Euromold 400A-24B Manuals

CAUTION : Read instructions thoroughly and completely prior to beginning installation. For indoor applications Installation instructions for in air bushing - Type C interface 400A-24B 630 A - Up to 24 kV This product should be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment. These instructions are not intended as a substitute for adequate training or experience in such safety practices. These instructions do not attempt to provide for every possible contingency. Failure to follow these instructions could result in damage to the product and serious or fatal injury. IMPORTANT : Cable and associated apparatus must be de-energised, locked out, and tagged prior to product installation. a Nexans company IMPORTANT NOTES : - EUROMOLD bushings are supplied with protective caps over the mating interface offering protection against mechanical damage and the ingress of any contaminant. Under no circumstances should this shipping cap be considered as an electrical dead-ending device. - EUROMOLD bushings should never be energised in isolation neither should they be disconnected whilst energised. They should always be connected to one of the recommended mating parts or the electrical dead-ending device : K400DR-B or K400DR-B/G. - Do not paint the interface. Page 1 of 3 IS90122-ENG - 400A-24B 8 October 2013 - Revision 3 - Supersedes edition of January 2003 IS90122-ENG - 400A-24B - Revision 3 ! FOR INFORMATION ONLY Please always use the instructions supplied in the kit !