Escali W6630 Manuals

Stainless Steel Washdown Scale Model # W6630 www.escali.com PRODUCT MANUAL 2 INTIAL SETUP The platform of the scale should be unloaded before powering on the scale. Press the ON/OFF key to power on the scale. Wait a few seconds while the scale is started up with a display test. WEIGHING AN ITEM 1. Select your desired unit of measurement by pressing the U key. 2. Gently place an item onto the platform. 3. The weight of the item will appear on the display. TARE FEATURE This feature allows you to obtain the exact weight of an item in a container by subtracting the weight of the container. 1. Gently place the container without the item on the platform. 2. Press the TARE key. The weight of the container will be removed, and the display will reset to zero. 3. Slowly add the item to the container. The display will show the weight of the item only. 4. You may continue to determine the weight of each additional item as they are added by repeating steps 2 & 3. PRODUCT KEY DESCRIPTION 3 RECALLING GROSS WEIGHT After taring an item, press the G/N key to recall the gross weight of the items previously tared. Press G/N key again to return to your net weight. TARE MEMORY: STORING A TARE 1. Press the PLU key; [PLUPro] will now be displayed. 2. By using the RIGHT or LEFT arrow keys, scroll through the options until [tLUPro] is displayed. 3. Press the ENTER key, located in the middle of the arrow keys; [tLU 01] will now be displayed. 4. Select a memory slot number by pressing the UP or DOWN arrow keys. You can store up to 20 different tare settings. 5. Press the ENTER key when you have determined your memory slot number. 6. Enter a tare value you would like to store into memory by using the arrow keys. (UP/DOWN to modify digit, RIGHT/LEFT to move to a different digit) 7. Press the ENTER key to save the tare value. [tLUPro] will now be displayed; Press the U key to return to weighing mode. TARE MEMORY USE 1. While in weighing mode with no items on the platform, press and hold the TARE key until [tLU 01] is displayed. 2. Using the UP or DOWN arrow keys, select the memory slot number you want to use, and press the ENTER key to confirm. 3. The scale will now display the tare value with a negative sign. Now you can place an item on the platform, and the tare value will be deducted from your net value. 4 AUTO TARE FEATURE This allows a container to automatically be deducted without pressing the TARE key. (NOTE: The scale detects and tares the first item placed onto the platform.) ACTIVATE AUTO TARE 1. Press the PLU key. [PLUPro] will be displayed. Use the RIGHT or LEFT arrow keys to scroll through the options until [AUt-t] is displayed; press the ENTER key. 2. [AUt - t0] is now displayed. Use the UP or DOWN arrow keys to select the following: [ t0 ]—disable Auto Tare, [ t1 ]—Enable Auto Tare. After determining your selection, press the ENTER key. 3. [AUt-t] is now displayed again, press the U key to return to weighing mode. Repeat previous steps to disable the Auto Tare feature. ACCUMULATIVE WEIGHING This feature adds up all weighing values, and displays a total value. To accumulate the weighing values: 1. Place an item on the platform. 2. When the display shows a stabilized weight value, press the M+ key to add the weight value to the total. 3. Remove item, and repeat steps 1 & 2 for additional items. 4. Press the MR key to recall the total accumulated value. 5. To erase the total accumulated value, press the MC key or power off the scale. COUNTING FEATURE The counting feature is used to count the same type of item to ensure accurate counting. You can use sample sizes of 10, 20, 30, 50, or 100. HOW TO SET A SAMPLE SIZE 1. While your display is reading zero on weigh mode, press and hold