-
Copyrights and Trademarks
2
-
Viewing the Manuals
5
-
Select Online Manual from the screen displayed.
6
-
A Airflow vents
8
-
E Movable base
9
-
F Anti-drying caps
11
-
A AC inlet
12
-
G LAN port
13
-
A Plight (Power light)
14
-
F l button
15
-
Warning or Error
17
-
Repeat and direct printing functions
19
-
Do not bend or tug the waste ink tube. Ink could
20
-
Introducing the Supplied Software
23
-
Starting Epson Control
24
-
Using EPSON Software Updater
25
-
Follow the on-screen instructions to continue.
26
-
Pre-treatment liquid (consumable)
28
-
Removing the T-shirt (media)
30
-
Always wear protective eyewear, gloves, and a
32
-
Remove the tap from the bag and check that the
33
-
Amount of pre-treatment liquid to
34
-
You need to press the fibers flat to produce even
35
-
Creating and Sending
36
-
Preparing the Platen
37
-
Gently hold the section that was peeled off the
38
-
Place the platen on a flat surface with the back
39
-
Remove the screw.
40
-
The thickness shown in the following table is the
41
-
If you do need to change the number of spacers,
42
-
There is no particular stacking order when
43
-
Installing the sleeve platen
44
-
Load the T-shirt (media)
45
-
Remove any lint from the printing surface, and
46
-
The printer detects the highest part of the print
47
-
Pull the parts of the shirt that extend beyond the
48
-
Frames for XS size platens as well as sleeve
50
-
Load the T-shirt so that the side seams and
51
-
Remove the frame from the platen.
52
-
Set the platen gap to a suitable value
54
-
If you have worked up to step 6 and then return to
55
-
Starting and Canceling
56
-
Fixating the Ink
57
-
Printing from a USB
58
-
Confirm that Select Print File is highlighted, and
59
-
When to Perform Various Maintenance Operations
60
-
When to perform
61
-
Cautions when operating
64
-
Using ink cleaner
65
-
Disposal of used
66
-
After 10 minutes from the start of cleaning the
67
-
Wipe the outside of the suction cap with a wide
68
-
Cleaning the scale and
69
-
Do not pull the scale with excessive force. If
70
-
Disposing of Used Consumables U “Disposal” on
71
-
Open the printer cover.
72
-
Clean Border of the Metal
73
-
Wipe the border of the metal on the right of the
74
-
Buttons that are used in the following operations
75
-
Remove the charging unit, and then press the Z
76
-
Checking for clogged
78
-
When L, M, S, and XS size platens are installed
79
-
Correcting the print
82
-
Look at the printed check pattern, and check the
83
-
Make sure the printer is on, and then remove the
84
-
Do not touch the IC chip on the top of the ink
85
-
Disposing of Waste Ink
86
-
Remove the waste ink tube from the used waste
87
-
Replacing the Head
88
-
Press the lever forwards, and then place the holes
90
-
Place the removed flushing pad in the packaging
91
-
Cyan ink x1
92
-
Prepare a Cleaning cartridge.
93
-
Clean the Platen without
94
-
Using the Control Panel Menu
95
-
USB File List
97
-
* Default Settings
98
-
Cleaning around head
99
-
Power On Cleaning
102
-
Reset All Settings
103
-
What to Do When a Message Is Displayed
104
-
What to do
105
-
You cannot print (because the
107
-
Check the printer operations.
108
-
Perform Feed Adjustment.
109
-
Clean the nozzle row for the White ink.
110
-
Have you optimized the temperature and
111
-
Platen Height Error is displayed while
112
-
Are you using a USB memory stick with a slow
113
-
Options and Consumable Products
114
-
Medium Grooved Platen
116
-
Notes When Moving or
117
-
Insert parts removed during the setup.
118
-
Table Showing the Scale on the Label and the Media
120
-
1024 x 768 or higher
124
-
On-demand ink jet
125
-
Where To Get Help
127
-
Help for Users in North America
128
-
1F., No.9, Ln. 379, Sec. 1,
129
-
Sales enquiries and product information
130
-
Help for Users in Hong Kong
131
-
079-26407176 / 77
132
-
Software License Terms
133
