EnGenius EAP350 Manuals

EnGenius® Quick Installation Guide EAP150 802.11b/g/n Wireless Access Point Package Contents Unpack the box and verify the contents: • EAP150 802.11b/g/n Wireless Access Point • Category 5 Ethernet Cable • Power Adaptor • Wall Mount Kit • EAP150 802.11b/g/n Wireless Access Point Quick Installation Guide • EAP150 802.11b/g/n Wireless Access Point Instruction Manual • Resource CD Setting up the EAP150 After verifying the contents of the box, continue on to setting up the EAP150. Hardware Installation 1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information, verify with User Manual. 2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP150 and the other end to the RJ-45 port on the computer that will use the EAP150. Ensure that the cable is securely connected to both the EAP150 and the Computer. 3) Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP150 and the Power Adaptor to the electrical out. Once both connections are secure, verify the following: a) Ensure that the Power light on the right is on (it will be blue). b) Ensure that the Wireless light on the left is on (it will be blue). c) Ensure that the LAN (Computer/EAP150 Connection) light in the middle is on (it will be blue). d) Once all three lights are on, proceed to setting up the computer.

1 High Powered Gigabit Wired 802.11 b/g/n Multi-Function Access Point EAP350 11N Multi-Function Access Point V1.0

Quick Installation Guide Follow us i EAP350 - 802.11b/g/n/ Wireless Accesspoint Package Contents Unpack the box and verify the contenst: • EAP350 802.11b/g/n Gigabit Wired Wireless Access Point • Category 5 Ethernet Cable • Power Adaptor • Wall Mount Kit • EAP350 802.11b/g/n Wireless Access Point Quick Installation Guide • EAP350 802.11b/g/n Wireless Access Point Instruction Manual • Resource CD Setting up the EAP350 After verifying the contents of the box, continue on to setting up the EAP350. Hardware Installation 1. Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information, verify with User Manual. 2. Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP350 and the other end to the RJ-45 port on the computer that will use the EAP350. Ensure that the cable is securely connected to both the EAP350 and the Computer. 3. Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP350 and the Power Adaptor to the electrical out. Once both connections are secure, verify the following: a. Ensure that the Power light on the right is on (it will be blue). b. Ensure that the Wireless light on the left is on (it will be blue). c. Ensure that the LAN (Computer/EAP350 Connection) light in the middle is on (it will be blue). d. Once all three lights are on, proceed to setting up the computer. Computer Setup 1. After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is on. 2. For the next steps, refer to your Operating System User Manual 3. Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.) 4. If your PC is already on a computer network, ensure that you have set it to a Static IP Address on the interface (or Ethernet card that will use the EAP350) as 192.168.1.21 and the Subnet Mask address as 255.255.255.0. (Select Use the following IP Address radio button). Once the computer has been prepared, proceed to setting up the EAP350.

1 11N Multi-Function Access Point EAP350 11N Multi-Function Access Point V1.0

1