ETC REsponse Manuals

ETC Setup Guide Response MIDI Gateway Corporate Headquarters  Middleton, WI, USA  Tel +608 831 4116  Service: (Americas) [email protected] London, UK  Tel +44 (0)20 8896 1000  Service: (UK) [email protected] Rome, IT  Tel +39 (06) 32 111 683  Service: (UK) [email protected] Holzkirchen, DE  Tel +49 (80 24) 47 00-0  Service: (DE) [email protected] Hong Kong  Tel +852 2799 1220  Service: (Asia) [email protected] Web: etcconnect.com  © 2018 Electronic Theatre Controls, Inc. Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 4267M2240  Rev A  Released 2018-05 Overview The Response MIDI Gateway supports sending and receiving MIDI (Musical Instrument Digital Interface) control signals. MIDI enables various types of equipment to communicate, control and synchronize with each other through the transmission of digital data. For MIDI output the signal is generated by the controlling device and transmitted to the MIDI Gateway over USB or an Ethernet network to be output locally at the gateway. The gateway itself does not generate MIDI messages. MIDI Connections The following connections are available: • MIDI In - allows communication from a MIDI device to a Net3 controller, ACN controller or USB MIDI receiver through the gateway. The input accepts MIDI notes, MIDI Show Control packets and MIDI Time Code. • MIDI Thru - allows communication between multiple MIDI devices by passing the input through the gateway and back out to another MIDI device. • MIDI Out - allows communication with a MIDI device from a Net3, ACN or USB control source through the gateway. Outputs MIDI notes, MIDI Show Control packets and/or MIDI Time Code. The pinouts for the MIDI connections are as follows: LED Indicators • Power - solid blue indicates that power is supplied • Ethernet - solid green indicates network connection and blinking indicates network activity • USB - solid green indicates USB connection and solid red indicates connection without having fully detected, identified and loaded device drivers MIDI Out port MIDI Thru port MIDI In port Navigation buttons LED indicators 3 1 5 2 4 3 1 5 2 4 3 1 5 2 4 N/C Thru+ N/C Thru- Shield N/C In+ N/C In- N/C N/C Out+ N/C Out- Shield MIDI In MIDI Out MIDI Thru

ETC Setup Guide Response Four-Port DIN Rail Mounted Gateway Corporate Headquarters  Middleton, WI, USA  Tel +608 831 4116  Service: (Americas) [email protected] London, UK  Tel +44 (0)20 8896 1000  Service: (UK) [email protected] Rome, IT  Tel +39 (06) 32 111 683  Service: (UK) [email protected] Holzkirchen, DE  Tel +49 (80 24) 47 00-0  Service: (DE) [email protected] Hong Kong  Tel +852 2799 1220  Service: (Asia) [email protected] Web: etcconnect.com  © 2017 Electronic Theatre Controls, Inc. Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 4260M2220  Rev B  Released 2017-03 Overview The DMX/RDM Four-Port DIN Rail Mounted Gateway is a network data distribution device for lighting systems that supports protocols including Net3 (sACN), DMX, and Remote Device Management (RDM). It mounts to standard 35mm symmetric DIN rail. For information on the portable Four-Port Gateway, see the Four-Port Gateway Setup Guide. All ETC documentation is available for download on our website at www.etcconnect.com. Configuration for DMX/RDM gateways is performed using NET3 Concert Software. The latest version of this software is available on www.etcconnect.com and includes an in-depth help system. All DMX/RDM gateways are powered by 802.3af Power over Ethernet (PoE) or 12-24VDC power. Note: Network wiring should be installed and terminated by a qualified network installer and follow standard Ethernet wiring practice.