Esprit Tech EX5 Manuals

1 pdf manual(s) Esprit Tech EX5 for free download (Document Types: Operation & user’s manual)

Esprit Tech EX5 Operation & user’s manual [PDF] (9 pages)

  • Identifier: id-1852631
  • Brand: Esprit Tech
  • Device: EX5 Extender
  • Type: PDF
  • Key Aspects: System Limitations and Considerations, Risk Mitigation and Accident Prevention, Package Contents and Accessories List
  • UPD Date: 04.09.2026
  • Source File: 1870131.pdf
  • Pages: 9
  • Description: Setup and usage guide for the Esprit Tech EX5.
Pages Preview:
  • 2 INSTALLATION Install the EX5 in parallel to the flight axes, as close to the center of gravity as possible. By default, the axes printed on the device point in the direction of flight: x=front, y=right, z=top. In case you need to install the EX5 in a different direction, please keep in mind that the arrows on the device must be parallel to the flight axes. In such case, the resulting orientation of the device must be set in the configuration menu. Please
  • 3 Multiple installations in a complex model: Use this installation scheme if you need up to 16 servo channels with (optional) flight stabilization. You can use conversion cables for the output ports 1-3 to be used with MR30 connectors. Use the satellite receivers Rx1 or Rx2 without unnecessary servo outputs. Compatibility: EX Bus, SUMD, S.Bus, SRXL. EX Bus: Bidirectional control, configuration and telemetry for all attached devices/sensors. SUMD: Use port
  • 4 USAGE The EX5 can be used with or without enabled flight stabilization. Install the device according to one of the recommended setups as shown in the previous chapter.  First configure the model type, servo endpoints, differentials and subtrims in the transmitter according to your preferences. Do not use advanced mixes with curves, or servo balancer function. Simple linear mixes without delays are allowed.  Configure an additional transmitter chann
  • 5 Stabilization Modes and Channel Switch You can use up to three flight stabilization modes operated by a dedicated transmitter channel.  Manual – flight stabilization is disabled and the EX5 just passes channel data from the receiver(s).  Acro – standard flight stabilization with configurable rate/heading gains. You can decide which axes will be controlled by just rate gains (so called Normal or Damping mode) with heading gain disabled. With add
  • 6 TELEMETRY AND SETTINGS The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into four sections:  Actual values – displays the latest telemetry values (gyro rate, acceleration, attitude, voltage, temperature, system status) together with minimums and maximums. o Attitude R/P/Y - shows the current device orientation – roll, pitch and yaw. o Acc <Cal> X.XG – displays the acceleration measured on each axis. Total accel
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Esprit Tech (1) 321.729.4287 P.O. Box 360815 [email protected] Melbourne, FL https://www.espritTech.com 32936, USA USER MANUAL The Servo Expander EX5 is an intelligent bus manager compatible with several radio control systems. The device converts serial bus signal from up to two receivers to either standard PWM servo outputs, or configurable bus outputs. It offers up to five configurable and high-power servo ports with optional period and fail-safe setting. The EX5 offers flight stabilization using the integrated MEMS gyroscope/accelerometer. Up to three configurable flight modes can be used, each with different stabilization gains and settings. In connection with other devices from our production, such as SE4 or SE6, you can create a complex installation with just a few signal/power cables. Supported protocols: Receiver manufacturer Futaba Graupner JETI Multiplex Supported input serial protocol S.Bus SUMD EX Bus SRXL 12ch, SRXL 16ch Output serial protocol S.Bus SRXL 16ch EX Bus SRXL 16ch Telemetry No HoTT telemetry Yes No Configuration JETIBOX SMART BOX, transmitter JETIBOX, transmitter JETIBOX Flight stabilization Yes Yes Yes Yes No. Stabilized channels Up to 16 Up to 16 Up to 16 Up to 16 FEATURES - Small dimensions and high current throughput via the integrated MR30 power connectors. - 5-channel servo/bus expander. - Flight stabilization offering 3 configurable flight modes. - Gyro-stabilized servo outputs, EX Bus, SRXL16ch. or S.Bus. - Automatic detection of stabilization channels – even with mixes. - Automatic detection of device alignment in the model. - Telemetry (RC system dependent): temperature, voltage, attitude (roll/pitch/yaw), G-force. - Automatic detection of serial data/telemetry after startup. - Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX). - Firmware updates via USB interface. EX5 Dimensions (including connectors) 38 x 26 x 12mm Weight (including connectors/cables) 14g Servo output channels Up to 5 Operating current 15mA Operating temperature -20 – 85°C Supply Voltage 4 – 14V (recommended 5-8.4V) Continuous current 15A Peak current 60A (2sec) Supported protocols JETI Duplex, Multiplex, Graupner Hott, Futaba S.Bus Status LED YES Sensor expander EX Bus: up to 4 sensors Gyro range ±2000dps Accelerometer range ±30G Maximum cable length 2m

Esprit Tech EX5: Extender Category Related Instructions

DAP-1520
D-Link DAP-1520
05.07.2026 4 pages

DAP-1520 Wi-Fi Dual Band Range Extender If any of the above items are missing, contact your reseller. Package Contents • DAP-1520 Wi-Fi Dual Band Range Extender • Wi-Fi Configuration Card • Quick Install Guide Product Overview Recommended Placement LED C Comprehensive instruction manual for the D-Link DAP-1520 Extender. It explains configuration options and supported accessories, error handling, menu navigation, product safety.

CONVERGE PRO 2
ClearOne CONVERGE PRO 2
22.06.2026 22 pages

Touch Panel Controller for CONVERGE® Pro 2 Quick-Start Guide Owner’s guide for the ClearOne CONVERGE PRO 2 Controller. The manual guides users through shutdown procedures, usage procedures, operational safety, warranty information.

KD-IP120TX
Key Digital KD-IP120TX
16.03.2026 10 pages

Key Digital®, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital® is at the forefront of the video i Owner’s manual for the Key Digital KD-IP120TX Extender. It describes step-by-step basic operation, service instructions, maintenance guidelines, troubleshooting tips.

RE190
TP-Link RE190
01.06.2026 51 pages

For technical support, the user guide and other information, please visit https://www.tp-link.com/support/, or simply scan the QR code. NWS.TP-Link Portugal, Unipessoal, Lda. Avenida da Liberdade, n°245, 7°E, 1250-143 Lisboa, Portugal TP-Link Deutschland Gmb Reference manual for the TP-Link RE190 Extender. This manual covers installation, operation, and product handling, installation steps, product safety, safety features.