Entel HT544 Manuals

HTx44 Series HT544 | HT844 | HT944 Quick Start User Guide Designed in the United Kingdom guides.c

HT544 Quick Start User Guide Designed in the United Kingdom CONTACT For more information about our products please contact us: +44 (0)20 8236 0032 [email protected] entel.co.uk All Rights Reserved. Copyright Entel UK Ltd. For a detailed specifi cation on all products listed please visit our webpage - entel.co.uk Model Description IECEx Permitted models CNB550E 1800mAh Li-Ion battery pack  All HT500 Series CMP500 Speaker/microphone  All HT500 Series CHP950D Ear defender headset  All HT500 Series CHP950HS Ear defender headset  All HT500 Series CHP950HD Ear defender headset  All HT500 Series PTT951 Push to talk switch  All HT500 Series PTT950E Push to talk switch  All HT500 Series PTT951E Push to talk switch  All HT500 Series PTT951C Push to talk switch  All HT500 Series CXR16/950 Throat earphone/microphone  All HT500 Series CXR5/950 Skull earphone/microphone  All HT500 Series EA12/950 Earphone/microphone  All HT500 Series EA15/950 Earphone/microphone  All HT500 Series EA19/950 Earphone/microphone  All HT500 Series EHP950 Earphone  All HT500 Series The Entel IECEx transceivers should only be used with the specifi c, permitted accessories, as detailed above.

PREPARING YOUR RADIO FOR USE Attaching / removing the aerial Attaching / removing the battery pack 1. To attach, carefully align the aerial with the socket. Screw in the aerial clockwise (taking care not to cross the thread) until it is seated firmly with the accessory cover’s rubber ring between the aerial and the top of the radio. (A) 2. To remove, unscrew the aerial anti-clockwise. (B) 1. To attach, locate the pegs on the bottom of the battery into the slots on the radio and press the top of the battery against the radio. Secure battery by tightening the screw clockwise by hand. (Do not use any implement or overtighten). (C) 2. To remove, unscrew the locking screw anti-clockwise and pull the battery away from the top of the radio. (D) A B C D SWITCHING ON, RECEPTION AND SWITCHING OFF 1. To switch on, press and hold the on/off button (1) on the front of the radio. 2. When the radio has passed its diagnostic tests, it will emit a fanfare tone. 3. The radio will enter standby mode. This is indicated by the LED Amber flashing once every 5 seconds, signalling that the radio is ready for use. 4. Adjust the volume control (2) to select the desired volume level. 5. Using the channel buttons (3) ensure you have the correct channel selected. 6. When receiving a valid signal, the LED will illuminate steady green and audio will be emitted from the radio’s speaker or audio accessory (if attached) 7. When finished using the radio, switch off by pressing and holding the on/off button (1) until the radio beeps and the LED/LCD is extinguished. TRANSMITTING 1. Perform steps 1 through to 5 of Switching On, Reception and Switching Off. 2. Before transmitting, monitor the channel and make sure it is clear. 3. When receiving a signal, wait until the signal stops before transmitting. The transceiver cannot transmit and receive simultaneously. 4. Press the PTT (Push To Talk) button (4) to begin your transmission. To confirm transmission the LED illuminates red. 5. For best transmitted speech quality, you must talk directly into the radio’s microphone (9) at around 4cm between your mouth and the radio complete, the charger. 6. Please note: if you talk into the top of the radio or with your mouth further away, you will transmit poor quality speech. 7. When the transmission is finished release the PTT button. EU DECLARATION OF CONFORMITY We. Entel UK Limited of: 320 Centennial Ave, Centennial Park, Elstree. WD6 3TJ United Kingdom Tel +44 208 236 0032 [email protected] Declare under our sole responsibility that the product ranges specified below conform to the following standards or other nominative documents; HT544, HT844 V2 series, HT944 V2 series, EN 301 178-2 V1.2:2007 EN 60945:2002 EN 60950-1:2006 in accordance with Directive 1999/5/EC This declaration is valid for Directive 94/9/EC until 19 April 2016 This declaration is valid for Directive 2014/34/ EU from 20 April 2016 HT544, HT844 V2 series, HT944 V2 series EN 60079-0:2012 EN 60079-11:2012 Related certificates: HT844 V2 series, HT944 V2 series Sira 10ATEX2066X HT9XX marking Ex ll 2 G Ex ib llC T4 Gb HT8XX marking Ex ll 2 G Ex ib llA T4 Gb HT544 IECEx SIR 10.0097X Marking Ex ll 2 G Ex ib llA T4 Gb Sira Certification. Unit 6, Hawarden Industrial Park,Hawarden, Deeside. CH5 3US, UK Notified Body No. 0518 Quality Assurance Notification: Intertek. Intertek House, Leatherhead KT22 7SB, UK Notified Body No. 0359 Name: Mike Jamieson Position: Quality Manager Date: 1st December 2015 Signed: www.entel.co.uk HTx44 Series HT544 | HT844 | HT944 Quick Start User Guide Designed in the United Kingdom

HTx44 Series HT544 | HT844 | HT944 Quick Start User Guide Designed in the United Kingdom CONTACT For more information about our products please contact us: +44 (0)20 8236 0032 [email protected] entel.co.uk All Rights Reserved. Copyright Entel UK Ltd. Model Description ATEX IECEx Permitted models CNB550E 1800mAh Li-Ion battery pack  All HT500 Series CNB950E 1800mAh Li-Ion battery pack  All HT800 V2, HT900 V2 CMP500 Speaker/microphone  All HT500 Series CMP950 Speaker/microphone  All HT800 V2, HT900 V2 CHP950D Ear defender headset   All HT500, HT800 V2, HT900 V2 CHP950HS Ear defender headset   All HT500, HT800 V2, HT900 V2 CHP950HD Ear defender headset   All HT500, HT800 V2, HT900 V2 PTT951 Push to talk switch   All HT500, HT800 V2, HT900 V2 PTT950E Push to talk switch   All HT500, HT800 V2, HT900 V2 PTT951E Push to talk switch   All HT500, HT800 V2, HT900 V2 PTT951C Push to talk switch   All HT500, HT800 V2, HT900 V2 CXR16/950 Throat earphone/microphone   All HT500, HT800 V2, HT900 V2 CXR5/950 Skull earphone/microphone   All HT500, HT800 V2, HT900 V2 EA12/950 Earphone/microphone   All HT500, HT800 V2, HT900 V2 EA15/950 Earphone/microphone   All HT500, HT800 V2, HT900 V2 EA19/950 Earphone/microphone   All HT500, HT800 V2, HT900 V2 EHP950 Earphone   All HT500, HT800 V2, HT900 V2 Savox C-C500 Cert no. VTT 06 ATEX 043X   All HT800 V2, HT900 V2 Savox 100+ Cert no. VTT 06 ATEX 036X  HT981, HT981S Savox 400 Cert no. VTT 05 ATEX 009X  HT981, HT981S Savox, FPS-COM Cert no. ITS08ATEX25772X  HT981, HT981S, HT983, HT983U, HT983S, HT983SU SABRE-COM Cert no. ITS03ATEX21290X  HT981, HT981S, HT983, HT983U, HT983S, HT983SU FPS-COM-Plus VA R-C Cert no. ITS11ATEX27318X  All HT800 V2, HT900 V2 The Entel ATEX and IECEx transceivers should only be used with the specific, permitted accessories, as detailed above.