Plug in the power supply Insert the plug into the socket ( ) on the back of the device and the other side in a 220 V power.supply-socket. > Set display-language (see page 8) Change the display language if an incomprehensible language is set. > Set date & time (see page 9) If your service provider have activated caller ID, the time and date of the phone will be automatically updated by the network as soon as you receive a call. The network operator sends only month and day, not the year, you must set the year as it is needed to calculate the day for the timestamp. > Set dial mode (see page 9) Set the dialing mode correctly according to your network operator. > Screen backlight The backlight is on when you receive an incoming call, dial or press any key. It goes off when the phone is not in use. Notes: The handset is already registered at the base by factory-default. If you have bought a variant with several handsets, then all handsets are already registered. If nevertheless a handset should not be registered at the base, register it as described. (see page 9) GD61AB-UK_KA-ENG-V1.indd 3 06.12.19 15:45 4 emporia GD61(AB)-UK GOOD TO KNOW Your phone features are offered through a multi-level menu. > Main menu (first menu level) ·· In standby mode, press the OK-key to open the main menu. ·· Scroll with the UP or DOWN-key from one function to the next. The function can be seen in the display. ·· Press the OK-key to select the displayed function. The corresponding submenu opens, whose first entry is displayed. > Submenus ·· Scroll with the UP or DOWN-key from one function to the next. The function can be seen in the display. ·· Press the OK-key to select the displayed function. The corresponding submenu opens, whose first entry is displayed. ·· Press the PHONEBOOK-key to return to the previous menu item. > Back to standby ·· To return to standby press the HANG-UP-key . Procedures Example: Set menu language _ _ 3× _ HS SETTINGS _ _ 3× _ LANGUAGE _ _ _ > Step > That's to be done _ Press the OK-key. _ 3× Press the UP-key three times. _ HS SETTINGS The display shows HS SETTINGS _ Press the OK-key to confirm. _ 3× Press the UP-key three times. _ LANGUAGE The display shows LANGUAGE _ Press the OK-key to confirm. _ Use UP or DOWN to switch between English, Deutsch, Français, Italiano, Español, Portugues, Pyccknñ, Türkçe, Eλλhnika, Ykpaihcьknñ, Polski, Magyar, Svenska, Nederlands, Dansk and Norsk. _ Press the OK-key to save. GD61AB-UK_KA-ENG-V1.indd 4 06.12.19 15:45