Epygi QuadroE1/T1 Manuals

Epygi Technologies Increasing Quadro16x PSTN Capacity with QuadroE1/T1 Revision Revised By Date Initial AskanazK, AshotS LianaB Quadro variants: valid for SW-version: tested with SW version: Filename: Document2 Version: Template: SupportTemplate.dot Last saved: 4/26/2006 3:51:00 PM Abstract: This document describes how to connect a QuadroE1/T1 to a Quadro16x and configure both devices so that the QuadroE1/T1 can be used as a PSTN trunk extension for the Quadro16x. Please Note: This document contains confidential and proprietary information owned by Epygi Technologies Ltd. Any copying, use or disclosure of the document or the information contained herein without the written permission of Epygi Technologies Ltd. is strictly prohibited. Epygi Technologies Increasing Quadro16x PSTN Capacity with QuadroE1/T1 Table of Contents: 1 Introduction....................................................................... 3 2 References ......................................................................... 3 3 Requirements..................................................................... 3 3.1 Requirements to Quadro16x ................................................... 3 3.2 Requirements to QuadroE1/T1 ................................................ 3 4 Preparations ...................................................................... 4 4.1 Preconfiguration of Quadro16x................................................ 4 4.1.1 Ensure DHCP server is enabled......................................... 4 4.1.2 Obtain an IP address ...................................................... 5 4.1.3 Remove default PSTN routing rules ................................... 6 4.2 Preconfiguration of QuadroE1/T1............................................. 7 4.2.1 LAN settings configuration of QuadroE1/T1 ........................ 7 5 Connecting QuadroE1/T1 to Quadro16x............................. 9 6 Call Routing Configuration ............................................... 10 6.1 Routing PSTN calls from Quadro16x to QuadroE1/T1................ 10 6.2 Routing calls from QuadroE1/T1 to PSTN ................................ 13 6.2.1 Routing emergency calls from QuadroE1/T1 to PSTN ......... 13 6.2.2 Routing regular PSTN calls from QuadroE1/T1 to PSTN ...... 15 6.3 Routing PSTN calls from QuadroE1/T1 to Quadro16x................ 17 7 Summary.......................................................................... 20 PAGE 2 27-Apr-06 Epygi Technologies Increasing Quadro16x PSTN Capacity with QuadroE1/T1 1 Introduction This document describes how to connect a QuadroE1/T1 to a Quadro16x and configure both devices so that the QuadroE1/T1 can be used as a PSTN trunk extension for the Quadro16x. This will allow the users of the Quadro16x to have up to 30 emulated PSTN lines. The QuadroE1/T1 is a VoIP gateway that allows connectivity between the PSTN and a VoIP network via its E1/T1 lines using CAS/CCS signaling. E1, the European system, allows 30 active timeslots both for CAS and CCS. T1, the United States system, allows 24 timeslots if CAS is used and 23 if CSS is used. This document describes only the configuration procedures required for the described scenario. For more information on the setup of the Quadro16x or the QuadroE1/T1, please refer to Administrator’s Guide for the corresponding device found in the Downloads section of Epygi’s Technical Support Center (www.epygi.com). 2 References • Manual II: Administrator’s Guide for QuadroE1/T1 • Manual II: Administrator’s Guide for Quadro4x, Quadro4xi, Quadro16x and Quadro16xi 3 Requirements 3.1 Requirements to Quadro16x SW-Version 3.1.12, or higher running on the Quadro16x. red. • • The Quadro16x is connected to the network and appropriately configu • DHCP server functionality is activated on the LAN of the Quadro16x. • trunk and appropriately configured. It is possible to make/accept calls to/from the provider. 3.2 Requirements to QuadroE1/T1 • SW-Version 3.1.4, or higher running on the QuadroE1/T1. The QuadroE1/T1 is connected with the service provider via an E1/T1 PAGE 3 27-Apr-06

QuadroE1/T1 Manual II: Administrator's Guide QuadroE1/T1 (SW Version 2.4.x) Edition 1, for QuadroE1/T1, SW Release 2.4.62 and higher, December 2004 QuadroE1/T1 Manual II: Administrator's Guide QuadroE1/T1 (SW Version 2.4.x) Table of Contents Manual I: see Installation Guide Step-by-step guide to install and configure Quadro basically. Manual II: Administrator's Guide About this Guide...................................................................................................................4 Quadro’s Graphical User Interface .......................................................................................5 Administrator’s Main Page ...............................................................................................................5 Recurrent Buttons............................................................................................................................6 Recurrent Functional Buttons ..........................................................................................................6 Entering a SIP Addresses correctly ..................................................................................................6 Administrator’s Graphical User Interface .............................................................................8 System Menu ...................................................................................................................................8 Basic Configuration Wizard ................................................................................................................................8 Status...........................................................................................................................................................10 General Information...................................................................................................................................11 Network Status..........................................................................................................................................11 Lines Status ..............................................................................................................................................13 Hardware Status........................................................................................................................................14 SIP Registration Status...............................................................................................................................14 Call Routing Status ....................................................................................................................................14 IP Routing Configuration..................................................................................................................................15 Configuration Management ..............................................................................................................................17 Events ..........................................................................................................................................................19 Time/Date Settings.........................................................................................................................................21 Mail Settings..................................................................................................................................................21 Firmware Update............................................................................................................................................23 Networking Tools............................................................................................................................................24 Diagnostics....................................................................................................................................................24 Telephone Users Menu................................................................................................................... 25 User Management ..........................................................................................................................................25 Change Password ...........................................................................................................................................30 Telephony ...................................................................................................................................... 31 Call Statistics .................................................................................................................................................31 SIP Settings...................................................................................................................................................33 RTP Settings ..................................................................................................................................................35 Line Settings..................................................................................................................................................36 E1/T1 Settings ...............................................................................................................................................38 Gain Control ..................................................................................................................................................43 Call Routing ...................................................................................................................................................44 Internet Uplink...................................................................................................................49 PPP Dial Settings ............................................................................................................................................49 Advanced PPP Settings....................................................................................................................................50 ISP Authentication Settings .............................................................................................................................50 Security ......................................................................................................................................... 51 Firewall and NAT ............................................................................................................................................51 Advanced Firewall Settings..........................................................................................................................52 Filtering Rules ................................................................................................................................................52 Service Pool ..............................................................................................................................................54 IP Pool .....................................................................................................................................................55 LAN Services.................................................................................................................................. 57 DNS Settings .................................................................................................................................................57 DHCP Settings for the LAN Interface .................................................................................................................57 Registration Form .......................................................................................................................... 58 Logout ........................................................................................................................................... 58 Quadro’s Call Codes............................................................................................................59 Establishing a call .......................................................................................................................... 59 Using Quadro’s PBX Services ......................................................................................................... 59 Administrator Login ....................................................................................................................... 59 QuadroE1/T1 Manual II: Administrator's Guide QuadroE1/T1 (SW Version 2.4.x) Quadro’s Auto Attendant Services......................................................................................60 Call Codes Available Within the Auto Attendant............................................................................. 60 Appendix: System Default Settings ....................................................................................61 Appendix: Glossary.............................................................................................................64 Appendix: Software License Agreement .............................................................................70 QuadroE1/T1 Manual II: Administrator's Guide About this Administrator's Guide QuadroE1/T1; (SW Version 2.4.x) 4 About this Guide The QuadroE1/T1 Manual is divided into two parts: • Manual-I: Installation Guide gives step-by-step instructions to provision the Quadro and configure the phone extension with the Epygi SIP Server. After successfully configuring the Quadro, a user will be able to make SIP phone calls to remote Quadro devices, make local calls to the PSTN and access the Internet from devices connected to the LAN. • Manual-II: Administrator's Guide explains all QuadroE1/T1 management menus. It includes the available call codes and a list of all System Default Values, too HUQuadro’s Graphical User InterfaceUH introduces the Quadro's graphical user interface and explains all recurrent buttons. UAdministrator’s Graphical User InterfaceU explains each of the Administrator's management on the main page of the Quadro management. UQuadro’s Call CodesU describes the Quadro’s call codes that enable the user to navigate through Quadro’s services from a phone handset. Quadro’s Auto Attendant ServicesU explains the operation of the Quadro's auto attendant and lists the call codes that may be used to enter the auto attendant. UAppendix: System Default SettingsU lists all factory defaults. Appendix: Glossary defines some technical terms. Appendix: Software License Agreement includes the terms and conditions of using the Quadro's hardware and software.