Ergotron StyleView Manuals

1 5 6 2 3 4 1 5 2 3 4 12˚ 20" (508 mm) 3x 16” (406 mm) www.ergotron.com USA: 1-800-888-8458 Europe: +31 (0)33-45 45 600 China: 400-120-3051 Japan: [email protected] 777-24-045-G-01 rev. D • 03/19 STYLEVIEW® QUICK REFERENCE RANGE OF MOTION Release Brake to move riser. ERGONOMICS Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. Clear worksurface 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage.

1 5 6 2 3 4 1 5 2 3 4 20" (508 mm) +12˚ 5˚ 20˚ 12˚ 180˚ 5" (127 mm) www.ergotron.com USA: 1-800-888-8458 Europe: +31 (0)33-45 45 600 China: 400-120-3051 Japan: [email protected] 777-24-024-G-00 rev. E • 03/19 STYLEVIEW® QUICK REFERENCE ERGONOMICS Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! RANGE OF MOTION Loosen knob, tilt Display to desired position then retighten knob. CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage. Wheel Rotation Wheel Rotation and Swivel Locked

1 5 6 2 3 4 1 5 2 3 4 14mm 10mm 20" (508 mm) 5" (127 mm) 12˚ 25˚ +12˚ STYLEVIEW® QUICK REFERENCE For more information on this or other Ergotron products, visit our website: www.ergotron.com EN 777-24-006-G-00 rev.A • 08/10 ERGONOMICS RANGE OF MOTION Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it. If adjustments are diffi cult and do not stay in the desired position, follow the instructions to loosen or tighten the tension to create a smooth, easy adjustment motion. Depending on your product and the adjustment, it may take several turns to notice a diff erence. NOTE: Adjustment may require 40 - 60 revolutions.

1 5 6 2 3 4 1 5 2 3 4 5" (127 mm) 25˚ +12˚ 20" (508 mm) 12˚ STYLEVIEW® QUICK REFERENCE For more information on this or other Ergotron products, visit our website: www.ergotron.com EN 777-24-005-G-00 rev.A • 08/10 ERGONOMICS RANGE OF MOTION Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! Release Brake to move riser. Loosen knob, tilt Display to desired position then retighten knob.

5˚ 20˚ +12˚ 180˚ 20" (508 mm) 5" (127 mm) 1 5 6 2 3 4 1 5 2 3 4 3x 16” (406 mm) 12˚ www.ergotron.com USA: 1-800-888-8458 Europe: +31 (0)33-45 45 600 China: 400-120-3051 Japan: [email protected] 777-24-046-G-01 rev. D • 03/19 STYLEVIEW® QUICK REFERENCE Release Brake to move riser. Loosen knob, tilt Display to desired position then retighten knob. ERGONOMICS RANGE OF MOTION Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. Clear worksurface 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage.

1 5 6 2 3 4 1 5 2 3 4 12˚ 20" (508 mm) EN STYLEVIEW® QUICK REFERENCE 777-24-018-G-00 rev.B • 07/12 ERGONOMICS RANGE OF MOTION Working customize - to your size 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed. 4 Work with elbows bent at about 90° to minimize muscle strain. 5 If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information. 6 Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery charged and computer running. Moving stow - before you go 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tuck away open trays and return mouse, scanner and other accessories to their places. 3 Unlock both front casters. 4 Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain. 5 Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day! Release Brake to move riser.

*UHY&ವ RI (OHFWULF/LIW&DUW ZLWK/&'$UPDQG/L)H3RZHU6\VWHP www.ergotron.com USA: 1-800-888-8458 Europe: +31 (0)33-45 45 600 China: 400-120-3051 Japan: [email protected] 6W\OH9LHZSRZHUHGFDUWVSURYLGHHOHFWULFDO$&SRZHU IRUPRELOHSRLQWRIFDUHFRPSXWLQJHTXLSPHQWLQD KHDOWKFDUHHQYLURQPHQW7KHFDUWVDUHQRWLQWHQGHGWR SRZHUPHGLFDOSURGXFWVRUGHYLFHV2XWOHWVDUHSURYLGHG WRSRZHULQIRUPDWLRQWHFKQRORJ\HTXLSPHQWRQO\VXFKDV FRPSXWHUHTXLSPHQWDQGFRPSXWHUSHULSKHUDOV )HDWXUHV 6SHFLᅧFDWLRQV  6HWXS  $GMXVWPHQW %DWWHU\&KDUJH'LVFKDUJH &KDQJH)XVH$PS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³RO)UDQ©DLV'HXWVFK1HGHUODQGV,WDOLDQR6YHQVND㡴㦻崭㻘幼

1 of 8 888-97-319-W-02 rev. F • 04/19 www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected] English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语 StyleView®Scanner Shelf 7 6 3 Max weight: 2 lbs (1 kg) SV Cart & Head Unit • Option 1 - LCD Carts • Option 2 - Laptop Carts • Option 3 - Wall Track • Option 4 - Back of SV Cart User's Guide English For the latest User Installation Guide please visit: www.ergotron.com

1 of 18 888-97-333-G-00 rev. A • 09/13 Reduce Reuse Recycle StyleView® Telepresence Kit for Single LCD Cart Safety ........................................................................................................................2 Features & Specifi cations ...................................................................................................... 3 Tools Needed & Components ................................................................................................4 Drawer ................................................................................................................................5 - 9 CPU Holder .....................................................................................................................10 - 12 Camera Shelf ..................................................................................................................13 - 14 Adjustment .......................................................................................................................... 15 To Stop Independent LCD Lift ..............................................................................................16 Maintenance & Safety ...................................................................................................17 - 18 For local customer care phone numbers visit: http://contact.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Benutzerhandbuch - Deutsch Gebruikersgids - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語 用户指南 : 汉语 www.ergotron.com ENGLISH User Guide NOTE: This kit is intended to be attached to a cart with single LCD pivot and one drawer.

888-97-366-G-00 rev. C • 03/15 1/9 A B C 1 1x 14mm (9/16") 1x 1x M3 x 25mm StyleView® Telemedicine Bin 1x < 2 lbs (1 kg) 2x M4 x 12mm User Guide User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Gebruikersgids - Nederlands Benutzerhandbuch - Deutsch Guida per l’utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語 用户指南 : 汉语 www.ergotron.com ENGLISH CAUTION: Close worksurface before opening drawers. Open only one drawer at a time. Do Not push cart when drawers or worksurface are open. Failure to follow these instructions may cause the cart to be unstable. WARNING IMPACT HAZARD! MOVING PARTS CAN CRUSH AND CUT. Minimize Lift Tension BEFORE: · Removing Mounted Equipment. · Shipping Cart · Storing Cart To Minimize Lift Tension 1. Lower worksurface to lowest position. 2. Turn adjustment nut at top of riser counterclockwise until it stops (Adjustment may require 40-60 revolutions). Failure to heed this warning may result in serious personal injury or property damage! For More information and instructions refer to product guide at http://4support.ergotron.com or contact Ergotron Customer Care at 1-800-888-8458. 822-052 14mm (9/16”) NOTE: When removing drawers from the cart, make sure to disconnect the cable.