Epson FX-1050+ Manuals

Product Support Bulletin Subject: Power Specifications Date: 2/7/90 PSB No: P-0060 Page: 1 of 2 Originator: RFB The following information is a list of the power requirements for the Epson 9 and 24 pin printers and laser printers. 504 VA maximum

FX - 850/1050 DOT - MATRIX PRINTER Cross-head screwdriver d- Ribbon cartridge Platen knob Y .: f q-3 Printer Specifications Printing Print method: Print speed: 9-pin impact dot matrix Quality Draft NLQ Pitch Characters/second/line 10 220 12 264 10 45 12 54 Printing direction: Bidirectional logic-seeking for text unidirectional for graphics Line spacing: 1/6” or 1/8” or programmable in increments of 1/216th of an inch Paper feed speed: Single sheet: 48 ms/line (3.6” per sec) Continuous: 53 ms/line (3.0” per sec) Printable columns: Character pitch 10 pitch 10 pitch condensed 12 pitch 12 pitch condensed Maximum printed characters FX-850 FX-1050 80 136 137 233 96 163 160 272 Buffer: 8 Kbyte Character fonts: Draft NLQ Epson Roman 1 Epson Sans Serif 1 Interfaces The Epson interfaces that are compatible with the FX-850 and FX-1050 are listed below. Interface number Name #8143 RS-232 C/current loop interface #8148 Intelligent serial interface #8149 32Kbyte buffer serial interface Paper feeding methods: Friction Push tractor Cut sheet feeder (optional) Pull tractor (optional) Ribbon Cartridge ribbon, available in black only: #8750 (FX-850) #8755(M) (FX-1050) Life expectancy of ribbon: 3 million characters (14 dots/character) MCBF: For all components excluding print head: 5 million lines MTBF: FX 850 4000 power-on hours FX-1050 6000 power-on hours Print head life: 100 million characters (14 dots/character) Dimensions and weight: FX-850 FX-1050 Height: 5.9” 5.9” Width. Depth: 17.9” 24.8” 14.2” 14.2” Weight: 20.9 lbs 27.5 lbs Voltage: 120 VAC ± 10% Power consumption: 120 watts maximum Frequency: 49.5 to 60.5 Hz Insulation resistance: 10M ohms between AC power line and chassis Dielectric strength (between AC line and chassis): Can withstand 1.0 kV rms applied for one minute or 1250 VAC rms applied for one second. Temperature: Operation: 40°F to 95°F (5°C to 35°C) Storage: -22°F to 140°F (-30°C to 60°C) Characters: 96 standard ASCII character set (including italic characters) 13 international character sets Epson Extended Graphics characters set Paper width: Paper Sheet Single Sheet Continuous Envelopes L a b e l s FX-850 FX-1050 7.2 to 10.1" (182-257mm) 7.2 to 14.4"(162-366mm) 4 to 10" (101-254 mm) 4 to 16" (101-406.4 mm) 6.5" or 9.5" 6.5" or 9.5' 2.5" or 4.0* 2.5" or 4.0" Paper Length: Single sheet 7.2 to 14.3 inches (182 to 364 mm) Printable area: Single sheet 8.5 mm (0.33") or more Continuous paper #8165 #8172 Intelligent IEEE-488 interface 32 Kbyte buffer parallel interface I 22 mm (0.87") or more Number of copies: Up to 4 sheets including the original. Total thickness must not exceed 0.012” (0.32 mm) 9 - Pin Printers F X - 8 5 0 / 1 0 5 0 - 1

NEW FX-850/1050 Important Notice The FX-850 and FX-1050 have changed, but the model names have not been changed. This Product Information Guide is supplementary to the previous FX-850/7050 Product Information Guide for new models. The product codes for the previous and current versions of the FX-850/1050 are as follows: Also, the version number printed at the beginning of a self- test begins with MP for the previous version and PP for the current version. Note: Add this addendum to the previous FX-850/1050 Product Information Guide do not discard the old one. 9-Pin Printers NEW FX-850/1050-1

Y46199112004