Endress+Hauser FHX50 Manuals

Overview The manual applies to the following spare part set: Order number Original spare part set Use 71197334 Transmitter electronics FHX50 Levelflex FMP5x, Micropilot FMR5x, Micropilot FMR6x, Promag 200, Promass 200, Prosonic Flow 200, Prowirl 200 We recommend that the Installation Instructions are kept with the packaging at all times. Designated use The spare part set and the Installation Instruction are used to replace a faulty unit with a functioning unit of the same type. Use genuine parts from Endress+Hauser only. Only original spare part sets, intended by Endress+Hauser for the measuring device, must be used. The verification has to be done via W@M Device Viewer; this procedure is explained below. For some devices there is an overview of spare part sets inside the device. If the spare part set is listed there, the verification is not required. = www.endress.com/deviceviewer 2. 1. 3. 4. ? Order code Description Ser. No.: 12345 1. www.endress.com/deviceviewer 2. Enter serial number (Ser. No.), search for product data and click on "spare parts". 3. List of all spare parts sets for the device. 4. Determine the order number of the spare part set.  The spare part set can only be used if the order number of the spare part set corresponds to the order number on the spare part list. Authorized personnel Authorization to carry out a repair depends on the approval of the measuring device. The table shows the respective group of persons for each. The person who carries out the repair is responsible for safety during the work, the quality of work completed and safety of the device after repair. Products Solutions Services Installation Instructions Transmitter electronics FHX50 Levelflex FMP5x, Micropilot FMR5x, Micropilot FMR6x, Promag 200, Promass 200, Prosonic Flow 200, Prowirl 200 EA01064F/00/A2/04.17 71377985 *71377985* 71377985

Installation Instruction Transmitter electronics FHX50 Levelflex FMP5x, Micropilot FMR5x, Promass 200, Prowirl 200, Promag 200, Prosonic Flow 200 EA01064F/00/A2/03.15 71279010 Instruction is valid for the following spare part set: Designated use The spare part set and Installation Instruction are used to replace a faulty unit with a functioning unit of the same type. Use genuine parts from Endress+Hauser only. Only original spare part sets, intended by Endress+Hauser for the measuring device, shall be used.  The verification has to be done via Online Support, this procedure is explained below. Order number Original spare part set Usage Feature: Display, Operation Option 71197334 Transmitter electronics FHX50 Levelflex FMP5x, Micropilot FMR5x Promass 200 Prowirl 200 Promag 200 Prosonic Flow 200 L - Prepared for display FHX50 + M12 connection M - Prepared for display FHX50 + custom connection We recommend that the Installation Instructions be kept with the packaging at all times. For some devices there is an overview of the correct spare part set inside the connection compartment cover. If the spare part is listed there, the verification is not required. www.endress.com/support Choose device specific information. Enter the serial number (Ser. No.), search for product data and click on "spare parts". Display of all suitable spare parts. Check the order number of the spare part. Does the order number of spare part correspond to the order number in the spare part list? YES, the spare part can be used. NO, the spare part may not be used. Device specific information = ? 1. 3. 4. 5. Ser. No.:12345 2. www.endress.com/support 71279010

XA01053F-A/00/A3/01.12 71206334 Safety Instructions Display FHX50 ATEX: II 1 G Ex ia IIC T6 Ga II 2 D Ex ia IIIC Txx°C Db IECEx: Ex ia IIC T6 Ga Ex ia IIIC Txx°C Db 0 de - Dokument: XA01053F-A Sicherheitshinweise für elektrische Betriebsmittel für explosionsgefährdete Bereiche gemäß Richtlinie 94/9/EG (ATEX) und IEC 60079-0  ä 5 en - Document: XA01053F-A Safety instructions for electrical apparatus for explosion-hazardous areas according to Directive 94/9/EC (ATEX) and IEC 60079-0  ä 11 fr - Document : XA01053F-A Conseils de sécurité pour matériels électriques destinés aux zones explosibles selon Directive 94/9/CE (ATEX) et CEI 60079-0  ä 17